
WiredToBleKeyBoardPCB
bhaveshkys/wiredToBleKeyBoardPCB
pcb made for a device that converts a wired keyboard into a wireless one
INJOINICExtended
0℃~+70℃ 100uA 2.1A 4.2V 4.75V~5.5V Charging IC I2C Lithium Battery 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、过放保护、Overcurrent Protection、Short-Circuit Protection、过压保护 ESOP-8 Battery Management ROHS
The IP5306-I2C is a battery Management made by INJOINIC in a ESOP-8 package with 9 pins. 0℃~+70℃ 100uA 2.1A 4.2V 4.75V~5.5V Charging IC I2C Lithium Battery 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、过放保护、Overcurrent Protection、Short-Circuit Protection、过压保护 ESOP-8 Battery Management ROHS.
PCBKit's library has its KiCad symbol (OLIMEX_Regulators:IP5306, from Olimex) and its footprint (OLIMEX_Regulators-FP:eSOP8L, from Olimex), ready for a KiCad board. 1,857 are in stock at JLCPCB (part C488349). 1 open-source board in 1 repository on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | VIN | Power in |
| 2 | LED1 | Input/output |
| 3 | LED2 | Input/output |
| 4 | LED3 | Input/output |
| 5 | KEY | Input |
| 6 | BAT_Sense | Input |
| 7 | SW | Output |
| 8 | VOUT | Power out |
| 9 | GND | Power in |

bhaveshkys/wiredToBleKeyBoardPCB
pcb made for a device that converts a wired keyboard into a wireless one
Yes. The symbol is OLIMEX_Regulators:IP5306 and the footprint OLIMEX_Regulators-FP:eSOP8L, both drawn on this page. PCBKit places them on a board for you when you design with it.
ESOP-8, with 9 pins. Its footprint is drawn on this page.
INJOINIC publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C488349, with 1,857 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the IP5306 by INJOINIC, the IP5306_4.35V by INJOINIC and the IP5306-LC by INJOINIC. Check their datasheets: a part that fits the footprint may still differ in its ratings.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.