Skip to the content
PCBKitNew board
TC4427ACOA, in 3D

TC4427ACOA

Microchip Technology

0℃~+70℃ 1.5A 1.5A 100uA 2 25ns 25ns 4.5V~18V MOSFET SOIC-8 Gate Drivers ROHS

Extended
DatasheetJLCPCBLCSCmicrochip/TC4427ACOA
Category
Gate Drivers
Package
SOIC-8
Pins
8

Overview

The TC4427ACOA is a gate Driver made by Microchip Technology in a SOIC-8 package with 8 pins. 0℃~+70℃ 1.5A 1.5A 100uA 2 25ns 25ns 4.5V~18V MOSFET SOIC-8 Gate Drivers ROHS.

PCBKit's library has its KiCad symbol (Analog & Interface:TC4427ACOA, from CERN's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 204 are in stock at JLCPCB (part C636886). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

INA2INB4NC1VDD6OUTA7OUTB5NC8GND3
Analog & Interface:TC4427ACOAFrom CERN's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Parameters

13
Current - Output High(IOH)
1.5A
Current - Output Low(IOL)
1.5A
Fall Time
25ns
Input Logic Level - High
2.4V
Input Logic Level - Low
800mV
Load Type
MOSFET
Number of Drivers
2
Operating Temperature
0℃~+70℃
Propagation Delay tpHL
30ns
Propagation Delay tpLH
30ns
Quiescent Current(Iq)
100uA
Rise Time
25ns
Voltage - Supply
4.5V~18V

Order codes

1

Pinout

8
The pins of the TC4427ACOA
PinNameType
1NCPower in
2INAInput
3GNDPower in
4INBInput
5OUTBOutput
6VDDPower in
7OUTAOutput
8NCPassive

Open-source boards using it

All 3
  • 2 layers90 × 76 mmKAPTON HEATERV2, the printed circuit board in 3D

    KAPTON HEATERV2

    AslanLauzon/KAPTON-CONNECTOR

    This system uses a 24V, 14.6A Kapton trace heater to regulate the pressure inside a nitrous oxide oxidizer tank, particularly in colder environments where vapor pressure drops below optimal levels.

    33 parts
  • 4 layers100 × 80 mmLamp rev a, the printed circuit board in 3D

    Lamp rev a

    laminarforge/laminarforge-cad

    Parametric CAD models (Rust + vcad) for LaminarForge open-source LAMP diagnostics device

    107 parts
  • 2 layers90 × 90 mmKAPTON HEATERV2, the printed circuit board in 3D

    KAPTON HEATERV2

    Queens-Rocket-Engineering-Team/prop-ecad

    All PCB and electrical schematics for the propulsion team

    22 parts

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/microchip/TC4427ACOA" title="TC4427ACOA in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/microchip/TC4427ACOA.jpg" alt="TC4427ACOA" width="1200" height="900">
A picture that opens the part, for a README
[![TC4427ACOA](https://pcbkit.io/embed/parts/microchip/TC4427ACOA.jpg?size=s)](https://pcbkit.io/parts/microchip/TC4427ACOA)

Questions

Is there a KiCad symbol and footprint for the TC4427ACOA?

Yes. The symbol is Analog & Interface:TC4427ACOA and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TC4427ACOA?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the TC4427ACOA datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the TC4427ACOA?

JLCPCB lists it as part C636886, with 204 in stock; the sellers' links on this page open their listings.

What can replace the TC4427ACOA?

Parts like it in the library: the EG2131 by EG, the SLM2186CA-DG by Sillumin, the UCC27524D by Texas Instruments and the IR2104STRPBF by Infineon Technologies. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TC4427ACOA?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8