4 layers27.9 × 108 mm
Overview
The MCP6004-I/ST is an operational Amplifier made by Microchip Technology in a TSSOP-14 package with 14 pins. -40℃~+125℃ 1.8V~5.5V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4 4.5mV 600V/ms 76dB Rail-to-Rail Input, Rail-to-Rail Output TSSOP-14 Operational Amplifier ROHS.
PCBKit's library has its KiCad symbol (Amplifier_Operational:MCP6004, from KiCad's library) and its footprint (Package_SO:TSSOP-14_4.4x5mm_P0.65mm, from KiCad's library), ready for a KiCad board. 5,497 are in stock at JLCPCB (part C50282). 3 open-source boards in 3 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
9- Supply, least
- 1.8 V · VDD, recommended operating min · p. 3
- Supply, most
- 6 V · VDD, recommended operating max · p. 3
- Supply, absolute maximum
- 7 V · VDD – VSS, absolute max · p. 3
- Works from
- -40 °C · industrial ambient temperature min · p. 4
- Works up to
- 85 °C · industrial ambient temperature max · p. 4
- Junction, hottest
- 150 °C · junction temperature absolute max · p. 3
- Takes working
- 400 µA · sum of four amplifiers' typical quiescent currents, IO = 0, VDD = 5.5V, VCM = 5V · p. 3
- A pin gives at most
- 30 mA · output pin source or sink current absolute max · p. 3
- Junction to air (14-Lead TSSOP)
- 100 K/W · junction to ambient thermal resistance typical · p. 4
What it is and has
4- Gain Bandwidth Product
- 1 MHz typical · p. 1
- Input/output
- Rail-to-rail · p. 1
- Phase Margin
- 90° typical · p. 1
- Package options
- 14-Lead PDIP, SOIC, TSSOP · p. 1
Around it
2- cap 0.01 µF to 0.1 µF
- between VDD and VSS; Local supply bypass capacitor within 2 mm for good high-frequency performance. · p. 14
- cap 1 µF or larger
- between VDD and VSS; Bulk supply capacitor within 100 mm; may be shared with nearby analog parts. · p. 14
Specifications
29| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| VDD – VSS | max 7 V | 3 | |
| Current at Analog Input Pins (VIN+, VIN-) | min -2 · max 2 mA | 3 | |
| Current at Output and Supply Pins | min -30 · max 30 mA | 3 | |
| Storage Temperature | min -65 · max 150 °C | 3 | |
| Maximum Junction Temperature (TJ) TJ | max 150 °C | 3 | |
| ESD Protection On All Pins (HBM; MM) | HBM | min 4 kV | 3 |
| ESD Protection On All Pins (HBM; MM) | MM | min 200 V | 3 |
| Input Offset Voltage VOS | VCM = VSS (Note 1) | min -4.5 · max 4.5 mV | 3 |
| Input Offset Drift with Temperature VOS/TA | TA = -40°C to +125°C, VCM = VSS | typ 2 uV/°C | 3 |
| Power Supply Rejection Ratio PSRR | VCM = VSS | typ 86 dB | 3 |
| Input Bias Current: IB | TA = +25°C; typical magnitude ±1.0 pA | typ 1 pA | 3 |
| Industrial Temperature IB | Input Bias Current; TA = +85°C | typ 19 pA | 3 |
| Input Offset Current IOS | Typical magnitude ±1.0 pA | typ 1 pA | 3 |
| Common-Mode Rejection Ratio CMRR | VCM = -0.3V to 5.3V, VDD = 5V | min 60 · typ 76 dB | 3 |
| DC Open-Loop Gain (Large Signal) AOL | VOUT = 0.3V to VDD – 0.3V, VCM = VSS | min 88 · typ 112 dB | 3 |
| Output Short-Circuit Current ISC | VDD = 1.8V; typical magnitude ±6 mA | typ 6 mA | 3 |
| Output Short-Circuit Current ISC | VDD = 5.5V; typical magnitude ±23 mA | typ 23 mA | 3 |
| Supply Voltage VDD | Note 2: operation at 6.0V screened for date codes November 2007 and later; other minimum and maximum specifications measured at 1.8V and 5.5V | min 1.8 · max 6 V | 3 |
