MCP2518FD-H/SL

Microchip Technology

-40℃~+150℃ 10uA 2.7V~5.5V 20mA 8Mbps CAN FD Controller Monitor mode、Low-power mode、Programmable auto retransmission control SPI SOIC-14 CAN Controllers ROHS

Extended

Datasheetmicrochip/MCP2518FD-H/SL

Category: CAN Controllers
Package: SOIC-14
Pins: 14

Overview

The MCP2518FD-H/SL is a CAN Controller made by Microchip Technology in a SOIC-14 package with 14 pins. -40℃~+150℃ 10uA 2.7V~5.5V 20mA 8Mbps CAN FD Controller Monitor mode、Low-power mode、Programmable auto retransmission control SPI SOIC-14 CAN Controllers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MCP2518FDT-H_SLVAO, from EasyEDA) and its footprint (Package_SO:SOIC-14_3.9x8.7mm_P1.27mm, from KiCad's library), ready for a KiCad board. 887 are in stock at JLCPCB (part C626759).

Symbol

EasyEDA_Cloud:MCP2518FDT-H_SLVAOFrom EasyEDA

Footprint

Package_SO:SOIC-14_3.9x8.7mm_P1.27mmFrom KiCad's library

From the datasheet

Supply, least: 2.7 V · VDD, recommended operating min · p. 76
Supply, most: 5.5 V · VDD, recommended operating max · p. 76
Supply, absolute maximum: 6 V · VDD, absolute maximum · p. 75
Works from: -40 °C · Operating ambient min, High (H) grade · p. 79
Works up to: 150 °C · Operating ambient max, High (H) grade · p. 79
Junction, hottest: 165 °C · Virtual junction temperature absolute max · p. 75
Takes working: 15 mA · VDD supply current typical, 40 MHz SYSCLK, 20 MHz SPI activity · p. 76
Takes at most: 20 mA · VDD supply current max, 40 MHz SYSCLK, 20 MHz SPI activity · p. 76
Takes asleep: 15 µA · Sleep current typical, clock stopped, TAMB ≤ +85°C · p. 76
Takes asleep: 4 µA · Low Power Mode current typical, digital logic powered down · p. 76
Junction to air (SOIC-14): 149.5 K/W · Junction-to-ambient thermal resistance typical · p. 79
Data rate, most: 8 Mbit/s · CAN data bit rate max · p. 78

What it is and has

CAN arbitration bit rate: Up to 1 Mbps · p. 1
CAN data bit rate: Up to 8 Mbps · p. 1
SPI clock: Up to 20 MHz · p. 1
CAN standard: ISO 11898-1:2015 · p. 1
Message FIFOs: 31, configurable as Transmit or Receive FIFOs · p. 1
Transmit Queue: 1 · p. 1
Receive filtering: 32 Flexible Filter and Mask Objects · p. 1
Message RAM: 2 KB · p. 1
Interrupt pins: Up to 3 configurable · p. 1
Diagnostics: Bus Health Diagnostics and Error Counters · p. 1
Transceiver control: Standby control · p. 1
RAM protection: Error Correction Code (ECC) · p. 1
CAN FD conformance: Passed ISO 16845-1:2016 conformance tests · p. 92

