Skip to the content
12345678910111213141516171819202122232425262728

ATMEGA168-20PU

Microchip TechnologyExtended

-40℃~+85℃ 10bit 16KB 1KB 2.7V~5.5V 20MHz 23 512Byte 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHS

Part id
microchip/ATMEGA168-20PU
Category
Microcontrollers (MCU, MPU, SOC)
Package
PDIP-28
Pins
28
In stock
1 at JLCPCB (C184885)
Used on
5 open-source boards

Overview

The ATMEGA168-20PU is a microcontroller made by Microchip Technology in a PDIP-28 package with 28 pins. -40℃~+85℃ 10bit 16KB 1KB 2.7V~5.5V 20MHz 23 512Byte 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_Microchip_ATmega:ATmega168-20P, from KiCad's library) and its footprint (Package_DIP:DIP-28_W7.62mm, from KiCad's library), ready for a KiCad board. 1 are in stock at JLCPCB (part C184885). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

1RESET/PC62PD03PD14PD25PD36PD47VCC8GND9XTAL1/PB610XTAL2/PB711PD512PD613PD714PB015PB116PB217PB318PB419PB520AVCC21AREF23PC024PC125PC226PC327PC428PC5
MCU_Microchip_ATmega:ATmega168-20PFrom KiCad's library

Footprint

12345678910111213141516171819202122232425262728
Package_DIP:DIP-28_W7.62mmFrom KiCad's library

Pinout

28
The pins of the ATMEGA168-20PU
PinNameType
1RESET/PC6Input/output
2PD0Input/output
3PD1Input/output
4PD2Input/output
5PD3Input/output
6PD4Input/output
7VCCPower in
8GNDPower in
9XTAL1/PB6Input/output
10XTAL2/PB7Input/output
11PD5Input/output
12PD6Input/output
13PD7Input/output
14PB0Input/output
15PB1Input/output
16PB2Input/output
17PB3Input/output
18PB4Input/output
19PB5Input/output
20AVCCPower in
21AREFPassive
22GNDPassive
23PC0Input/output
24PC1Input/output
25PC2Input/output
26PC3Input/output
27PC4Input/output
28PC5Input/output

Open-source boards using it

5
  • 2 layers86 × 70 mmAVR488, the printed circuit board in 3D

    AVR488

    VE7PMC/AVR488

    USB to IEEE-488 interface based on the ATmega168/328 microcontroller

    28 parts10GPL-3.0
  • 2 layers40.2 × 57.5 mmProj 7, the printed circuit board in 3D

    Proj 7

    Rbara00/Rob-Bara-College-Coding-Portfolio

    Robert Bara's Electrical Engineering College portfolio

    29 parts2
  • 2 layersNixie, the printed circuit board in 3D

    Nixie

    scrouthtv/vfd-clock

    Building a clock from VFD tubes

    32 partsGPL-3.0
  • 2 layers84.5 × 81.9 mmInterrupter, the printed circuit board in 3D

    Interrupter

    Caraffa-git/SD-Interrupter

    MIDI/SD Tesla coil interrupter

    42 parts1MIT
  • 2 layers32 × 32 mmDigit 8x9, the printed circuit board in 3D

    Digit 8x9

    eshazen/epic-hours

    EPIC-hours

    5 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ATMEGA168-20PU?

Yes. The symbol is MCU_Microchip_ATmega:ATmega168-20P and the footprint Package_DIP:DIP-28_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ATMEGA168-20PU?

PDIP-28, with 28 pins. Its footprint is drawn on this page.

Where is the ATMEGA168-20PU datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the ATMEGA168-20PU?

JLCPCB lists it as part C184885, with 1 in stock; the sellers' links on this page open their listings.

What can replace the ATMEGA168-20PU?

Parts like it in the library: the ATMEGA328P-PU by Microchip Technology, the PIC16F72-I/SP by Microchip Technology, the PIC16F883-I/SP by Microchip Technology and the PIC16F873A-I/SP by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ATMEGA168-20PU?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.