| Quiescent Current per Amplifier IQ | IO = 0, VDD = 5.5V, VCM = 5V | min 50 · typ 100 · max 170 uA | 3 |
| Gain Bandwidth Product GBWP | typ 1 MHz | 4 | |
| Phase Margin PM | G = +1 V/V | typ 90 ° | 4 |
| Slew Rate SR | typ 0.6 V/us | 4 | |
| Input Noise Voltage Eni | f = 0.1 Hz to 10 Hz | typ 6.1 uVp-p | 4 |
| Input Noise Voltage Density eni | f = 1 kHz | typ 28 nV/Hz | 4 |
| Input Noise Current Density ini | f = 1 kHz | typ 0.6 fA/Hz | 4 |
| Industrial Temperature Range TA | Industrial temperature grade | min -40 · max 85 °C | 4 |
| Operating Temperature Range TA | Note 1: industrial temperature devices operate over this extended range with reduced performance; TJ must not exceed +150°C | min -40 · max 125 °C | 4 |
| Storage Temperature Range TA | min -65 · max 150 °C | 4 | |
| Thermal Resistance, 14-Lead TSSOP JA | 14-Lead TSSOP | typ 100 °C/W | 4 |
Pins, by the datasheet
14- 1 VOUTA
- Amplifier A output. · p. 1
- 2 VINA-
- Amplifier A inverting input. · p. 1
- 3 VINA+
- Amplifier A noninverting input. · p. 1
- 4 VDD
- Positive power supply. · p. 1
- 5 VINB+
- Amplifier B noninverting input. · p. 1
- 6 VINB-
- Amplifier B inverting input. · p. 1
- 7 VOUTB
- Amplifier B output. · p. 1
- 8 VOUTC
- Amplifier C output. · p. 1
- 9 VINC-
- Amplifier C inverting input. · p. 1
- 10 VINC+
- Amplifier C noninverting input. · p. 1
- 11 VSS
- Negative power supply; ground for single supply operation. · p. 1
- 12 VIND+
- Amplifier D noninverting input. · p. 1
- 13 VIND-
- Amplifier D inverting input. · p. 1
- 14 VOUTD
- Amplifier D output. · p. 1
Parameters
20- Common Mode Rejection Ratio(CMRR)
- 76dB
- Current - Supply
- 400uA
- Features
- ESD protection
- Gain Bandwidth Product
- 1MHz
- Ib - Input Bias Current
- 1pA
- Input Offset Current(Ios)
- 1pA
- Input Offset Voltage Drift(Vos TC)
- 2uV/℃
- Input Voltage Noise Density
- 28nV/√Hz@1kHz
- Junction Temperature(Max)
- 150℃
- Number of Channels
- 4
- Operating Temperature
- -40℃~+85℃
- Output Current
- 23mA
- Output Current per Pin(Max)
- 30mA
- Quiescent Current
- 100uA
- Rail to Rail
- Rail-to-Rail Input, Rail-to-Rail Output
- Single supply
- 1.8V~6V
- Slew Rate
- 600V/ms
- Thermal Resistance(Junction to Ambient)
- 100℃/W
- Voltage - Supply(Absolute Max)
- 7V
- Vos - Input Offset Voltage
- 4.5mV
Order codes
2- MCP6004-I/STLCSC C185811
- MCP6004T-I/STLCSC C50282
Pinout
14| Pin | Name | Type |
|---|---|---|
| 1 | — | Output |
| 2 | - | Input |
| 3 | + | Input |
| 4 | V+ | Power in |
| 5 | + | Input |
| 6 | - | Input |
| 7 | — | Output |
| 8 | — | Output |
| 9 | - | Input |
| 10 | + | Input |
| 11 | V- | Power in |
| 12 | + | Input |
| 13 | - | Input |
| 14 | — | Output |
Open-source boards using it
All 3- 4 layers38.1 × 100 mm
- 4 layers50.8 × 22.9 mm
Eps tap wing
ThatguyCplus/throttleECU
STM32F411CE Throttle ECU — PID position control with AS5048A encoder, H-bridge motor, safety module
77 parts1
Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/microchip/MCP6004-I/ST" title="MCP6004-I/ST in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/microchip/MCP6004-I/ST.jpg" alt="MCP6004-I/ST" width="1200" height="900">[](https://pcbkit.io/parts/microchip/MCP6004-I/ST)Questions
Is there a KiCad symbol and footprint for the MCP6004-I/ST?