Specifications

Parameter	Conditions	As printed	Page
VDD VDD		min -0.3 · max 6 V	75
DC Voltage at all I/O w.r.t GND		min -0.3 V	75
Virtual Junction Temperature, TVJ (IEC60747-1) TVJ		min -40 · max 165 °C	75
Soldering temperature of leads (10 seconds)	10 seconds	max 300 °C	75
ESD protection on all pins (IEC 801; Human Body Model)	Human Body Model	min -4 · max 4 kV	75
ESD protection on all pins (IEC 801; Machine Model)	Machine Model	min -400 · max 400 V	75
ESD protection on all pins (IEC 801; Charge Device Model)	Charge Device Model	min -750 · max 750 V	75
Voltage Range VDD	RAM data retention guaranteed	min 2.7 · max 5.5 V	76
Power-on Reset Voltage VPORH	Highest voltage on VDD before device releases POR	max 2.65 V	76
Power-on Reset Voltage VPORL	Lowest voltage on VDD before device asserts POR	min 2.2 V	76
VDD Rise Rate to ensure POR SVDD	Note 1: Characterized; not 100% tested.	min 0.05 V/ms	76
Supply Current IDD	40 MHz SYSCLK, 20 MHz SPI activity	typ 15 · max 20 mA	76
Sleep Current IDDS	Clock is stopped; TAMB ≤ +85°C (Note 1)	typ 15 · max 60 A	76
Sleep Current IDDS	Clock is stopped; TAMB ≤ +150°C	max 600 A	76
LPM Current IDDLPM	Digital logic powered down	typ 4 · max 10 A	76
Low-Level Input Voltage VIL		min -0.3 V	76
OSC1 detection Voltage VOSCPP	Minimum peak-to-peak voltage on OSC1 pin (Note 1)	min 0.5 V	76
Input Leakage Current ILI	OSC1	min -5 · max 5 A	76
Input Leakage Current ILI	All other	min -1 · max 1 A	76
Low-Level Output Voltage VOL	TXCAN; IOL = 8 mA, VDD = 2.7V	max 0.6 V	76
Low-Level Output Voltage VOL	All other; IOL = 2 mA, VDD = 2.7V	max 0.6 V	76
CLKO Output High TCLKOH	at 40 MHz (Note 1)	min 8 ns	77
CLKO Output Low TCLKOL	Note 1	min 8 ns	77
CLKO Output Rise TCLKOR	Note 1	max 5 ns	77
CLKO Output Fall TCLKOF	Note 1	max 5 ns	77
OSC1 Input Frequency FOSC1,CLKI	External digital clock	min 2 · typ 40 · max 40 MHz	77
OSC1 Input Frequency FOSC1,4M	4 MHz crystal/resonator (Note 1)	typ 4 MHz	77
SYSCLK frequency drift FDRIFT	Additional frequency drift of SYSCLK due to internal PLL at 4 MHz (Note 1)	max 10 ppm	77
OSC1 Input Frequency FOSC1,20M	20 MHz crystal/resonator (Note 1)	typ 20 MHz	77
OSC1 Input Frequency FOSC1,40M	40 MHz crystal/resonator (Note 1)	typ 40 MHz	77
TOSC1=1/FOSC1,x TOSC1		min 25 ns	77
OSC1 Input Rise TOSC1R	Note 2: Design guidance only.	max 20 ns	77
OSC1 Input Fall TOSC1F	Note 2: Design guidance only.	max 20 ns	77
Duty Cycle on OSC1 DCOSC1	External clock duty cycle requirement (Note 1)	min 45 · typ 50 · max 55 %	77
Oscillator stabilization period TOSCSTAB	From POR to final frequency (Note 1)	max 3 ms	77
Oscillator stabilization from Sleep TOSCSLEEP	From Sleep to final frequency (Note 1)	max 3 ms	77
Transconductance GM,4M	4 MHz crystal (Note 2)	min 1470 · max 2210 A/V	77
Transconductance GM,40M	40 MHz crystal (Note 2)	min 2040 · max 3060 A/V	77
Nominal Bit Rate BRNOM		min 0.125 · typ 0.5 · max 1 Mbps	78
Data Bit Rate BRDATA	BRDATA ≥ BRNOM	min 0.5 · typ 2 · max 8 Mbps	78
Filter propagation delay TPROP	Note 2: Design guidance only.	typ 1 ns	78
Filter time TFILTER	T00FILTER; Note 3	min 50 · max 100 ns	78
Filter time TFILTER	T01FILTER; Note 3	min 80 · max 140 ns	78
Filter time TFILTER	T10FILTER; Note 3	min 130 · max 220 ns	78
Filter time TFILTER	T11FILTER; Note 3	min 225 · max 390 ns	78
Minimum high time on input for output to go high again TREVOCERY	Note 2: Design guidance only.	min 5 ns	78
SCK Input Frequency FSCK	Note 3: FSCK must be less than or equal to FSYSCLK/2.	max 20 MHz	79
SCK Period, TSCK=1/FSCK TSCK	Note 3	min 50 ns	79
SCK High Time TSCKH		min 20 ns	79
SCK Low Time TSCKL		min 20 ns	79
SCK Rise Time TSCKR	Note 2: Design guidance only.	max 100 ns	79
SCK Fall Time TSCKF	Note 2: Design guidance only.	max 100 ns	79
SDI Setup: SDI ↕ to SCK ↑ TSDI2SCK		min 5 ns	79
SDI Hold: SCK ↑ to SDI ↕ TSCK2SDI		min 5 ns	79
SDO Valid: SCK ↓ to SDO ↕ TSCK2SDO	CLOAD = 50 pF	max 20 ns	79
Operating Temperature Range TA	High (H)	min -40 · max 150 °C	79
Storage Temperature Range TA		min -55 · max 150 °C	79
Thermal Resistance for SOIC-14 JA	SOIC-14	typ 149.5 °C/W	79

