Skip to the content
1234

TC1264-3.3VDB

Microchip TechnologyExtended

-40℃~+125℃ 1 130uA 3.3V 64dB@(1kHz) 6V 800mA Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Part id
microchip/TC1264-3.3VDB
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-223
Pins
4
In stock
71 at JLCPCB (C638656)
Used on
4 open-source boards

Overview

The TC1264-3.3VDB is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Microchip Technology in a SOT-223 package with 4 pins. -40℃~+125℃ 1 130uA 3.3V 64dB@(1kHz) 6V 800mA Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT_4GND, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SOT-223, from KiCad's library), ready for a KiCad board. 71 are in stock at JLCPCB (part C638656). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

1IN3OUT2GND
Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT_4GNDFrom PCBKit's generic symbols

Footprint

1234
Package_TO_SOT_SMD:SOT-223From KiCad's library

Pinout

4
The pins of the TC1264-3.3VDB
PinNameType
1INPower in
2GNDPower in
3OUTPower out
4GNDPassive

Open-source boards using it

4
  • 2 layers101.8 × 57.8 mmSc64v2, the printed circuit board in 3D

    Sc64v2

    Polprzewodnikowy/SummerCart64

    SummerCart64 - a fully open source N64 flashcart

    96 parts1.2kGPL-3.0
  • 2 layers101.8 × 57.8 mmSc64v2.1, the printed circuit board in 3D

    Sc64v2.1

    Epicjoy/SC64

    This project's hardware and casing are modified based on the SummerCart64 project.

    97 parts15
  • 4 layers101.5 × 43.6 mmAlcantara v.1.0, the printed circuit board in 3D

    Alcantara v.1.0

    zenitheesc/Alcantara

    Mobile Ground Station for stratospheric probe monitoring and rescue. Goes well with the Zenith Monitor app.

    90 parts5
  • 4 layers71 × 56 mmRPI RADIO, the printed circuit board in 3D

    RPI RADIO

    Aliou8/RadioPiLink

    est un projet IoT qui permet de transmettre des données radio d’un microcontrôleur STM32WLE5 vers un Raspberry Pi, puis de les relayer vers un réseau local pour un traitement et une visualisation .

    56 partsGPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TC1264-3.3VDB?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT_4GND and the footprint Package_TO_SOT_SMD:SOT-223, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TC1264-3.3VDB?

SOT-223, with 4 pins. Its footprint is drawn on this page.

Where is the TC1264-3.3VDB datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the TC1264-3.3VDB?

JLCPCB lists it as part C638656, with 71 in stock; the sellers' links on this page open their listings.

What can replace the TC1264-3.3VDB?

Parts like it in the library: the NCP1117ST33 by onsemi, the AZ1117H-3.3TRE1 by Diodes Incorporated, the LD1117AG-33-AA3-A-R by UTC and the AZ1117CH-3.3TRG1 by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TC1264-3.3VDB?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.