Skip to the content
PCBKitNew board
123456

MOC3063

Lite-On

-40℃~+110℃ 0.4mA 1 1.4V 1000V/us 100mA 1A 20mA 250mW 5kV 6 600V TRIAC Yes DIP-6 Triac, SCR Output Optoisolators ROHS

Extended
DatasheetJLCPCBLCSClite-on/MOC3063
Category
Triac, SCR Output Optoisolators
Package
DIP-6
Pins
6

Overview

The MOC3063 is a triac, SCR Output Optoisolator made by Lite-On in a DIP-6 package with 6 pins. -40℃~+110℃ 0.4mA 1 1.4V 1000V/us 100mA 1A 20mA 250mW 5kV 6 600V TRIAC Yes DIP-6 Triac, SCR Output Optoisolators ROHS.

PCBKit's library has its KiCad symbol (dk_Optoisolators-Triac-SCR-Output:MOC3063, from Digikey) and its footprint (Package_DIP:DIP-6_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 320 are in stock at JLCPCB (part C78487). 7 open-source boards in 7 repositories on GitHub use it.

Symbol

124Sub56
dk_Optoisolators-Triac-SCR-Output:MOC3063From Digikey

Footprint

123456
Package_DIP:DIP-6_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Parameters

15
Current - Surge(Itsm)
1A
Features
Zero-crossing trigger
Forward Current
20mA
Holding Current (Ih)
0.4mA
Isolation Voltage(Vrms)
5kV
Load Voltage
600V
Number of Channels
1
Number of terminals
6
Operating Temperature
-40℃~+110℃
Output Current(It(rms))
100mA
Output Type
TRIAC
Power Dissipation
250mW
Static dv/dt
1000V/us
Voltage - Forward(Vf)
1.4V
Zero Crossing Circuit
Yes

Order codes

1

Pinout

6
The pins of the MOC3063
PinNameType
1—Passive
2—Passive
3NCNot connected
4—Passive
5SubPassive
6—Passive

Open-source boards using it

All 7
  • 2 layers96.3 × 98 mmAquarium, the printed circuit board in 3D

    Aquarium

    baranovskiykonstantin/aquarium

    Control the lighting and the heating of the aquarium.

    73 parts11
  • 2 layers55 × 53 mmHeatgun, the printed circuit board in 3D

    Heatgun

    m24h/heatgun

    A small hot air station for soldering, using type-858 heat gun as handle, STC8G1k17 as MCU, copper wire resistor for cold junction compensation

    40 parts3Apache-2.0
  • 2 layers100 × 69.5 mmPanoboard2, the printed circuit board in 3D

    Panoboard2

    CapnKernel/panoboard2

    A new controller board for Panasonic bread makers

    76 parts
  • 2 layers115 × 75 mmSecador toalha, the printed circuit board in 3D

    Secador toalha

    forg3/secadora-de-toalha

    Secador de toalhas inteligente em alumínio (390W/127V~): PCB dedicada KiCad 10, ESP32-C3, controle térmico isolado e modo eco.

    25 parts
  • 2 layers63 × 98 mmThermostat, the printed circuit board in 3D

    Thermostat

    sensei-hacker/open-smart-thermostat

    A 24 VAC HVAC thermostat board. A Seeed XIAO RP2040 handles temperature control and switches the HVAC wires through optically isolated triacs. An M5Stack Dial provides the user interface.

    76 partsMIT
  • 2 layersAfd, the printed circuit board in 3D

    Afd

    jduanen/alienFontDisplay

    Display made of six eight-segment EL display units

    50 parts1MIT
  • 2 layers70 × 56 mmBps switch, the printed circuit board in 3D

    Bps switch

    Sanu0910/RFMW-ANT

    41 parts

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/lite-on/MOC3063" title="MOC3063 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/lite-on/MOC3063.jpg" alt="MOC3063" width="1200" height="900">
A picture that opens the part, for a README
[![MOC3063](https://pcbkit.io/embed/parts/lite-on/MOC3063.jpg?size=s)](https://pcbkit.io/parts/lite-on/MOC3063)

Questions

Is there a KiCad symbol and footprint for the MOC3063?

Yes. The symbol is dk_Optoisolators-Triac-SCR-Output:MOC3063 and the footprint Package_DIP:DIP-6_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MOC3063?

DIP-6, with 6 pins. Its footprint is drawn on this page.

Where is the MOC3063 datasheet?

Lite-On publishes it: the Datasheet link on this page opens it.

Where can I order the MOC3063?

JLCPCB lists it as part C78487, with 320 in stock; the sellers' links on this page open their listings.

What can replace the MOC3063?

Parts like it in the library: the EL3053 by Everlight Electronics, the MOC3052 by Lite-On, the MOC3083 by Lite-On and the MOC3053M(UMW) by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MOC3063?

7 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8