
BTMessBox
hbend63/Mesknecht23
6-Channel AD-Converter Adapter for 4-20mA or 0-10V Measurement-Units
Microchip TechnologyExtended
-40℃~+85℃ 100kHz 12 1LSB 1MHz~2MHz 2.7V~5.5V 500nA 8 External SAR SPI Yes SOIC-16 Analog to Digital Converters (ADC) ROHS
The MCP3208-BI/SL is an analog To Digital Converter made by Microchip Technology in a SOIC-16 package with 16 pins. -40℃~+85℃ 100kHz 12 1LSB 1MHz~2MHz 2.7V~5.5V 500nA 8 External SAR SPI Yes SOIC-16 Analog to Digital Converters (ADC) ROHS.
PCBKit's library has its KiCad symbol (Analog_ADC:MCP3208, from KiCad's library) and its footprint (Package_SO:SOIC-16_3.9x9.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 112 are in stock at JLCPCB (part C2979740). 1 open-source board in 1 repository on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| VDD VDD | max 7 V | 2 | |
| All inputs and outputs w.r.t. VSS | Upper limit VDD +0.6V | min -0.6 V | 2 |
| Storage temperature | min -65 · max 150 °C | 2 | |
| Ambient temp. with power applied | min -65 · max 125 °C | 2 | |
| Soldering temperature of leads | 10 seconds | max 300 °C | 2 |
| ESD protection on all pins | Protection > 4 kV; strict lower bound | min 4 kV | 2 |
| Conversion Time tCONV | max 12 clock cycles | 2 | |
| Analog Input Sample Time tSAMPLE | typ 1.5 clock cycles | 2 | |
| Throughput Rate fSAMPLE | VDD = VREF = 5V | max 100 ksps | 2 |
| Throughput Rate fSAMPLE | VDD = VREF = 2.7V | max 50 ksps | 2 |
| Resolution | typ 12 bits | 2 | |
| Integral Nonlinearity INL | MCP3208-B; typical and maximum values are ± magnitudes | typ 0.75 · max 1 LSB | 2 |
| Differential Nonlinearity DNL | No missing codes over-temperature; typical and maximum values are ± magnitudes | typ 0.5 · max 1 LSB | 2 |
| Offset Error | Typical and maximum values are ± magnitudes | typ 1.25 · max 3 LSB | 2 |
| Gain Error | Typical and maximum values are ± magnitudes | typ 1.25 · max 5 LSB | 2 |
| Total Harmonic Distortion | VIN = 0.1V to 4.9V@1 kHz | typ -82 dB | 2 |
| Signal to Noise and Distortion (SINAD) | VIN = 0.1V to 4.9V@1 kHz | typ 72 dB | 2 |
| Spurious Free Dynamic Range | VIN = 0.1V to 4.9V@1 kHz | typ 86 dB | 2 |
| Voltage Range | Reference Input; upper limit VDD; Note 2 | min 0.25 V | 2 |
| Current Drain | Reference Input | typ 100 · max 150 uA | 2 |
| Current Drain | Reference Input; CS = VDD = 5V | typ 0.001 · max 3 uA | 2 |
| Leakage Current | Analog Inputs; maximum is ± magnitude | typ 0.001 · max 1 uA | 3 |
| Switch Resistance | See Figure 4-1 | typ 1000 Ω | 3 |
| Sample Capacitor | See Figure 4-1 | typ 20 pF | 3 |
| High Level Output Voltage VOH | IOH = -1 mA, VDD = 4.5V | min 4.1 V | 3 |
| Low Level Output Voltage VOL | IOL = 1 mA, VDD = 4.5V | max 0.4 V | 3 |
| Input Leakage Current ILI | VIN = VSS or VDD | min -10 · max 10 uA | 3 |
| Output Leakage Current ILO | VOUT = VSS or VDD | min -10 · max 10 uA | 3 |
| Pin Capacitance (All Inputs/Outputs) CIN,COUT | VDD = 5.0V; TA = 25°C, f = 1 MHz; Note 1 | max 10 pF | 3 |
| Clock Frequency fCLK | VDD = 5V; Note 3 | max 2 MHz | 3 |
| Clock Frequency fCLK | VDD = 2.7V; Note 3 | max 1 MHz | 3 |
| Clock High Time tHI | min 250 ns | 3 | |
| Clock Low Time tLO | min 250 ns | 3 | |
| CS Fall To First Rising CLK Edge tSUCS | min 100 ns | 3 | |
| Data Input Setup Time tSU | min 50 ns | 3 | |
| Data Input Hold Time tHD | min 50 ns | 3 | |
| CLK Fall To Output Data Valid tDO | See Figures 1-2 and 1-3 | max 200 ns | 3 |
| CLK Fall To Output Enable tEN | See Figures 1-2 and 1-3 | max 200 ns | 3 |
| CS Rise To Output Disable tDIS | See Figures 1-2 and 1-3 | max 100 ns | 3 |
| CS Disable Time tCSH | min 500 ns | 3 | |
| DOUT Rise Time tR | See Figures 1-2 and 1-3; Note 1 | max 100 ns | 3 |
| DOUT Fall Time tF | See Figures 1-2 and 1-3; Note 1 | max 100 ns | 3 |
| Operating Voltage VDD | min 2.7 · max 5.5 V | 3 | |
| Operating Current IDD | VDD=VREF = 5V, DOUT unloaded | typ 320 · max 400 uA | 3 |
| Operating Current IDD | VDD=VREF = 2.7V, DOUT unloaded | typ 225 uA | 3 |
| Standby Current IDDS | CS = VDD = 5.0V | typ 0.5 · max 2 uA | 3 |
| Specified Temperature Range TA | min -40 · max 125 °C | 4 | |
| Operating Temperature Range TA | min -40 · max 125 °C | 4 | |
| Storage Temperature Range TA | min -65 · max 150 °C | 4 | |
| Thermal Resistance, 16L-SOIC θJA | 16L-SOIC | typ 86.1 °C/W | 4 |

hbend63/Mesknecht23
6-Channel AD-Converter Adapter for 4-20mA or 0-10V Measurement-Units
Yes. The symbol is Analog_ADC:MCP3208 and the footprint Package_SO:SOIC-16_3.9x9.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
SOIC-16, with 16 pins. Its footprint is drawn on this page.
Microchip Technology publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C2979740, with 112 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the HX711 by Avia Semicon, the NAU7802SGI by Nuvoton Tech, the MCP3008-I/SL by Microchip Technology and the HX717 by Avia Semicon. Check their datasheets: a part that fits the footprint may still differ in its ratings.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.