Skip to the content
1234567891011121314

ATTINY24A-PU

Microchip TechnologyExtended

-40℃~+85℃ 1.8V~5.5V 10bit 12 128Byte 128Byte 20MHz 2KB 8 Bit AVR Built-in FLASH PDIP-14 Microcontrollers (MCU/MPU/SOC) ROHS

Part id
microchip/ATTINY24A-PU
Category
Microcontrollers (MCU, MPU, SOC)
Package
PDIP-14
Pins
14
In stock
0 at JLCPCB (C1339745)
Used on
2 open-source boards

Overview

The ATTINY24A-PU is a microcontroller made by Microchip Technology in a PDIP-14 package with 14 pins. -40℃~+85℃ 1.8V~5.5V 10bit 12 128Byte 128Byte 20MHz 2KB 8 Bit AVR Built-in FLASH PDIP-14 Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_Microchip_ATtiny:ATtiny24A-P, from KiCad's library) and its footprint (Package_DIP:DIP-14_W7.62mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C1339745). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1VCC2XTAL1/PB03XTAL2/PB14RESET/PB35PB26PA77PA68PA59PA410PA311PA212PA113AREF/PA014GND
MCU_Microchip_ATtiny:ATtiny24A-PFrom KiCad's library

Footprint

1234567891011121314
Package_DIP:DIP-14_W7.62mmFrom KiCad's library

Pinout

14
The pins of the ATTINY24A-PU
PinNameType
1VCCPower in
2XTAL1/PB0Input/output
3XTAL2/PB1Input/output
4RESET/PB3Input/output
5PB2Input/output
6PA7Input/output
7PA6Input/output
8PA5Input/output
9PA4Input/output
10PA3Input/output
11PA2Input/output
12PA1Input/output
13AREF/PA0Input/output
14GNDPower in

Open-source boards using it

2
  • 2 layers50.5 × 52 mmWellerRT Station projekt, the printed circuit board in 3D

    WellerRT Station projekt

    MarcelMG/DIY-Soldering-Station-Controller

    A soldering station controller compatible with Weller RT tips

    45 parts44MIT
  • 2 layers30.7 × 57.8 mmOpenturret hat, the printed circuit board in 3D

    Openturret hat

    mrpossoms/openturret

    Opensource designs and software for autonomously aiming gimble

    8 parts1

Parts like it

5

Questions

Is there a KiCad symbol and footprint for the ATTINY24A-PU?

Yes. The symbol is MCU_Microchip_ATtiny:ATtiny24A-P and the footprint Package_DIP:DIP-14_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ATTINY24A-PU?

PDIP-14, with 14 pins. Its footprint is drawn on this page.

Where is the ATTINY24A-PU datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the ATTINY24A-PU?

JLCPCB lists it as part C1339745, with 0 in stock; the sellers' links on this page open their listings.

What can replace the ATTINY24A-PU?

Parts like it in the library: the ATTINY84A-PU by Microchip Technology, the ATTINY44A-PU by Microchip Technology, the ATTINY24-20PU by Microchip Technology and the ATTINY44-20PU by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ATTINY24A-PU?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.