Skip to the content
12345678

MCP4822-E/SN

Microchip TechnologyExtended

-40℃~+125℃ 12 12LSB 2 2.7V~5.5V 4.5us 415uA 50ppm/℃ Built-in Built-in SPI Voltage Buffer SOIC-8 Digital to Analog Converters (DAC) ROHS

Part id
microchip/MCP4822-E/SN
Category
Digital To Analog Converters (DAC)
Package
SOIC-8
Pins
8
In stock
6,599 at JLCPCB (C16040)
Used on
5 open-source boards

Overview

The MCP4822-E/SN is a digital To Analog Converter made by Microchip Technology in a SOIC-8 package with 8 pins. -40℃~+125℃ 12 12LSB 2 2.7V~5.5V 4.5us 415uA 50ppm/℃ Built-in Built-in SPI Voltage Buffer SOIC-8 Digital to Analog Converters (DAC) ROHS.

PCBKit's library has its KiCad symbol (Analog_DAC:MCP4822, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 6,599 are in stock at JLCPCB (part C16040). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

1Vdd2CS3SCK4SDI5LDAC6VB7Vss8VA
Analog_DAC:MCP4822From KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

From the datasheet

10
Supply, least
2.7 V · VDD, recommended operating min · p. 3
Supply, most
5.5 V · VDD, recommended operating max · p. 3
Supply, absolute maximum
6.5 V · VDD, absolute max · p. 3
Works from
-40 °C · Operating ambient temperature min · p. 7
Works up to
125 °C · Operating ambient temperature max · p. 7
Junction, hottest
150 °C · Junction temperature absolute max · p. 3
Takes working
415 µA · VDD input current typical, outputs unloaded, code 0x000h · p. 3
Takes asleep
3.3 µA · Software shutdown current typical · p. 3
A pin gives at most
25 mA · Output pin current absolute max, magnitude · p. 3
Junction to air (8L-SOIC)
150 K/W · Junction-to-ambient thermal resistance typical · p. 7

What it is and has

6
DAC
Dual 12-bit voltage output · p. 1
Output
Rail-to-rail · p. 1
SPI
20 MHz clock support · p. 1
Output gain
Selectable unity or 2x · p. 1
Internal voltage reference
2.048V · p. 1
Settling time
4.5 µs · p. 1

Around it

2
cap 0.1 µF
between VDD and VSS; Ceramic bypass capacitor in parallel with 10 uF tantalum; place as close as possible to VDD, within 4 mm. · p. 25
cap 10 µF
between VDD and VSS; Tantalum bypass capacitor in parallel with 0.1 uF ceramic; place as close as possible to VDD, within 4 mm. · p. 25

