Skip to the content
12345678

25LC512-I/P

Microchip TechnologyExtended

-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 20MHz 512Kbit 5ms Hardware write protection function、Built-in power-on reset (POR)、Built-in write enable latch (WEL)、Power-down/Power-up protection circuit SPI PDIP-8 EEPROM ROHS

Part id
microchip/25LC512-I/P
Category
EEPROM
Package
PDIP-8
Pins
8
In stock
318 at JLCPCB (C1349146)
Used on
6 open-source boards

Overview

The 25LC512-I/P is an EEPROM made by Microchip Technology in a PDIP-8 package with 8 pins. -40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 20MHz 512Kbit 5ms Hardware write protection function、Built-in power-on reset (POR)、Built-in write enable latch (WEL)、Power-down/Power-up protection circuit SPI PDIP-8 EEPROM ROHS.

PCBKit's library has its KiCad symbol (Memory_EEPROM:25LCxxx, from KiCad's library) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 318 are in stock at JLCPCB (part C1349146). 6 open-source boards in 6 repositories on GitHub use it.

Symbol

1CS2MISO3WP4GND5MOSI6SCK7HOLD8VCC
Memory_EEPROM:25LCxxxFrom KiCad's library

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

8
The pins of the 25LC512-I/P
PinNameType
1CSInput
2MISOTri-state
3WPInput
4GNDPower in
5MOSIInput
6SCKInput
7HOLDInput
8VCCPower in

Open-source boards using it

6
  • 2 layers99.1 × 88.9 mm1002 EPROM EMU NG 2.2d, the printed circuit board in 3D

    1002 EPROM EMU NG 2.2d

    Kris-Sekula/EPROM-EMU-NG

    EPROM Emulator Project with Arduino

    49 parts161Apache-2.0
  • 6 layers313 × 259.5 mmOpen8-vga motherboard, the printed circuit board in 3D

    Open8-vga motherboard

    adham404/Open8-VGA

    An 8-bit computer from 74HC logic: microcoded CPU, VGA, PS/2, on-board editor and assembler. Play it in your browser.

    322 parts3MIT
  • 4 layers76 × 76.9 mmDsp amplifier x4, the printed circuit board in 3D

    Dsp amplifier x4

    blus-audio/hardware

    Audio hardware

    179 parts1CERN-OHL-S-2.0
  • 2 layers410.2 × 181.6 mmControlBoard, the printed circuit board in 3D

    ControlBoard

    andreaslagler/giove8k

    Giove 8k audio synthesizer project

    247 partsGPL-3.0
  • 4 layers200 × 50 mmMemory, the printed circuit board in 3D

    Memory

    pottsali/cpu-pub

    Homebrew CPU project

    77 parts3
  • 2 layers51.4 × 57.2 mmMemory, the printed circuit board in 3D

    Memory

    depletionmode/cupc8

    Then run kernel/debug.sh. The guest display is embedded by default; use kernel/debug.sh --display:window for the standalone SDL window. Terminal graphics and color treatment can be selected explicitly:

    13 parts2

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the 25LC512-I/P?

Yes. The symbol is Memory_EEPROM:25LCxxx and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the 25LC512-I/P?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the 25LC512-I/P datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the 25LC512-I/P?

JLCPCB lists it as part C1349146, with 318 in stock; the sellers' links on this page open their listings.

What can replace the 25LC512-I/P?

Parts like it in the library: the 25LC512-E/P by Microchip Technology, the 25AA1024-I/P by Microchip Technology, the 25AA512-I/P by Microchip Technology and the 25LC1024-E/P by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the 25LC512-I/P?

6 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.