2 layers101.8 × 57.8 mm
Sc64v2
Polprzewodnikowy/SummerCart64
SummerCart64 - a fully open source N64 flashcart
96 parts1.2kGPL-3.0
4 layers71 × 56 mm
RPI RADIO
Aliou8/RadioPiLinkest un projet IoT qui permet de transmettre des données radio d’un microcontrôleur STM32WLE5 vers un Raspberry Pi, puis de les relayer vers un réseau local pour un traitement et une visualisation .
- Size
- 71 × 56 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 56
- Nets
- 70
- Pads
- 225
- Tracks, vias
- 331, 22
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Nov 2025
- Updated
- 30 Dec 2025
Overview
RPI RADIO is an open-source printed circuit board by Aliou8, from the Aliou8/RadioPiLink repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 71 × 56 mm with 56 parts on 70 nets, routed with 331 tracks and 22 vias.
It is built around the TC1264-3.3VDB. Its parts include 28 capacitors, 6 resistors, 4 diodes, 4 inductors and 3 connectors. It belongs with the radio and wireless and home automation and IoT boards and the STM32 boards of this library.
Main components
1README
README.md
RadioPiLink
RadioPiLink est un projet IoT permettant la transmission de données radio depuis un microcontrôleur STM32WLE5 vers un Raspberry Pi, puis leur relais sur un réseau local pour traitement et visualisation.
Table des matières
Fonctionnalités
- Réception radio sur STM32WLE5
- Passerelle vers Raspberry Pi
- Routage des données vers le réseau local
- Points d'extension pour traitement et visualisation
Architecture
Consultez :
Licence
Ce projet est distribué sous la licence GNU GPL v3. Voir le fichier LICENSE pour les détails.
Contact
Pour toute question ou contribution, ouvrez une issue ou contactez les mainteneurs via la page du dépôt.
Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C6, C7, C8, C13, C19, C23, C24, C28 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R6 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.5mm_Pad | H1, H2, H3, H4 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C18, C22 |
| 2 | 2.2p | Capacitor_SMD:C_0603_1608Metric | C16, C21 |
| 2 | 33p | Capacitor_SMD:C_0603_1608Metric | C20, C26 |
| 2 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C5, C9 |
| 1 | 0.47u | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | 0.7p | Capacitor_SMD:C_0603_1608Metric | C27 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 10p | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 3.3n | Inductor_SMD:L_0603_1608Metric | L3 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 4.3p | Capacitor_SMD:C_0603_1608Metric | C25 |
| 1 | 47n | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 47n | Inductor_SMD:L_0603_1608Metric | L2 |
| 1 | 4p | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | 68p | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | 7.5p | Capacitor_SMD:C_0603_1608Metric | C17 |
| 1 | 8.2n | Inductor_SMD:L_0603_1608Metric | L4 |
| 1 | 9n | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | BOOT | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | Conn_sma | Connector_Coaxial:SMA_Amphenol_132289_EdgeMount | J1 |
| 1 | LED_1 | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LED_2 | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | LED_3.3 | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | LED_5 | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | LOGO | Library:LOGO | G*** |
| 1 | RSET | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW2 |
| 1 | Raspberry_Pi_4 | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J2 |
| 1 | STM32WLE5CCUx | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J4 |
| 1 | TC1264-3.3VDB | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | TXCO | Oscillator:Oscillator_SMD_SeikoEpson_SG8002CE-4Pin_3.2x2.5mm | Y2 |
Similar boards
- 2 layers101.8 × 57.8 mm
Sc64v2.1
Epicjoy/SC64
This project's hardware and casing are modified based on the SummerCart64 project.
97 parts15 - 4 layers101.5 × 43.6 mm
Alcantara v.1.0
zenitheesc/Alcantara
Mobile Ground Station for stratospheric probe monitoring and rescue. Goes well with the Zenith Monitor app.
90 parts5 - 4 layers30.7 × 30 mm
ReCamera B101 v1.2
Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.
56 parts495Apache-2.0 - 4 layers90.8 × 53.3 mm
- 4 layers46 × 40 mm
- 4 layers66.3 × 40.2 mm
Cm4 drone
dridri/bcflight
Raspberry Pi based drone flight controller and remote control
56 parts175GPL-3.0 - 4 layers71 × 10 mm
Ordered jlcpcb 003 dot flipper
pierre-muth/fast-flipdot
Driving a flipdot matrix differently. All dots simultaneously.
56 parts145GPL-3.0
Questions
How big is the RPI RADIO PCB?
It measures 71 × 56 mm and has 4 copper layers, 1.6 mm thick.
What parts does the RPI RADIO use?
56 parts, built around the TC1264-3.3VDB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RPI RADIO KiCad files?
From the Aliou8/RadioPiLink repository on GitHub, at the commit this page was made from: the board is hardware/rpiRadio/RPI_RADIO.kicad_pcb and its schematic hardware/rpiRadio/RPI_RADIO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RPI RADIO design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).