Skip to the content
1234567891011121314

MCP2221-I/P

Microchip TechnologyExtended

-40℃~+85℃ 3V~5.5V USB to UART、USB to I2C PDIP-14 USB Converters ROHS

Part id
microchip/MCP2221-I/P
Category
USB Converters
Package
PDIP-14
Pins
14
In stock
7 at JLCPCB (C636791)
Used on
7 open-source boards

Overview

The MCP2221-I/P is a USB Converter made by Microchip Technology in a PDIP-14 package with 14 pins. -40℃~+85℃ 3V~5.5V USB to UART、USB to I2C PDIP-14 USB Converters ROHS.

PCBKit's library has its footprint (Package_DIP:DIP-14_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 7 are in stock at JLCPCB (part C636791). 7 open-source boards in 5 repositories on GitHub use it.

Symbol

The library has no symbol for this part yet.

Footprint

1234567891011121314
Package_DIP:DIP-14_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Open-source boards using it

7
  • 2 layers90.6 × 77.8 mmEmurom, the printed circuit board in 3D

    Emurom

    jtsiomb/emurom

    ROM emulator. Accepts ROM images through USB and acts as a parallel ROM chip.

    58 parts15CC-BY-SA-4.0
  • 4 layers39.8 × 39.8 mmLow cost multispectral sensor, the printed circuit board in 3D

    Low cost multispectral sensor

    Matthew-Bon/low_cost_multispectral_sensor

    AS726x based sensor with USB interface.

    44 partsMIT
  • 2 layers46 × 22 mmPower Board, the printed circuit board in 3D

    Power Board

    timohueser/MyoSense

    As mentioned before the MyoSense Sensor Modules use dry stainless steel electrodes to pick up the small voltages generated by muscle activity on the skin above the monitored muscle.

    26 partsGPL-3.0
  • 2 layers46 × 22 mmRF24+USB Module, the printed circuit board in 3D

    RF24+USB Module

    timohueser/MyoSense

    As mentioned before the MyoSense Sensor Modules use dry stainless steel electrodes to pick up the small voltages generated by muscle activity on the skin above the monitored muscle.

    34 partsGPL-3.0

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the MCP2221-I/P?

Yes. the footprint Package_DIP:DIP-14_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP2221-I/P?

PDIP-14, with 14 pins. Its footprint is drawn on this page.

Where is the MCP2221-I/P datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP2221-I/P?

JLCPCB lists it as part C636791, with 7 in stock; the sellers' links on this page open their listings.

What can replace the MCP2221-I/P?

Parts like it in the library: the MCP2221A-I/P by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP2221-I/P?

7 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.