Skip to the content
12345678

MCP1407-E/SN

Microchip TechnologyExtended

-40℃~+125℃ 1 130uA 20ns 20ns 4.5V~18V 6A 6A MOSFET SOP-8 Gate Drivers ROHS

Part id
microchip/MCP1407-E/SN
Category
Gate Drivers
Package
SOP-8
Pins
8
In stock
429 at JLCPCB (C52138)
Used on
4 open-source boards

Overview

The MCP1407-E/SN is a gate Driver made by Microchip Technology in a SOP-8 package with 8 pins. -40℃~+125℃ 1 130uA 20ns 20ns 4.5V~18V 6A 6A MOSFET SOP-8 Gate Drivers ROHS.

PCBKit's library has its KiCad symbol (Analog & Interface:MCP1407-E/SN, from CERN's library) and its footprint (Package_SO:SOP-8_3.76x4.96mm_P1.27mm, from KiCad's library), ready for a KiCad board. 429 are in stock at JLCPCB (part C52138). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

2IN3NC1VDD8VDD7OUT6OUT4GND5GND
Analog & Interface:MCP1407-E/SNFrom CERN's library

Footprint

12345678
Package_SO:SOP-8_3.76x4.96mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the MCP1407-E/SN
PinNameType
1VDDPower in
2INInput
3NCPassive
4GNDPower in
5GNDPower in
6OUTOutput
7OUTOutput
8VDDPower in

Open-source boards using it

4
  • 2 layers132.5 × 38 mmEmfi, the printed circuit board in 3D

    Emfi

    Ledger-Donjon/silicon-toaster

    SiliconToaster is an open-source hardware electromagnetic fault injection device, designed for hardware security research. It has the following features:

    81 parts60LGPL-3.0
  • 2 layers101.4 × 60 mmAtmega328p Spot welder, the printed circuit board in 3D

    Atmega328p Spot welder

    ANSHUMANDOCX/Spot-Welder-with-MCU

    this is a spot welder for 18650 batteries made using mosfets along with a atemga328p and rotary encoder along with a display and a 12v lead acid battery

    100 parts
  • 2 layers86 × 56.9 mmVoiture RC, the printed circuit board in 3D

    Voiture RC

    taillepierret/Voiture_RC

    28 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP1407-E/SN?

Yes. The symbol is Analog & Interface:MCP1407-E/SN and the footprint Package_SO:SOP-8_3.76x4.96mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP1407-E/SN?

SOP-8, with 8 pins. Its footprint is drawn on this page.

Where is the MCP1407-E/SN datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP1407-E/SN?

JLCPCB lists it as part C52138, with 429 in stock; the sellers' links on this page open their listings.

What can replace the MCP1407-E/SN?

Parts like it in the library: the EG2132 by EG Micro, the EG3001 by EG, the EG2104M by EG Micro and the EG3013S by EG Micro. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP1407-E/SN?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.