Skip to the content
123

MCP9700-E/TT

Microchip TechnologyExtended

-40℃~+125℃ 2.3V~5.5V ±2℃ SOT-23 Temperature Sensors ROHS

Part id
microchip/MCP9700-E/TT
Category
Temperature Sensors
Package
SOT-23
Pins
3
In stock
2,975 at JLCPCB (C42288)
Used on
7 open-source boards

Overview

The MCP9700-E/TT is a temperature Sensor made by Microchip Technology in a SOT-23 package with 3 pins. -40℃~+125℃ 2.3V~5.5V ±2℃ SOT-23 Temperature Sensors ROHS.

PCBKit's library has its KiCad symbol (dk_Temperature-Sensors-Analog-and-Digital-Output:MCP9700T-E_TT, from Digikey) and its footprint (Package_TO_SOT_SMD:SOT-23, from KiCad's library), ready for a KiCad board. 2,975 are in stock at JLCPCB (part C42288). 7 open-source boards in 7 repositories on GitHub use it.

Symbol

1GND2VOUT3VDD
dk_Temperature-Sensors-Analog-and-Digital-Output:MCP9700T-E_TTFrom Digikey

Footprint

123
Package_TO_SOT_SMD:SOT-23From KiCad's library

Pinout

3
The pins of the MCP9700-E/TT
PinNameType
1GNDPower in
2VOUTOutput
3VDDPower in

Open-source boards using it

7
  • 2 layers65 × 56 mmRadioberry preamp, the printed circuit board in 3D

    Radioberry preamp

    OE9SAU/SAUBerry9

    SDR TRX from Radioberry

    142 parts4
  • 2 layers87 × 33 mmBatmon, the printed circuit board in 3D

    Batmon

    pjaos/batmon

    A device to assist in extending the life of EBike batteries.

    58 parts1MIT
  • 2 layers100 × 50 mmEsp12e devboard, the printed circuit board in 3D

    Esp12e devboard

    EspIt/Hardware

    The EspIt PCB and Schematic

    117 parts
  • 4 layers192.5 × 80 mmPlugInDC Load, the printed circuit board in 3D

    PlugInDC Load

    janni0609/DC-Load

    A programmable DC electronic load built on the Raspberry Pi Pico 2 (RP2350). It sinks a user-defined current from a DC source under test and measures voltage, current, power, capacity, and energy in real time on a…

    525 parts
  • 2 layers76.2 × 31.8 mmFanctl, the printed circuit board in 3D

    Fanctl

    JeremyGrosser/fanctl

    PID controlled PC fan

    28 partsBSD-3-Clause
  • 2 layers36 × 96.5 mmTemper, the printed circuit board in 3D

    Temper

    pjaos/temper

    The hardware and software to monitor temperature and humidity via 4 sensors.

    60 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP9700-E/TT?

Yes. The symbol is dk_Temperature-Sensors-Analog-and-Digital-Output:MCP9700T-E_TT and the footprint Package_TO_SOT_SMD:SOT-23, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP9700-E/TT?

SOT-23, with 3 pins. Its footprint is drawn on this page.

Where is the MCP9700-E/TT datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP9700-E/TT?

JLCPCB lists it as part C42288, with 2,975 in stock; the sellers' links on this page open their listings.

What can replace the MCP9700-E/TT?

Parts like it in the library: the MCP9700A-E/TT by Microchip Technology, the TMP235A4DBZ by Texas Instruments, the TC1047AVNBTR by Microchip Technology and the LM50CIM3X by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP9700-E/TT?

7 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.