Specifications

73
ParameterConditionsAs printedPage
VDD VDDmax 6.5 V3
Current at Input Pinsmin -2 · max 2 mA3
Current at Supply Pinsmin -50 · max 50 mA3
Current at Output Pinsmin -25 · max 25 mA3
Storage temperaturemin -65 · max 150 °C3
Ambient temp. with power appliedmin -55 · max 125 °C3
ESD protection on all pinsHBMmin 4 kV3
ESD protection on all pinsMMmin 400 V3
Maximum Junction Temperature TJmax 150 °C3
Input Voltage VDDmin 2.7 · max 5.5 V3
Input Current IDDVDD = 5V, TA = -40 to +85°C; typical at +25°C. All digital inputs grounded, all analog outputs unloaded; Code = 0x000h.typ 415 · max 750 uA3
Software Shutdown Current ISHDN_SWVDD = 5V, TA = -40 to +85°C; typical at +25°C.typ 3.3 · max 6 uA3
Power-on Reset Threshold VPORtyp 2 V3
Resolution nMCP4822min 12 Bits3
INL Error INLMCP4822min -12 · max 12 LSb3
DNL DNLMCP4822; guaranteed monotonic by design over all codes.min -0.75 · max 0.75 LSb3
Offset Error VOSCode = 0x000hmin -1 · max 1 % of FSR3
Offset Error Temperature Coefficient VOS/°C-45°C to +25°Ctyp 0.16 ppm/°C3
Offset Error Temperature Coefficient VOS/°C+25°C to +85°Ctyp -0.44 ppm/°C3
Gain Error gECode = 0xFFFh, not including offset errormin -2 · typ -0.1 · max 2 % of FSR3
Gain Error Temperature Coefficient G/°Ctyp -3 ppm/°C3
Internal Reference Voltage VREFVOUTA when G = 1x and Code = 0xFFFhmin 2.008 · typ 2.048 · max 2.088 V4
Temperature Coefficient (Note 2) VREF/°C-40°C to 0°C; ensured by design, not 100% tested.typ 125 · max 325 ppm/°C4
Temperature Coefficient (Note 2) VREF/°C-40°C to 0°C; ensured by design, not 100% tested.typ 0.25 · max 0.65 LSb/°C4
Temperature Coefficient (Note 2) VREF/°C0°C to +85°C; ensured by design, not 100% tested.typ 45 · max 160 ppm/°C4
Temperature Coefficient (Note 2) VREF/°C0°C to +85°C; ensured by design, not 100% tested.typ 0.09 · max 0.32 LSb/°C4
Output Noise (VREF Noise) ENREF0.1-10 Hz; Code = 0xFFFh, G = 1xtyp 290 uVp-p4
Output Noise Density eNREF1 kHz; Code = 0xFFFh, G = 1xtyp 1.2 uV/Hz4
Output Noise Density eNREF10 kHz; Code = 0xFFFh, G = 1xtyp 1 uV/Hz4
1/f Corner Frequency fCORNERtyp 400 Hz4
Phase Margin PMCL= 400 pF, RL = typ 66 Degree (°)4
Slew Rate SRtyp 0.55 V/us4
Short Circuit Current ISCtyp 15 · max 24 mA4
Settling Time tSETTLINGWithin 1/2 LSb of final value from 1/4 to 3/4 full-scale rangetyp 4.5 us4
Major Code Transition Glitch1 LSb change around major carry (0111 1111 to 1000 0000); ensured by design, not 100% tested.typ 45 nV-s4
Input Voltage VDDTypical values at +125°C by characterization or simulation.min 2.7 · max 5.5 V5
Input Current IDDVDD = 5V; typical at +125°C by characterization or simulation. All digital inputs grounded, all analog outputs unloaded; Code = 0x000h.typ 440 uA5
Software Shutdown Current ISHDN_SWTypical at +125°C by characterization or simulation.typ 5 uA5
Power-On Reset threshold VPORTypical at +125°C by characterization or simulation.typ 1.85 V5
Offset Error Temperature Coefficient VOS/°C+25°C to +125°Ctyp -5 ppm/°C5
Gain Error gECode = 0xFFFh, not including offset error; typical at +125°C by characterization or simulation.typ -0.1 % of FSR5
Gain Error Temperature Coefficient G/°CTypical at +125°C by characterization or simulation.typ -3 ppm/°C5
Internal Reference Voltage VREFVOUTA when G = 1x and Code = 0xFFFh; typical at +125°C by characterization or simulation.typ 2.048 V5
Temperature Coefficient (Note 2) VREF/°C-40°C to 0°C; ensured by design, not 100% tested.typ 125 ppm/°C5
Temperature Coefficient (Note 2) VREF/°C-40°C to 0°C; ensured by design, not 100% tested.typ 0.25 LSb/°C5
Temperature Coefficient (Note 2) VREF/°C0°C to +85°C; ensured by design, not 100% tested.typ 45 ppm/°C5
Temperature Coefficient (Note 2) VREF/°C0°C to +85°C; ensured by design, not 100% tested.typ 0.09 LSb/°C5
Output Noise (VREF Noise) ENREF0.1 – 10 Hz; Code = 0xFFFh, G = 1x; typical at +125°C by characterization or simulation.typ 290 uVp-p5
Output Noise Density eNREF1 kHz; Code = 0xFFFh, G = 1x; typical at +125°C by characterization or simulation.typ 1.2 uV/Hz5
Output Noise Density eNREF10 kHz; Code = 0xFFFh, G = 1x; typical at +125°C by characterization or simulation.typ 1 uV/Hz5
1/f Corner Frequency fCORNERTypical at +125°C by characterization or simulation.typ 400 Hz5
Phase Margin PMCL= 400 pF, RL = ; typical at +125°C by characterization or simulation.typ 66 Degree (°)6
Slew Rate SRTypical at +125°C by characterization or simulation.typ 0.55 V/us6
Short Circuit Current ISCTypical at +125°C by characterization or simulation.typ 17 mA6
Settling Time tSETTLINGWithin 1/2 LSb of final value from 1/4 to 3/4 full-scale range; typical at +125°C by characterization or simulation.typ 4.5 us6
Major Code Transition Glitch1 LSb change around major carry (0111 1111 to 1000 0000); typical at +125°C by characterization or simulation; ensured by design, not 100% tested.typ 45 nV-s6
Input Leakage Current ILEAKAGELDAC = CS = SDI = SCK = VDD or VSSmin -1 · max 1 A6
Digital Pin Capacitance (All inputs/outputs) CIN, COUTVDD = 5.0V, TA = +25°C, fCLK = 1 MHz; ensured by design and not 100% tested.typ 10 pF6
Clock Frequency FCLKTA = +25°C; ensured by design and not 100% tested.max 20 MHz6
Clock High Time tHIEnsured by design and not 100% tested.min 15 ns6
Clock Low Time tLOEnsured by design and not 100% tested.min 15 ns6
CS Fall to First Rising CLK Edge tCSSRApplies only when CS falls with CLK high; ensured by design and not 100% tested.min 40 ns6
Data Input Setup Time tSUEnsured by design and not 100% tested.min 15 ns6
Data Input Hold Time tHDEnsured by design and not 100% tested.min 10 ns6
SCK Rise to CS Rise Hold Time tCHSEnsured by design and not 100% tested.min 15 ns6
CS High Time tCSHEnsured by design and not 100% tested.min 15 ns7
LDAC Pulse Width tLDEnsured by design and not 100% tested.min 100 ns7
LDAC Setup Time tLSEnsured by design and not 100% tested.min 40 ns7
SCK Idle Time before CS Fall tIDLEEnsured by design and not 100% tested.min 40 ns7
Specified Temperature Range TAVDD = +2.7V to +5.5V, VSS = GND.min -40 · max 125 °C7
Operating Temperature Range TAVDD = +2.7V to +5.5V, VSS = GND. Reduced performance over the extended temperature range; TJ must not exceed +150°C.min -40 · max 125 °C7
Storage Temperature Range TAmin -65 · max 150 °C7
Thermal Resistance, 8L-SOIC JA8L-SOICtyp 150 °C/W7

