2 layers99.9 × 70.5 mm
PCB puerta
yabo104/Electric_Door_With_ESP32_S3
This proyeject contains a hardware/firmware development for an electric door controller.
75 parts
2 layers100 × 69.5 mm
Panoboard2
CapnKernel/panoboard2A new controller board for Panasonic bread makers
- Size
- 100 × 69.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 76
- Nets
- 60
- Pads
- 212
- Tracks, vias
- 585, 30
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 May 2024
- Updated
- 21 Jan 2026
Overview
Panoboard2 is an open-source printed circuit board by CapnKernel, from the CapnKernel/panoboard2 repository on GitHub. It is a 2-layer board of 100 × 69.5 mm with 76 parts on 60 nets, routed with 585 tracks and 30 vias.
It is built around the BT136-600E, BT136S-600E and HLK-5M03, with the MOC3063, MOC3063S and SRV05-4 among its other parts. Its parts include 12 resistors, 9 connectors, 8 switches, 4 capacitors and 4 ICs.
Main components
9
BT136-600E
TO-220-40℃~+125℃@(Tj) 1 TRIAC 1.5V 1.5W 1.7V 10mA 15mA 30A 4A 600V TO-220 Thyristors (SCR)/Modules ROHSJSMSEMIThyristors (SCR)/Modules
BT136S-600E
TO-252Thyristors (SCR)/ModulesLGE
HLK-5M03
DIP,38x23mm1.5A 18mm 2.5kV 220uF 23mm 3.3V 38mm 50mVp-p 5W 70% 70V~350V 85VAC~264VAC AC/DC-DC Short Circuit Protection、Over Current Protection ±0.2% DIP,38x23mm AC-DC Power Modules ROHSHI-LINKAC-DC Power Modules
MOC3063
DIP-6-40℃~+110℃ 0.4mA 1 1.4V 1000V/us 100mA 1A 20mA 250mW 5kV 6 600V TRIAC Yes DIP-6 Triac, SCR Output Optoisolators ROHSLite-OnTriac, SCR Output Optoisolators
MOC3063S
SOP-6-55℃~+100℃ 1 1.5V 1000V/us 100mA 1A 330mW 5kV 6 600V 60mA TRIAC Yes SOP-6 Triac, SCR Output Optoisolators ROHSKTPTriac, SCR Output Optoisolators
SRV05-4
SOT-23-6L-55℃~+150℃ 15V 1pF 4A 5V 5uA 6V 80W ESD Four channels IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)10D271K
插件,P=7mm175V 2.5kA 225V 270V 370pF@1kHz 400mW 40J 455V 插件,P=7mm Varistors ROHSSURGINGVaristors
SKRHABE010
SMD-8P,7.5x7.5mmSMD-8P,7.5x7.5mm Multi-Directional Switches ROHSALPSALPINEMulti-Directional Switches
SS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
Parts
76| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | PCB_Pin_Breakout | TestPoint:TestPoint_Pad_1.0x1.0mm | JP1, JP22, JP23, JP24, JP25, JP29, JP30, JP31, JP32, JP33, JP34 |
| 5 | 10D271K | Varistor:RV_Disc_D12mm_W3.9mm_P7.5mm | RV1, RV2, RV3, RV4, RV5 |
| 5 | SW_Push | local:SW_Push_SPST_NO_432 | SW1, SW2, SW3, SW4, SW5 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | PCB_Patch | local:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | P2, P3 |
| 2 | R LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 100n 250V | Capacitor_THT:C_Rect_L9.0mm_W4.2mm_P7.50mm_MKT | C1 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R14 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 10n 1000V | Capacitor_THT:C_Rect_L18.0mm_W7.0mm_P15.00mm_FKS3_FKP3 | C3 |
| 1 | 220R | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 22R 2W | local:R_Axial_DIN0516_L15.5mm_D5.0mm_P22.2mm_Horizontal | R2 |
| 1 | 2N7000 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | 360R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R13 |
| 1 | 360R 1W | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R12 |
| 1 | 39R 2W | Resistor_THT:R_Axial_DIN0617_L17.0mm_D6.0mm_P20.32mm_Horizontal | R9 |
