2 layers87.6 × 72.6 mm
Cw isolator powered
colinoflynn/phase-modulation-sca
Resources to demonstrate phase modulation leakage including over JTAG
68 parts8
Overview
The ADE-1+ is a RF Mixer made by Mini-Circuits in a SMD-6P,7.9x5.6mm package with 6 pins. -40℃~+85℃ 40mA SMD-6P,7.9x5.6mm RF Mixers ROHS.
PCBKit's library has its KiCad symbol (Analog & Interface:ADE-1+, from CERN's library) and its footprint (ICs And Semiconductors SMD:MINI-CIRCUITS_CD636, from CERN's library), ready for a KiCad board. JLCPCB lists it (part C2942210). 8 open-source boards in 6 repositories on GitHub use it.
Symbol
Footprint
Parameters
11- Current - Supply
- 40mA
- Gain/Loss
- 5dB
- IF Frequency Range
- 0Hz~500MHz
- IP3
- 15dBm
- Isolation(L-I)
- 65dB
- Isolation(L-R)
- 70dB
- LO Frequency Range
- 500kHz~500MHz
- Number of Channels
- 1
- Operating Temperature
- -40℃~+85℃
- P1dB
- 1dBm
- RF Frequency Range
- 500kHz~500MHz
Order codes
1- ADE-1+LCSC C2942210
Pinout
6| Pin | Name | Type |
|---|---|---|
| 1 | GND | Power in |
| 2 | IF | Output |
| 3 | RF | Input |
| 4 | GND | Power in |
| 5 | GND | Power in |
| 6 | LO | Input |
Open-source boards using it
All 8- 4 layers54.3 × 76.1 mm
Phase interferometer
mpkendall/phase-interferometer
A 2(or more)-element phase interferometric direction finder for 433 MHz using a passive phased array
78 parts3 - 4 layers99.7 × 99.7 mm
Diode tayloe sdr
SomethingFourier/SDR-Receiver
Super Heterodyne Direct Conversion Hybrid I/Q SDR Receiver
279 parts3 - 4 layers96 × 90.2 mm
Transceiver
ngrabbs/ember
Open pvpanel.kicadpro with KiCad 10. The project contains the recovered schematic, routed PCB, project-local footprint libraries, and solar-module STEP model.
161 parts1CC0-1.0 - 4 layers74.4 × 57.3 mm
Mts demod
mahdi-kh1265/mts-electronics
Analog RF, photodetector, and demodulation electronics for POSM's modulation-transfer spectroscopy (MTS) laser-locking system.
90 partsMIT - 2 layers55.1 × 112.5 mm
Cw optics cwside
colinoflynn/phase-modulation-sca
Resources to demonstrate phase modulation leakage including over JTAG
44 parts8 - 2 layers82.8 × 46.5 mm
Jtag mixer
colinoflynn/phase-modulation-sca
Resources to demonstrate phase modulation leakage including over JTAG
27 parts8 - 2 layers26.2 × 25.8 mm
Mixer
kholia/ConsensusBasedTimeSync
A portable, efficient, passive, consensus based (relative) time synchronization mechanism over radio waves. Cost-effective radio receivers too!
8 parts7
Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/mini-circuits/ADE-1%2B" title="ADE-1+ in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/mini-circuits/ADE-1%2B.jpg" alt="ADE-1+" width="1200" height="900">[](https://pcbkit.io/parts/mini-circuits/ADE-1%2B)Questions
Is there a KiCad symbol and footprint for the ADE-1+?
Yes. The symbol is Analog & Interface:ADE-1+ and the footprint ICs And Semiconductors SMD:MINI-CIRCUITS_CD636, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ADE-1+?
SMD-6P,7.9x5.6mm, with 6 pins. Its footprint is drawn on this page.
Where is the ADE-1+ datasheet?
Mini-Circuits publishes it: the Datasheet link on this page opens it.
Where can I order the ADE-1+?
JLCPCB lists it as part C2942210, with 0 in stock; the sellers' links on this page open their listings.
What can replace the ADE-1+?
Parts like it in the library: the ADE-2+ by Mini-Circuits. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the ADE-1+?
8 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.
