
24AA256-I/SN
Microchip TechnologyExtended
-40℃~+85℃ 1,000,000 cycles 1.7V~5.5V 200 Years 256Kbit 400kHz 5ms Hardware write protection function、Noise suppression function I2C SOIC-8 EEPROM ROHS
- Part id
- microchip/24AA256-I/SN
- Category
- EEPROM
- Package
- SOIC-8
- Pins
- 8
- In stock
- 58 at JLCPCB (C152169)
- Used on
- 2 open-source boards
Overview
The 24AA256-I/SN is an EEPROM made by Microchip Technology in a SOIC-8 package with 8 pins. -40℃~+85℃ 1,000,000 cycles 1.7V~5.5V 200 Years 256Kbit 400kHz 5ms Hardware write protection function、Noise suppression function I2C SOIC-8 EEPROM ROHS.
PCBKit's library has its KiCad symbol (Logic:24AA256-I/SN, from CERN's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 58 are in stock at JLCPCB (part C152169). 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
9- Supply, least
- 1.7 V · VCC, recommended operating min · p. 2
- Supply, most
- 5.5 V · VCC, recommended operating max · p. 2
- Supply, absolute maximum
- 6.5 V · VCC, absolute max · p. 2
- Works from
- -40 °C · Industrial (I), operating ambient min · p. 2
- Works up to
- 85 °C · Industrial (I), operating ambient max · p. 2
- Takes working
- 400 µA · Read operating current max, VCC = 5.5V, SCL = 400 kHz · p. 2
- Takes at most
- 3 mA · Write operating current max, VCC = 5.5V · p. 2
- Takes asleep
- 1.5 µA · Standby current max, industrial, VCC = 5.5V · p. 2
- Takes asleep
- 1 µA · Standby current max, industrial, VCC = 3.6V · p. 2
What it is and has
11- EEPROM memory
- 32K x 8 (256 Kbit) · p. 1
- Interface
- 2-wire serial, I2C compatible · p. 1
- Bus addressing
- Up to eight devices · p. 1
- Input conditioning
- Schmitt trigger inputs · p. 1
- Page write buffer
- 64 bytes · p. 1
- Write timing
- Self-timed erase/write cycle · p. 1
- Protection
- Hardware write-protect · p. 1
- ESD protection
- >4000V · p. 1
- Endurance
- More than one million erase/write cycles · p. 1
- Data retention
- >200 years · p. 1
- Compliance
- RoHS · p. 1
Around it
2- res 10 kΩ
- between SDA and VCC; Typical SDA pull-up for 100 kHz operation. · p. 5
- res 2 kΩ
- between SDA and VCC; Typical SDA pull-up for 400 kHz operation. · p. 5
Specifications
45| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| VCC VCC | max 6.5 V | 2 | |
| All inputs and outputs w.r.t. VSS | Maximum: VCC +1.0V | min -0.6 V | 2 |
| Storage temperature | min -65 · max 150 °C | 2 | |
| Ambient temperature with power applied | min -40 · max 125 °C | 2 | |
| VCC VCC | Industrial (I) | min 1.7 · max 5.5 V | 2 |
| TA TA | Industrial (I) | min -40 · max 85 °C | 2 |
| Low-level output voltage VOL | IOL = 3.0 mA @ VCC = 4.5V | max 0.4 V | 2 |
| Low-level output voltage VOL | IOL = 2.1 mA @ VCC = 2.5V | max 0.4 V | 2 |
| Input leakage current ILI | VIN = VSS or VCC, WP = VSS; maximum magnitude ±1 uA | max 1 A | 2 |
| Input leakage current ILI | VIN = VSS or VCC, WP = VCC; maximum magnitude ±1 uA | max 1 A | 2 |
| Output leakage current ILO | VOUT = VSS or VCC; maximum magnitude ±1 uA | max 1 A | 2 |
| Pin capacitance (all inputs/outputs) CIN, COUT | VCC = 5.0V, TA = 25°C, FCLK = 1 MHz; periodically sampled and not 100% tested | max 10 pF | 2 |
| Operating current ICC Read | VCC = 5.5V, SCL = 400 kHz | max 400 A | 2 |
| Operating current ICC Write | VCC = 5.5V | max 3 mA | 2 |
| Standby current ICCS | TA = -40°C to +85°C; SCL = SDA = VCC = 5.5V; A0, A1, A2, WP = VSS | max 1.5 A | 2 |
| Standby current ICCS | TA = -40°C to +85°C; SCL = SDA = VCC = 3.6V; A0, A1, A2, WP = VSS | max 1 A | 2 |
| Clock frequency FCLK | 1.7V ≤ VCC < 2.5V | max 100 kHz | 3 |
| Clock frequency FCLK | 2.5V ≤ VCC ≤ 5.5V | max 400 kHz | 3 |
| Clock high time THIGH | 1.7V ≤ VCC < 2.5V | min 4000 ns | 3 |
| Clock high time THIGH | 2.5V ≤ VCC ≤ 5.5V | min 600 ns | 3 |
| Clock low time TLOW | 1.7V ≤ VCC < 2.5V | min 4700 ns | 3 |
| Clock low time TLOW | 2.5V ≤ VCC ≤ 5.5V | min 1300 ns | 3 |
| SDA and SCL rise time TR | 1.7V ≤ VCC < 2.5V; Note 1: not 100% tested | max 1000 ns | 3 |
| SDA and SCL rise time TR | 2.5V ≤ VCC ≤ 5.5V; Note 1: not 100% tested | max 300 ns | 3 |
| SDA and SCL fall time TF | All except, 24FC256; Note 1: not 100% tested | max 300 ns | 3 |
| Start condition hold time THD:STA | 1.7V ≤ VCC < 2.5V | min 4000 ns | 3 |
| Start condition hold time THD:STA | 2.5V ≤ VCC ≤ 5.5V | min 600 ns | 3 |
| Start condition setup time TSU:STA | 1.7V ≤ VCC < 2.5V | min 4700 ns | 3 |
| Start condition setup time TSU:STA | 2.5V ≤ VCC ≤ 5.5V | min 600 ns | 3 |
| Data input hold time THD:DAT | Note 2 | min 0 ns | 3 |
| Data input setup time TSU:DAT | 1.7V ≤ VCC < 2.5V | min 250 ns | 3 |
| Data input setup time TSU:DAT | 2.5V ≤ VCC ≤ 5.5V | min 100 ns | 3 |
| Stop condition setup time TSU:STO | 1.7V ≤ VCC < 2.5V | min 4000 ns | 3 |
| Stop condition setup time TSU:STO | 2.5V ≤ VCC ≤ 5.5V | min 600 ns | 3 |
| WP setup time TSU:WP | 1.7V ≤ VCC < 2.5V | min 4000 ns | 3 |
| WP setup time TSU:WP | 2.5V ≤ VCC ≤ 5.5V | min 600 ns | 3 |
| WP hold time THD:WP | 1.7V ≤ VCC < 2.5V | min 4700 ns | 3 |
| WP hold time THD:WP | 2.5V ≤ VCC ≤ 5.5V | min 1300 ns | 3 |
| Output valid from clock TAA | 1.7 V ≤ VCC < 2.5V; Note 2 | max 3500 ns | 4 |
| Output valid from clock TAA | 2.5 V ≤ VCC ≤ 5.5V; Note 2 | max 900 ns | 4 |
| Bus free time: Time the bus must be free before a new transmission can start TBUF | 1.7V ≤ VCC < 2.5V | min 4700 ns | 4 |
| Bus free time: Time the bus must be free before a new transmission can start TBUF | 2.5V ≤ VCC ≤ 5.5V | min 1300 ns | 4 |
| Output fall time from VIH minimum to VIL maximum TOF | All except, 24FC256; CB ≤ 100 pF; minimum 10 + 0.1CB ns; Note 1 | max 250 ns | 4 |
| Input filter spike suppression (SDA and SCL pins) TSP | All except, 24FC256; Notes 1 and 3 | max 50 ns | 4 |
| Write cycle time (byte or page) TWC | max 5 ms | 4 |
Pins, by the datasheet
8- 1 A0
- User configurable chip select; connect to VCC or VSS. · p. 5
- 2 A1
- User configurable chip select; connect to VCC or VSS. · p. 5
- 3 A2
- User configurable chip select; connect to VCC or VSS. · p. 5
- 4 VSS
- Ground. · p. 5
- 5 SDA
- Bidirectional serial data and address transfer; requires a pull-up resistor to VCC. · p. 5
- 6 SCL
- Serial clock input synchronizes data transfer to and from the device. · p. 5
- 7 WP
- Connect to VSS to enable writes or VCC to inhibit writes; reads remain enabled. · p. 5
- 8 VCC
- +1.7V to 5.5V supply for 24AA256. · p. 5
Open-source boards using it
2- 4 layers160 × 100 mm

- 2 layers114.3 × 104.1 mm

Parts like it
8M24C02-WMN6TP
SOIC-8-40℃~+85℃ 2.5V~5.5V 200 Years 2Kbit 4,000,000 Cycles 400kHz 5ms I2C SOIC-8 EEPROM ROHSSTMicroelectronicsEEPROMM24C02-RMN6TP
SOIC-8-40℃~+85℃ 1.8V~5.5V 200 Years 2Kbit 4,000,000 Cycles 400kHz 5ms Hardware write protection function、Built-in power-on reset (POR) I2C SOIC-8 EEPROM ROHSSTMicroelectronicsEEPROM24LC256T-I/SN
SOIC-8-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 256Kbit 400kHz 5ms Hardware write protection function、Noise suppression function I2C SOIC-8 EEPROM ROHSMicrochip TechnologyEEPROMCAT24C08WI-GT3
SOIC-8-40℃~+85℃ 1,000,000 cycles 1.7V~5.5V 100 Years 400kHz 5ms 8Kbit Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) I2C SOIC-8 EEPROM ROHSonsemiEEPROMM24C32-WMN6TP
SOIC-8-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 32Kbit 40 Years 400kHz 5ms Hardware write protection function、Built-in power-on reset (POR)、Built-in error correction code (ECC) function I2C SOIC-8 EEPROM ROHSSTMicroelectronicsEEPROM24LC512T-I/SN
SOIC-8-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 400kHz 512Kbit 5ms Hardware write protection function、Noise suppression function I2C SOIC-8 EEPROM ROHSMicrochip TechnologyEEPROM24LC64T-I/SN
SOIC-8-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 400kHz 5ms 64Kbit Hardware write protection function、Noise suppression function I2C SOIC-8 EEPROM ROHSMicrochip TechnologyEEPROMM24C02-FMN6TP
SOIC-8-40℃~+85℃ 1.7V~5.5V 200 Years 2Kbit 4,000,000 Cycles 400kHz 5ms Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) I2C SOIC-8 EEPROM ROHSSTMicroelectronicsEEPROM
Questions
Is there a KiCad symbol and footprint for the 24AA256-I/SN?
Yes. The symbol is Logic:24AA256-I/SN and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the 24AA256-I/SN?
SOIC-8, with 8 pins. Its footprint is drawn on this page.
Where is the 24AA256-I/SN datasheet?
Microchip Technology publishes it: the Datasheet link on this page opens it.
Where can I order the 24AA256-I/SN?
JLCPCB lists it as part C152169, with 58 in stock; the sellers' links on this page open their listings.
What can replace the 24AA256-I/SN?
Parts like it in the library: the M24C02-WMN6TP by STMicroelectronics, the M24C02-RMN6TP by STMicroelectronics, the 24LC256T-I/SN by Microchip Technology and the CAT24C08WI-GT3 by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the 24AA256-I/SN?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.