| 1 | 3uF 430VAC | local:C_Rect_L24.0mm_W12.6mm_P20.00mm_MKT | C2 |
| 1 | 5A | Fuse:Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open | F2 |
| 1 | BLK/MAINS L | local:TE-1742361-1-QC-Tab | J6 |
| 1 | BT136-600 | local:TO-220-3_Vertical | Q3 |
| 1 | BT136S-600 | Package_TO_SOT_SMD:TO-252-2 | Q2 |
| 1 | Buzzer | local:Buzzer_D12mm_H8.1mm | BZ1 |
| 1 | FUET9018 | Buzzer_Beeper:Buzzer_CUI_CPT-9019S-SMT | BZ2 |
| 1 | HLK-5M03 | Converter_ACDC:Converter_ACDC_Hi-Link_HLK-5Mxx | PS1 |
| 1 | I2C1 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J11 |
| 1 | I2C2 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J12 |
| 1 | M5STAMP-S3 | local:STAMP-S3-DIP_copy | U3 |
| 1 | MOC3063 | Package_DIP:DIP-6_W7.62mm | U6 |
| 1 | MOC3063S | local:SOIC-6 | U7 |
| 1 | MOLEX 53375-0810 | local:MOLEX_533750810 | J9 |
| 1 | ORA/MAINS N | local:TE-1742361-1-QC-Tab | J8 |
| 1 | R | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | R so I=10mA | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | R so I=5mA | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | Relay_SPDT | local:Relay_SPDT_SANYOU_SRD_Series_Form_C | K1 |
| 1 | RotaryEncoder_Switch_MP | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW6 |
| 1 | SKRHABE010 | local:SKRHABE010 | S1 |
| 1 | SRV05-4 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | SS34 | Diode_SMD:D_SMA | D3 |
| 1 | THERMISTOR | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J2 |
| 1 | TINYPICO | local:TINYPICO | M2 |
| 1 | WHT/HTR | local:TE-1742361-1-QC-Tab | J7 |
The 64 most common of 76 parts.
Questions
How big is the Panoboard2 PCB?
It measures 100 × 69.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Panoboard2 use?
76 parts, built around the BT136-600E, BT136S-600E, HLK-5M03 and MOC3063. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Panoboard2 KiCad files?
From the CapnKernel/panoboard2 repository on GitHub, at the commit this page was made from: the board is panoboard2.kicad_pcb and its schematic panoboard2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Panoboard2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask CapnKernel before reusing the design.
Similar boards
- 2 layers55 × 35 mm
- 2 layers176.4 × 133.2 mm
MainPCB v0.92
FilmNeverDie/Farbung
A open source project based on FilmNeverDie's CP800 film processing machine
207 parts25BSD-3-Clause - 2 layers120.4 × 85.7 mm
ESPrinkler Retic PCB
slippery-carrot/ESPrinkler-Retic-Controller
8-Zone reticulation controller based on ESPHome for Home Assistant
142 parts6GPL-3.0 - 2 layers140 × 64 mm
Thermostat v3
Connicpu/thermostat
DIY Zigbee thermostat (ESP32-C6) with day/night schedule and a Home Assistant Lovelace card
101 partsMIT - 4 layers150 × 80 mm
Mek output expander
mekatrol/electronics
This repository contains the electronics, embedded firmware, support software, and reference material for a collection of home-automation and workshop projects.
132 parts - 2 layers100.9 × 82 mm
MashMachine V2.0
xrayer2000/MashMachine
My own built brewing system for making wonderful beer at home
62 parts1 - 2 layers128 × 58.8 mm
Sensor energia bl0940
alejomancinelli/FCEIA_ProyectoFinal
Proyecto Final de Ing. Electrónica: Sistema de monitoreo de red eléctrica doméstica y/o industrial
44 parts