Skip to the content
12345678

ATECC608A-SSHDA-T

Microchip TechnologyExtended

-40℃~+85℃ 1Mbps I2C Wake-up function、Non-volatile configuration storage SOIC-8 Interface - Specialized ROHS

Part id
microchip/ATECC608A-SSHDA-T
Category
Security Verification, Encryption ICs
Package
SOIC-8
Pins
8
In stock
9,381 at JLCPCB (C616024)
Used on
18 open-source boards

Overview

The ATECC608A-SSHDA-T is a security Verification, Encryption IC made by Microchip Technology in a SOIC-8 package with 8 pins. -40℃~+85℃ 1Mbps I2C Wake-up function、Non-volatile configuration storage SOIC-8 Interface - Specialized ROHS.

PCBKit's library has its KiCad symbol (Security:ATECC608A-SSHDA, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 9,381 are in stock at JLCPCB (part C616024). 18 open-source boards in 16 repositories on GitHub use it.

Symbol

4GND5SDA6SCL8VCC
Security:ATECC608A-SSHDAFrom KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the ATECC608A-SSHDA-T
PinNameType
1NCNot connected
2NCNot connected
3NCNot connected
4GNDPower in
5SDAInput/output
6SCLInput
7NCNot connected
8VCCPower in

Open-source boards using it

18See all 18
  • 2 layers17 × 8.9 mmRaspiECCv1, the printed circuit board in 3D

    RaspiECCv1

    mgit-at/raspiECC

    ATECC608A for Raspberry PI

    7 parts34
  • 2 layers60 × 146.5 mmTilda6-bot, the printed circuit board in 3D

    Tilda6-bot

    emfcamp/TiDAL-Hardware

    88 parts4
  • 4 layers68.6 × 53.3 mmUNOQ ExperimentalShield, the printed circuit board in 3D

    UNOQ ExperimentalShield

    ffich/Arduino_UNO_Experimental_Shield

    Experimental shield for Arduino UNO form factor boards.

    124 parts4MIT
  • 4 layers160 × 117.5 mmDaveecu2, the printed circuit board in 3D

    Daveecu2

    miata-bot/daveecu2

    Speeduino Mainboard designed for NA Maita chassis

    249 parts3
  • 4 layers81.3 × 86.4 mmBluepill Carrier, the printed circuit board in 3D

    Bluepill Carrier

    ffich/Bluepill_Carrier

    Carrier Board for STM32 Bluepill board.

    154 parts1MIT
  • 2 layers73 × 77.5 mmUca dkaiot2-kicad, the printed circuit board in 3D

    Uca dkaiot2-kicad

    LEAT-EDGE/ambient-pcb-dkaiot

    The design also provides empty footprints for several other sensors which are not populated in the Ambient variant: - Light sensor (LITEON LTR-303ALS-01) - MEMS microphone (Knowles SPH0645LM4H) - Indoor air quality…

    184 partsCERN-OHL-P-2.0
  • 2 layers57 × 63 mmBigbutton, the printed circuit board in 3D

    Bigbutton

    mildlyfunctionalgays/bigbutton

    PCB and firmware for a keyboard with one, huge, button

    58 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ATECC608A-SSHDA-T?

Yes. The symbol is Security:ATECC608A-SSHDA and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ATECC608A-SSHDA-T?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the ATECC608A-SSHDA-T datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the ATECC608A-SSHDA-T?

JLCPCB lists it as part C616024, with 9,381 in stock; the sellers' links on this page open their listings.

What can replace the ATECC608A-SSHDA-T?

Parts like it in the library: the ATSHA204A-SSHDA-B by Microchip Technology, the ATSHA204A-SSHDA-T by Microchip Technology, the AT88SC0104CA-SH by Microchip Technology and the ATECC608B-SSHDA-T by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ATECC608A-SSHDA-T?

18 boards in 16 repositories on GitHub; the most starred are listed on this page, with their KiCad files.