Skip to the content
12345

MCP6001-I/OT

Microchip TechnologyExtended

-40℃~+85℃ 1 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Operational Amplifier ROHS

Part id
microchip/MCP6001-I/OT
Category
Operational Amplifier
Package
SOT-23-5
Pins
5
In stock
51,387 at JLCPCB (C116490)

Overview

The MCP6001-I/OT is an operational Amplifier made by Microchip Technology in a SOT-23-5 package with 5 pins. -40℃~+85℃ 1 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (dk_Linear-Amplifiers-Instrumentation-OP-Amps-Buffer-Amps:MCP6001T-I_OT, from Digikey) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 51,387 are in stock at JLCPCB (part C116490).

Symbol

12VSS345VDD
dk_Linear-Amplifiers-Instrumentation-OP-Amps-Buffer-Amps:MCP6001T-I_OTFrom Digikey

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

From the datasheet

9
Supply, least
1.8 V · VDD, recommended operating minimum · p. 3
Supply, most
6 V · VDD, recommended operating maximum · p. 3
Supply, absolute maximum
7 V · VDD – VSS, absolute maximum · p. 3
Works from
-40 °C · TA, industrial minimum · p. 4
Works up to
85 °C · TA, industrial maximum · p. 4
Junction, hottest
150 °C · TJ, absolute maximum · p. 3
Takes working
100 µA · IQ, typical per amplifier, IO = 0, VDD = 5.5V, VCM = 5V · p. 3
A pin gives at most
30 mA · Output and supply pins, absolute maximum magnitude · p. 3
Junction to air (5-Lead SOT-23)
256 K/W · Junction to ambient, typical · p. 4

What it is and has

3
Gain bandwidth product
1 MHz typical · p. 1
Input/output
Rail-to-rail · p. 1
Phase margin
90° typical · p. 1

Around it

2
cap 0.01 µF to 0.1 µF
between VDD and VSS; Local supply bypass capacitor within 2 mm. · p. 14
cap 1 µF or larger
between VDD and VSS; Bulk supply capacitor within 100 mm; may be shared with nearby analog parts. · p. 14

Specifications

24
ParameterConditionsAs printedPage
VDD – VSSmax 7 V3
Current at Analog Input Pins (VIN+, VIN-)min -2 · max 2 mA3
Current at Output and Supply Pinsmin -30 · max 30 mA3
Storage Temperaturemin -65 · max 150 °C3
Maximum Junction Temperature (TJ) TJmax 150 °C3
ESD Protection On All Pins (HBM; MM)HBMmin 4 kV3
ESD Protection On All Pins (HBM; MM)MMmin 200 V3
Input Offset Voltage VOSVCM = VSS (Note 1)min -4.5 · max 4.5 mV3
Power Supply Rejection Ratio PSRRVCM = VSStyp 86 dB3
Industrial Temperature IBInput Bias Current; TA = +85°Ctyp 19 pA3
Common-Mode Rejection Ratio CMRRVCM = -0.3V to 5.3V, VDD = 5Vmin 60 · typ 76 dB3
DC Open-Loop Gain (Large Signal) AOLVOUT = 0.3V to VDD – 0.3V, VCM = VSSmin 88 · typ 112 dB3
Supply Voltage VDDNote 2min 1.8 · max 6 V3
Quiescent Current per Amplifier IQIO = 0, VDD = 5.5V, VCM = 5Vmin 50 · typ 100 · max 170 uA3
Gain Bandwidth Product GBWPtyp 1 MHz4
Phase Margin PMG = +1 V/Vtyp 90 °4
Slew Rate SRtyp 0.6 V/us4
Input Noise Voltage Enif = 0.1 Hz to 10 Hztyp 6.1 uVp-p4
Input Noise Voltage Density enif = 1 kHztyp 28 nV/Hz4
Input Noise Current Density inif = 1 kHztyp 0.6 fA/Hz4
Industrial Temperature Range TAIndustrial grademin -40 · max 85 °C4
Operating Temperature Range TANote 1: industrial devices operate over this range with reduced performance; TJ must not exceed +150°Cmin -40 · max 125 °C4
Storage Temperature Range TAmin -65 · max 150 °C4
Thermal Resistance, 5-Lead SOT-23 JA5-Lead SOT-23typ 256 °C/W4

Pins, by the datasheet

5
1 VOUT
Amplifier output. · p. 1
2 VSS
Negative supply. · p. 1
3 VIN+
Noninverting input. · p. 1
4 VIN-
Inverting input. · p. 1
5 VDD
Positive supply. · p. 1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP6001-I/OT?

Yes. The symbol is dk_Linear-Amplifiers-Instrumentation-OP-Amps-Buffer-Amps:MCP6001T-I_OT and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP6001-I/OT?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the MCP6001-I/OT datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP6001-I/OT?

JLCPCB lists it as part C116490, with 51,387 in stock; the sellers' links on this page open their listings.

What can replace the MCP6001-I/OT?

Parts like it in the library: the LMV321IDBVR by UMW, the LM321MF by UMW, the TLV9061IDBV by Texas Instruments and the LM321-TR by Gainsil. Check their datasheets: a part that fits the footprint may still differ in its ratings.