
Curly memory kicad
rallen-device/curly-memory
Open source hardware for eurorack using ESP32
Microchip TechnologyExtended
-40℃~+85℃ 1.35MHz~3.6MHz 10 1LSB 2.7V~5.5V 200kHz 5nA 8 External Multiplexers SAR SPI Yes SOIC-16 Analog to Digital Converters (ADC) ROHS
The MCP3008-I/SL is an analog To Digital Converter made by Microchip Technology in a SOIC-16 package with 16 pins. -40℃~+85℃ 1.35MHz~3.6MHz 10 1LSB 2.7V~5.5V 200kHz 5nA 8 External Multiplexers SAR SPI Yes SOIC-16 Analog to Digital Converters (ADC) ROHS.
PCBKit's library has its KiCad symbol (Analog_ADC:MCP3008, from KiCad's library) and its footprint (Package_SO:SOIC-16_3.9x9.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 1,605 are in stock at JLCPCB (part C2651321). 6 open-source boards in 4 repositories on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| VDD VDD | max 7 V | 3 | |
| All Inputs and Outputs w.r.t. VSS | Upper bound VDD + 0.6V | min -0.6 V | 3 |
| Storage Temperature | min -65 · max 150 °C | 3 | |
| Ambient temperature with power applied | min -65 · max 150 °C | 3 | |
| Soldering temperature of leads | 10 seconds | max 300 °C | 3 |
| ESD Protection On All Pins (HBM) | HBM | min 4 kV | 3 |
| Conversion Time tCONV | max 10 clock cycles | 3 | |
| Analog Input Sample Time tSAMPLE | typ 1.5 clock cycles | 3 | |
| Throughput Rate fSAMPLE | VDD = VREF = 5V | max 200 ksps | 3 |
| Throughput Rate fSAMPLE | VDD = VREF = 2.7V | max 75 ksps | 3 |
| Resolution | typ 10 bits | 3 | |
| Integral Nonlinearity INL | Values printed as ±0.5 typical and ±1 maximum | typ 0.5 · max 1 LSB | 3 |
| Differential Nonlinearity DNL | No missing codes over temperature; values printed as ±0.25 typical and ±1 maximum | typ 0.25 · max 1 LSB | 3 |
| Offset Error | Maximum printed as ±1.5 | max 1.5 LSB | 3 |
| Gain Error | Maximum printed as ±1.0 | max 1 LSB | 3 |
| Total Harmonic Distortion | VIN = 0.1V to 4.9V@1 kHz | typ -76 dB | 3 |
| Signal-to-Noise and Distortion (SINAD) | VIN = 0.1V to 4.9V@1 kHz | typ 61 dB | 3 |
| Spurious Free Dynamic Range | VIN = 0.1V to 4.9V@1 kHz | typ 78 dB | 3 |
| Voltage Range | Reference Input; maximum VDD; Note 2 | min 0.25 V | 3 |
| Current Drain | Reference Input; VDD = VREF = 5V, 200 ksps | typ 100 · max 150 uA | 3 |
| Current Drain | Reference Input; CS = VDD = 5V | typ 0.001 · max 3 uA | 3 |
| Leakage Current | Analog Inputs; maximum printed as ±1 | typ 0.001 · max 1 uA | 4 |
| Switch Resistance | See Figure 4-1 | typ 1000 Ω | 4 |
| Sample Capacitor | See Figure 4-1 | typ 20 pF | 4 |
| High Level Output Voltage VOH | IOH = -1 mA, VDD = 4.5V | min 4.1 V | 4 |
| Low Level Output Voltage VOL | IOL = 1 mA, VDD = 4.5V | max 0.4 V | 4 |
| Input Leakage Current ILI | VIN = VSS or VDD | min -10 · max 10 uA | 4 |
| Output Leakage Current ILO | VOUT = VSS or VDD | min -10 · max 10 uA | 4 |
| Pin Capacitance (All Inputs/Outputs) CIN, COUT | VDD = 5.0V; TA = 25°C, f = 1 MHz; Note 1 | max 10 pF | 4 |
| Clock Frequency fCLK | VDD = 5V (Note 3) | max 3.6 MHz | 4 |
| Clock Frequency fCLK | VDD = 2.7V (Note 3) | max 1.35 MHz | 4 |
| Clock High Time tHI | min 125 ns | 4 | |
| Clock Low Time tLO | min 125 ns | 4 | |
| CS Fall To First Rising CLK Edge tSUCS | min 100 ns | 4 | |
| CS Fall To Falling CLK Edge tCSD | max 0 ns | 4 | |
| Data Input Setup Time tSU | min 50 ns | 4 | |
| Data Input Hold Time tHD | min 50 ns | 4 | |
| CLK Fall To Output Data Valid tDO | VDD = 5V, See Figure 1-2 | max 125 ns | 4 |
| CLK Fall To Output Data Valid tDO | VDD = 2.7V, See Figure 1-2 | max 200 ns | 4 |
| CLK Fall To Output Enable tEN | VDD = 5V, See Figure 1-2 | max 125 ns | 4 |
| CLK Fall To Output Enable tEN | VDD = 2.7V, See Figure 1-2 | max 200 ns | 4 |
| CS Rise To Output Disable tDIS | See Test Circuits, Figure 1-2 | max 100 ns | 4 |
| CS Disable Time tCSH | min 270 ns | 4 | |
| DOUT Rise Time tR | See Test Circuits, Figure 1-2; Note 1 | max 100 ns | 4 |
| DOUT Fall Time tF | See Test Circuits, Figure 1-2; Note 1 | max 100 ns | 4 |
| Operating Voltage VDD | min 2.7 · max 5.5 V | 5 | |
| Operating Current IDD | VDD = VREF = 5V, DOUT unloaded | typ 425 · max 550 uA | 5 |
| Operating Current IDD | VDD = VREF = 2.7V, DOUT unloaded | typ 225 uA | 5 |
| Standby Current IDDS | CS = VDD = 5.0V | typ 0.005 · max 2 uA | 5 |
| Specified Temperature Range TA | VDD = +2.7V to +5.5V, VSS = GND | min -40 · max 85 °C | 5 |
| Operating Temperature Range TA | VDD = +2.7V to +5.5V, VSS = GND | min -40 · max 85 °C | 5 |
| Storage Temperature Range TA | min -65 · max 150 °C | 5 | |
| Thermal Resistance, 16L-SOIC θJA | 16L-SOIC | typ 90 °C/W | 5 |

rallen-device/curly-memory
Open source hardware for eurorack using ESP32

danielwilczak101/EasyControls
Originally part of the NASA Asteroid flyer program has been repurposed by the EPPL to allow anyone interested in controls to go online and connect with a real working device and test their own control algorithms on a…

danielwilczak101/EasyControls
Originally part of the NASA Asteroid flyer program has been repurposed by the EPPL to allow anyone interested in controls to go online and connect with a real working device and test their own control algorithms on a…

danielwilczak101/EasyControls
Originally part of the NASA Asteroid flyer program has been repurposed by the EPPL to allow anyone interested in controls to go online and connect with a real working device and test their own control algorithms on a…


Yes. The symbol is Analog_ADC:MCP3008 and the footprint Package_SO:SOIC-16_3.9x9.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
SOIC-16, with 16 pins. Its footprint is drawn on this page.
Microchip Technology publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C2651321, with 1,605 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the HX711 by Avia Semicon, the NAU7802SGI by Nuvoton Tech, the HX717 by Avia Semicon and the ADS1231ID by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
6 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.