Skip to the content
12345678

MCP6S22-I/P

Microchip TechnologyExtended

-40℃~+85℃ 12MHz 1V/V~32V/V 1mA 1mA 1pA 2 2.5V~5.5V 275uV 30mA 4V/us 4uV/℃ Digital interface gain、Enable/shutdown function、Power-on reset / default gain PGA Rail-to-Rail Input, Rail-to-Rail Output Single-Ended DIP-8 Programmable / Variable Gain Amplifiers (PGA/VGA) ROHS

Part id
microchip/MCP6S22-I/P
Category
Operational Amplifier
Package
DIP-8
Pins
8
In stock
4 at JLCPCB (C185545)
Used on
3 open-source boards

Overview

The MCP6S22-I/P is an operational Amplifier made by Microchip Technology in a DIP-8 package with 8 pins. -40℃~+85℃ 12MHz 1V/V~32V/V 1mA 1mA 1pA 2 2.5V~5.5V 275uV 30mA 4V/us 4uV/℃ Digital interface gain、Enable/shutdown function、Power-on reset / default gain PGA Rail-to-Rail Input, Rail-to-Rail Output Single-Ended DIP-8 Programmable / Variable Gain Amplifiers (PGA/VGA) ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MCP6S22-I_P, from EasyEDA) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 4 are in stock at JLCPCB (part C185545). 3 open-source boards in 2 repositories on GitHub use it.

Symbol

1VOUT2CH03CH14VSS5CS#6SI7SCK8VDD
EasyEDA_Cloud:MCP6S22-I_PFrom EasyEDA

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

8
The pins of the MCP6S22-I/P
PinNameType
1VOUTUnspecified
2CH0Unspecified
3CH1Unspecified
4VSSUnspecified
5CS#Unspecified
6SIUnspecified
7SCKUnspecified
8VDDUnspecified

Open-source boards using it

3
  • 2 layersNoname.kicad pcb version2, the printed circuit board in 3D

    Noname.kicad pcb version2

    grtyvr/DPSPicoScope-Clone

    A clone of the great project DPIPicoscope based on AJ Scope

    48 parts
  • 2 layers107.9 × 49.5 mmDPSPICoscope, the printed circuit board in 3D

    DPSPICoscope

    grtyvr/DPSPicoScope-Clone

    A clone of the great project DPIPicoscope based on AJ Scope

    45 parts
  • 2 layers100 × 100 mmSoilchord, the printed circuit board in 3D

    Soilchord

    jayis1/hardware-design-lab

    Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack

    6 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP6S22-I/P?

Yes. The symbol is EasyEDA_Cloud:MCP6S22-I_P and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP6S22-I/P?

DIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the MCP6S22-I/P datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP6S22-I/P?

JLCPCB lists it as part C185545, with 4 in stock; the sellers' links on this page open their listings.

What can replace the MCP6S22-I/P?

Parts like it in the library: the LM358N by HGSEMI, the LM358N/NOPB by Texas Instruments, the NE5532P by Texas Instruments and the LM358N(XBLW) by XBLW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP6S22-I/P?

3 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.