Parameters

Current - Supply: 15mA
Current - Supply(Max): 20mA
Data Rate: 8Mbps
Features: Programmable auto retransmission control
Junction Temperature(Max): 165℃
Operating Temperature: -40℃~+150℃
Protocol: SPI
Quiescent Supply Current: 10uA
Standby Current: 15uA
Thermal Resistance(Junction to Ambient): 149.5℃/W
Type: CAN FD Controller
Voltage - Supply: 2.7V~5.5V
Voltage - Supply(Absolute Max): 6V

Order codes

MCP2518FDT-H/SLLCSC C626759

Pinout

The pins of the MCP2518FD-H/SL
Pin	Name	Type
1	TXCAN	Unspecified
2	RXCAN	Unspecified
3	CLKO/SOF	Unspecified
4	INT#	Unspecified
5	OSC2	Unspecified
6	OSC1	Unspecified
7	VSS	Unspecified
8	INT1#/GPIO1	Unspecified
9	INT0#/GPIO0/XSTBY	Unspecified
10	SCK	Unspecified
11	SDI	Unspecified
12	SDO	Unspecified
13	nCS	Unspecified
14	VDD	Unspecified

Show this part on your page

A live frame, for any web page

<iframe src="https://pcbkit.io/embed/parts/microchip/MCP2518FD-H/SL" title="MCP2518FD-H/SL in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

A picture

<img src="https://pcbkit.io/embed/parts/microchip/MCP2518FD-H/SL.jpg" alt="MCP2518FD-H/SL" width="1200" height="900">

A picture that opens the part, for a README

[![MCP2518FD-H/SL](https://pcbkit.io/embed/parts/microchip/MCP2518FD-H/SL.jpg?size=s)](https://pcbkit.io/parts/microchip/MCP2518FD-H/SL)

Questions

Is there a KiCad symbol and footprint for the MCP2518FD-H/SL?

Yes. The symbol is EasyEDA_Cloud:MCP2518FDT-H_SLVAO and the footprint Package_SO:SOIC-14_3.9x8.7mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP2518FD-H/SL?

SOIC-14, with 14 pins. Its footprint is drawn on this page.

Where is the MCP2518FD-H/SL datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP2518FD-H/SL?

JLCPCB lists it as part C626759, with 887 in stock; the sellers' links on this page open their listings.

What can replace the MCP2518FD-H/SL?

Parts like it in the library: the MCP2518FD-E/SL by Microchip Technology, the MCP2517FD-H/SL by Microchip Technology, the MCP2518FD-H/SLVAO by Microchip Technology and the XLMCP2517FDT-H/SL by XINLUDA. Check their datasheets: a part that fits the footprint may still differ in its ratings.