Skip to the content
12345678

MAX487EPA+

Maxim Integrated (Analog Devices)Extended

-40℃~+85℃ 1 1 250Kbps 4.75V~5.25V Transceiver PDIP-8 RS-485 / RS-422 ICs ROHS

Part id
maxim/MAX487EPA+
Category
RS 485, RS 422 ICs
Package
PDIP-8
Pins
8
In stock
5 at JLCPCB (C1544093)
Used on
16 open-source boards

Overview

The MAX487EPA+ is a RS 485, RS 422 IC made by Maxim Integrated (Analog Devices) in a PDIP-8 package with 8 pins. -40℃~+85℃ 1 1 250Kbps 4.75V~5.25V Transceiver PDIP-8 RS-485 / RS-422 ICs ROHS.

PCBKit's library has its KiCad symbol (Interface_UART:MAX487E, from KiCad's library) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 5 are in stock at JLCPCB (part C1544093). 16 open-source boards in 10 repositories on GitHub use it.

Symbol

1RO2RE3DE4DI5GND6A7B8VCC
Interface_UART:MAX487EFrom KiCad's library

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

8
The pins of the MAX487EPA+
PinNameType
1ROOutput
2REInput
3DEInput
4DIInput
5GNDPower in
6AInput/output
7BInput/output
8VCCPower in

Open-source boards using it

16See all 16
  • 2 layers55 × 55 mmDevice-1, the printed circuit board in 3D

    Device-1

    erdemcanaz/MODBUS

    The goal of this project is to design a hardware implementation that enables wireless Modbus communication using the LoRa protocol.

    64 parts1
  • 4 layers130 × 150 mmCampervan management V2, the printed circuit board in 3D

    Campervan management V2

    akladnig/CamperVan

    - CamperVan Design and Arduino Circuit Design - Campervan Design Overview - Dashboard App - Electrical System - Sensors - Circuit Design - Battery and voltage monitoring - Voltage Divider Design - Low Pass Filter - TODO

    183 parts
  • 2 layers166 × 60 mmCase Subt, the printed circuit board in 3D

    Case Subt

    ayuusweetfish/Tuengel

    (🚧✔️ Docs to-do) 《图恩格尔》· 多媒体舞台敲击装置部分 · Multimedia stage, robotic mallets component · 北京艺术与科技双年展 BATB 2024

    118 parts
  • 2 layers120 × 50 mmMtb led, the printed circuit board in 3D

    Mtb led

    kmzbrnoI/mtb-led-hw

    Hardware of MTB-LED module

    70 partsCC-BY-SA-4.0
  • 2 layers151.8 × 95.4 mmControl unit, the printed circuit board in 3D

    Control unit

    LoZioo/Domoticata

    Custom domotic home system.

    137 partsMIT
  • 2 layers86.5 × 33 mmPlatineA CNMB2, the printed circuit board in 3D

    PlatineA CNMB2

    maxx3105/HBW-1W-T10

    10 Kanal Temperatursensor für Homematic Wired.

    34 parts
  • 2 layers47 × 47 mmHBW IO-12-FM, the printed circuit board in 3D

    HBW IO-12-FM

    maxx3105/HBW-IO-12-FM

    Homematic Wired Modul mit 12 Ein- oder Ausgängen

    65 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MAX487EPA+?

Yes. The symbol is Interface_UART:MAX487E and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MAX487EPA+?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the MAX487EPA+ datasheet?

Maxim Integrated (Analog Devices) publishes it: the Datasheet link on this page opens it.

Where can I order the MAX487EPA+?

JLCPCB lists it as part C1544093, with 5 in stock; the sellers' links on this page open their listings.

What can replace the MAX487EPA+?

Parts like it in the library: the MAX485EN by HTC, the HGX3485ECN by HGSEMI, the HGX3485EIN by HGSEMI and the HGX485EIN by HGSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MAX487EPA+?

16 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.