Skip to the content
123

MCP9700A-E/TT

Microchip TechnologyExtended

-40℃~+125℃ 2.3V~5.5V ±2℃ SOT-23 Temperature Sensors ROHS

Part id
microchip/MCP9700A-E/TT
Category
Temperature Sensors
Package
SOT-23
Pins
3
In stock
14,667 at JLCPCB (C127949)
Used on
3 open-source boards

Overview

The MCP9700A-E/TT is a temperature Sensor made by Microchip Technology in a SOT-23 package with 3 pins. -40℃~+125℃ 2.3V~5.5V ±2℃ SOT-23 Temperature Sensors ROHS.

PCBKit's library has its KiCad symbol (dk_Temperature-Sensors-Analog-and-Digital-Output:MCP9700AT-E_TT, from Digikey) and its footprint (Package_TO_SOT_SMD:SOT-23, from KiCad's library), ready for a KiCad board. 14,667 are in stock at JLCPCB (part C127949). 3 open-source boards in 2 repositories on GitHub use it.

Symbol

1VDD2VOUT3GND
dk_Temperature-Sensors-Analog-and-Digital-Output:MCP9700AT-E_TTFrom Digikey

Footprint

123
Package_TO_SOT_SMD:SOT-23From KiCad's library

From the datasheet

10
Supply, least
2.3 V · VDD, recommended operating min · p. 2
Supply, most
5.5 V · VDD, recommended operating max · p. 2
Supply, absolute maximum
6 V · VDD, absolute max · p. 2
Works from
-40 °C · Ambient operating min, Extended Temperature · p. 3
Works up to
125 °C · Ambient operating max, Extended Temperature · p. 3
Junction, hottest
150 °C · Junction temperature absolute max · p. 2
Takes working
6 µA · VDD operating current typical, no load · p. 2
Takes at most
12 µA · VDD operating current max, no load · p. 2
A pin gives at most
30 mA · Output source or sink current absolute max · p. 2
Junction to air (3LD SOT-23)
308 K/W · Junction to ambient thermal resistance typical · p. 3

What it is and has

6
Sensor
Analog temperature sensor · p. 1
Package options
SC70-5, SOT-23-3, TO-92-3 · p. 1
Temperature measurement range
-40°C to +125°C · p. 1
Accuracy
±2°C maximum, 0°C to +70°C · p. 1
Temperature coefficient
10.0 mV/°C typical · p. 1
Capacitive load drive
Optimized to drive large capacitive loads · p. 1

Around it

3
cap 0.1 µF to 1 µF
between VDD and GND; Recommended decoupling; high frequency ceramic capacitor located as close as possible to VDD and GND. · p. 9
res 200
between power supply voltage and VDD; Series resistor for high-noise applications, with a 1 uF decoupling capacitor. · p. 9
cap 1 µF
between VDD and GND; High frequency ceramic decoupling capacitor for high-noise applications, used with the 200 series supply resistor; place close to VDD and GND. · p. 9

Specifications

24
ParameterConditionsAs printedPage
VDD VDDmax 6 V2
Storage Temperaturemin -65 · max 150 °C2
Ambient Temp. with Power Appliedmin -40 · max 150 °C2
Output Currentmin -30 · max 30 mA2
Junction Temperature TJmax 150 °C2
ESD Protection on All PinsHBMmax 4 kV2
ESD Protection on All PinsMMmax 200 V2
Latch-Up Current at Each Pinmin -200 · max 200 mA2
Operating Voltage Range VDDMCP9700/9700Amin 2.3 · max 5.5 V2
Operating Current IDDMCP9700A; VDD = 2.3V to 5.5V, TA = -40°C to +125°C, no loadtyp 6 · max 12 uA2
Line Regulation °C/VDDMCP9700A; VDD = 2.3V to 5.5V, TA = -40°C to +125°C, no loadtyp 0.1 °C/V2
TA = 0°C to +70°C TACYMCP9700A/9701A; MCP9700A tested with VDD = 3.3Vmin -2 · max 2 °C2
TA = -40°C to +125°C TACYMCP9700A; VDD = 3.3Vmin -2 · max 4 °C2
Output Voltage, TA = 0°C V0°CMCP9700/9700Atyp 500 mV2
Temperature Coefficient TCMCP9700/9700Atyp 10 mV/°C2
Output Current IOUTMCP9700A; VDD = 2.3V to 5.5V, TA = -40°C to +125°Cmax 100 uA3
Output Impedance ZOUTIOUT = 100 uA, f = 500 Hztyp 20 3
Output Load Regulation VOUT/IOUTTA = 0°C to +70°C; IOUT = 100 uAtyp 1 3
Turn-On Time tONMCP9700A; VDD = 2.3V to 5.5V, TA = -40°C to +125°C, no loadtyp 800 us3
Typical Load Capacitance CLOADNote 4: characterized and production tested with a capacitive load of 1000 pFmax 1000 pF3
Specified Temperature Range (Note 1) TAMCP9700/9700Amin -40 · max 125 °C3
Operating Temperature Range TAExtended Temperaturemin -40 · max 125 °C3
Storage Temperature Range TAmin -65 · max 150 °C3
Thermal Resistance, 3LD SOT-23 JA3LD SOT-23typ 308 °C/W3

Pins, by the datasheet

3
1 VDD
Supply voltage input. · p. 1
2 VOUT
Analog voltage output proportional to temperature; can connect directly to a microcontroller ADC input. · p. 1
3 GND
Ground. · p. 1

Open-source boards using it

3
  • 2 layers100.3 × 100.3 mmPractica, the printed circuit board in 3D

    Practica

    pcsanchez/Microcontrollers-Lab

    Code and Design for micro controllers class and lab

    63 parts3

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP9700A-E/TT?

Yes. The symbol is dk_Temperature-Sensors-Analog-and-Digital-Output:MCP9700AT-E_TT and the footprint Package_TO_SOT_SMD:SOT-23, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP9700A-E/TT?

SOT-23, with 3 pins. Its footprint is drawn on this page.

Where is the MCP9700A-E/TT datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP9700A-E/TT?

JLCPCB lists it as part C127949, with 14,667 in stock; the sellers' links on this page open their listings.

What can replace the MCP9700A-E/TT?

Parts like it in the library: the TMP235A4DBZ by Texas Instruments, the TC1047AVNBTR by Microchip Technology, the LM50CIM3X by Texas Instruments and the LM60CIM3X/NOPB by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP9700A-E/TT?

3 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.