Pins, by the datasheet

8
1 VDD
Supply voltage input, 2.7V to 5.5V. · p. 15
2 CS
Active-low chip select input enables serial clock and data functions. · p. 15
3 SCK
SPI compatible serial clock input. · p. 15
4 SDI
SPI compatible serial data input. · p. 15
5 LDAC
Transfers input registers to output registers; low updates both DAC outputs simultaneously. May be tied to VSS for updates at the rising edge of CS. · p. 15
6 VOUTB
DACB output with its own output amplifier. · p. 15
7 VSS
Ground reference and current return; connect to a ground plane through a low-impedance connection. · p. 15
8 VOUTA
DACA output with its own output amplifier. · p. 15

Open-source boards using it

5
  • 2 layers20 × 110 mmComposerMIDICV, the printed circuit board in 3D

    ComposerMIDICV

    CopycatMusic/ComposerMIDICV

    4 HP Eurorack USB/TRS MIDI-to-CV module: RP2354A firmware, KiCad hardware and v1.0 manufacturing files.

    87 parts2AGPL-3.0
  • 4 layers30 × 100 mmCurly memory kicad, the printed circuit board in 3D

    Curly memory kicad

    rallen-device/curly-memory

    Open source hardware for eurorack using ESP32

    84 parts2MIT
  • 4 layers85.9 × 85.9 mmPd1180-epr r0.3, the printed circuit board in 3D

    Pd1180-epr r0.3

    techmannih/pd1180-epr

    PD1180-EPR — NEMA 34 Smart Motor-Mounted Stepper Controller with USB-C PD 3.1 EPR

    277 parts
  • 2 layers60.3 × 106.5 mmTiNRS Wobbler2, the printed circuit board in 3D

    TiNRS Wobbler2

    ThisIsNotRocketScience/Eurorack-Modules

    This is not Rocket Science presents: Eurorack modular synthesizer modules!

    181 parts87MIT
  • 2 layers100 × 100 mmPID Board SMT, the printed circuit board in 3D

    PID Board SMT

    AaronDoubert/quadcopter-pid-boards

    Analog PID flight controller for a 5" quadcopter: roll, pitch and yaw loops built from op-amps and trimpots, fed by an MPU-6050 through a small ATtiny/DAC "shim", driving a 4in1 ESC. Designed in KiCad 10.

    224 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP4822-E/SN?

Yes. The symbol is Analog_DAC:MCP4822 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP4822-E/SN?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the MCP4822-E/SN datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP4822-E/SN?

JLCPCB lists it as part C16040, with 6,599 in stock; the sellers' links on this page open their listings.

What can replace the MCP4822-E/SN?

Parts like it in the library: the PT8211-S by PTC, the DAC8830ID by Texas Instruments, the MCP4821-E/SN by Microchip Technology and the MCP4901-E/SN by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP4822-E/SN?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.