Yes. The symbol is Amplifier_Operational:MCP6004 and the footprint Package_SO:TSSOP-14_4.4x5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MCP6004-I/ST?
TSSOP-14, with 14 pins. Its footprint is drawn on this page.
Where is the MCP6004-I/ST datasheet?
Microchip Technology publishes it: the Datasheet link on this page opens it.
Where can I order the MCP6004-I/ST?
JLCPCB lists it as part C50282, with 5,497 in stock; the sellers' links on this page open their listings.
What can replace the MCP6004-I/ST?
Parts like it in the library: the LM324PW by Texas Instruments, the TLV9064IPW by Texas Instruments, the MC33074ADTB by onsemi and the ADA4692-4ARUZ(UMW) by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the MCP6004-I/ST?
3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.
Parts like it
8
LM324PW
TSSOP-14-1.5V~16V -40℃~+125℃ 1.2MHz 1.2mA 20nA 35nV/√Hz@1kHz 3V~32V 3mV 4 500V/ms 50nA 60mA 80dB EMI filtering/RF suppression TSSOP-14 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierTLV9064IPW
TSSOP-14-40℃~+125℃ 0.05pA 1.6mV 1.8V~5.5V 10MHz 16nV/√Hz@1kHz 4 50mA 530nV/℃ 538uA 6.5V/us 81pA 87dB Enable/shutdown function、ESD protection、EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output TSSOP-14 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierMC33074ADTB
TSSOP-14-40℃~+85℃ 1.9mA 100nA 10uV/℃ 13V/us 30mA 32nV/√Hz@1kHz 3V~44V 4.5MHz 500uV 6nA 97dB Four channels Short-Circuit Protection、High capacitive load driving、ESD protection TSSOP-14 Operational Amplifier ROHSonsemiOperational AmplifierADA4692-4ARUZ(UMW)
TSSOP-14-2.5V~-1.35V、1.35V~2.5V -40℃~+125℃ 0.5pA 1.3V/us 16nV/√Hz@1kHz 180uA 1pA 1uV/℃ 2.7V~5V 3.6MHz 4 500uV 55mA 98dB Rail-to-rail output TSSOP-14 Operational Amplifier ROHSUMWOperational AmplifierMCP6004T-I/ST(UMW)
TSSOP-14-40℃~+85℃ 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4 4.5mV 600V/ms 76dB Rail-to-Rail Input, Rail-to-Rail Output TSSOP-14 Operational Amplifier ROHSUMWOperational AmplifierTSV6394AIPT(UMW)
TSSOP-14-40℃~+125℃ 1.1V/us 1.5V~5.5V 10pA 1pA 2.4MHz 2uV/℃ 4 60nV/√Hz@1kHz 60uA 72mA 800uV 80dB Rail-to-Rail Input, Rail-to-Rail Output TSSOP-14 Operational Amplifier ROHSUMWOperational AmplifierOPA4991IPW
TSSOP-14-20V~-1.35V、1.35V~20V -40℃~+125℃ 10.8nV/√Hz@1kHz 10pA 10pA 125uV 130dB 2.7V~40V 21V/us 300nV/℃ 4 4.5MHz 560uA 75mA Enable/shutdown function、EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output TSSOP-14 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierTLV9004IPW
TSSOP-14-2.75V~2.75V -40℃~+125℃ 1.8V~5.5V 1MHz 27nV/√Hz@1kHz 2V/us 2pA 4 400uV 40mA 5pA 600nV/℃ 60uA 86dB EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output TSSOP-14 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier