Skip to the content
12

LMBR130T1G

Leshan Radio (LRC)Extended

-65℃~+125℃ 1 Independent 10uA 1A 30V 350mV 5.5A SOD-123 Schottky Diodes ROHS

Part id
lrc/LMBR130T1G
Category
Schottky Diodes
Package
SOD-123
Pins
2
In stock
68,228 at JLCPCB (C48974)
Used on
6 open-source boards

Overview

The LMBR130T1G is a schottky Diode made by Leshan Radio (LRC) in a SOD-123 package with 2 pins. -65℃~+125℃ 1 Independent 10uA 1A 30V 350mV 5.5A SOD-123 Schottky Diodes ROHS.

PCBKit's library has its KiCad symbol (Device:D_Schottky, from KiCad's library) and its footprint (Diode_SMD:D_SOD-123, from KiCad's library), ready for a KiCad board. 68,228 are in stock at JLCPCB (part C48974). 6 open-source boards in 4 repositories on GitHub use it.

Symbol

Device:D_SchottkyFrom KiCad's library

Footprint

12
Diode_SMD:D_SOD-123From KiCad's library

From the datasheet

7
Reverse voltage, most
30 V · peak repetitive reverse voltage, max · p. 2
Forward current, most
1 A · average rectified forward current, rated VR, TL = 65°C, max · p. 2
Junction, hottest
125 °C · operating junction temperature, max · p. 2
Junction to air (SOD−123)
230 K/W · junction to ambient, FR−4 or FR−5 with 1 inch Cu pad · p. 2
Forward voltage
350 mV · IF = 0.1 A, TJ = 25°C, max · p. 2
Forward voltage
450 mV · IF = 0.7 A, TJ = 25°C, max · p. 2
Forward voltage
470 mV · IF = 1.0 A, TJ = 25°C, typical · p. 2

Pinout

2
The pins of the LMBR130T1G
PinNameType
1KPassive
2APassive

Open-source boards using it

6
  • 4 layers94.1 × 152 mmDevelopment board panel, the printed circuit board in 3D

    Development board panel

    portapack-mayhem/mayhem-mdk

    PortaPack - Module Develoment Kit

    298 parts88GPL-3.0
  • 2 layers92.1 × 78.1 mmPaperd ink rev3, the printed circuit board in 3D

    Paperd ink rev3

    paperdink/paperd.ink_hw

    Hardware files for paperd.ink

    92 parts9CC-BY-SA-4.0
  • 4 layers41.5 × 41.5 mmZenFly F71, the printed circuit board in 3D

    ZenFly F71

    LongDo1902/STM32_Drone

    Developing quadcopter from scratch including stm32 programing and self-built flight controller PCB.

    180 parts
  • 2 layers125 × 85 mmTastatur, the printed circuit board in 3D

    Tastatur

    steewbsd/Tastatur

    145 parts
  • 4 layers74.1 × 24 mmDevelopment board, the printed circuit board in 3D

    Development board

    portapack-mayhem/mayhem-mdk

    PortaPack - Module Develoment Kit

    36 parts88GPL-3.0
  • 2 layers92.1 × 78.1 mmPaperd.ink, the printed circuit board in 3D

    Paperd.ink

    paperdink/paperd.ink_hw

    Hardware files for paperd.ink

    87 parts9CC-BY-SA-4.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LMBR130T1G?

Yes. The symbol is Device:D_Schottky and the footprint Diode_SMD:D_SOD-123, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LMBR130T1G?

SOD-123, with 2 pins. Its footprint is drawn on this page.

Where is the LMBR130T1G datasheet?

Leshan Radio (LRC) publishes it: the Datasheet link on this page opens it.

Where can I order the LMBR130T1G?

JLCPCB lists it as part C48974, with 68,228 in stock; the sellers' links on this page open their listings.

What can replace the LMBR130T1G?

Parts like it in the library: the B5819W by GOODWORK, the B5819W SL by Jiangsu Changjing Electronics Technology (CJ), the B5819W by MDD and the B5819W by hongjiacheng. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LMBR130T1G?

6 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.