Skip to the content
21

EN5311QI

Intel/AlteraExtended

-40℃~+85℃ 1 1.1mm 1A 1uA 2.4V~6.6V 4MHz 4mm 5mVp-p 5mm 600mV~6V 700uF 94% Short Circuit Protection、Over Current Protection、Under Voltage Protection、Overheat Protection、Automatic fault recovery、Synchronous rectification control、Dynamic voltage scaling QFN-20-EP(4x5) Isolated Power Modules ROHS

Part id
intel-altera/EN5311QI
Category
Isolated Power Modules
Package
QFN-20-EP(4x5)
Pins
21
In stock
3 at JLCPCB (C163703)
Used on
1 open-source board

Overview

The EN5311QI is an isolated Power Module made by Intel/Altera in a QFN-20-EP(4x5) package with 21 pins. -40℃~+85℃ 1 1.1mm 1A 1uA 2.4V~6.6V 4MHz 4mm 5mVp-p 5mm 600mV~6V 700uF 94% Short Circuit Protection、Over Current Protection、Under Voltage Protection、Overheat Protection、Automatic fault recovery、Synchronous rectification control、Dynamic voltage scaling QFN-20-EP(4x5) Isolated Power Modules ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:EN5311QI, from EasyEDA) and its footprint (EasyEDA_Cloud:QFN-20_L5.0-W4.0-P0.50-TL-EP, from EasyEDA), ready for a KiCad board. 3 are in stock at JLCPCB (part C163703). 1 open-source board in 1 repository on GitHub use it.

Symbol

1VIN2VIN3GND4GND5VOUT6VOUT7VOUT8NC9NC10NC11NC12NC13NC14NC15VSENSE16VFB17VS218VS119VS020ENABLE21EP
EasyEDA_Cloud:EN5311QIFrom EasyEDA

Footprint

21
EasyEDA_Cloud:QFN-20_L5.0-W4.0-P0.50-TL-EPFrom EasyEDA

Pinout

21
The pins of the EN5311QI
PinNameType
1VINUnspecified
2VINUnspecified
3GNDUnspecified
4GNDUnspecified
5VOUTUnspecified
6VOUTUnspecified
7VOUTUnspecified
8NCUnspecified
9NCUnspecified
10NCUnspecified
11NCUnspecified
12NCUnspecified
13NCUnspecified
14NCUnspecified
15VSENSEUnspecified
16VFBUnspecified
17VS2Unspecified
18VS1Unspecified
19VS0Unspecified
20ENABLEUnspecified
21EPUnspecified

Open-source boards using it

1
  • 6 layers75 × 40 mmZoM Model A, the printed circuit board in 3D

    ZoM Model A

    ademenev/open_spectre

    An open-source FPGA-based EMS SPECTRE video synth

    145 parts2

Parts like it

2

Questions

Is there a KiCad symbol and footprint for the EN5311QI?

Yes. The symbol is EasyEDA_Cloud:EN5311QI and the footprint EasyEDA_Cloud:QFN-20_L5.0-W4.0-P0.50-TL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the EN5311QI?

QFN-20-EP(4x5), with 21 pins. Its footprint is drawn on this page.

Where is the EN5311QI datasheet?

Intel/Altera publishes it: the Datasheet link on this page opens it.

Where can I order the EN5311QI?

JLCPCB lists it as part C163703, with 3 in stock; the sellers' links on this page open their listings.

What can replace the EN5311QI?

Parts like it in the library: the TPSM84A21MOJT by Texas Instruments and the TPSM84A21MOJR by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the EN5311QI?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.