Skip to the content
123

IRLU024NPBF

Infineon TechnologiesExtended

-55℃~+175℃ 1 N-channel 15nC@5V 17A 2V 45W 480pF 55V 80mΩ@5V N-Channel TO-251(IPAK) MOSFETs ROHS

Part id
infineon/IRLU024NPBF
Category
MOSFETs
Package
TO-251(IPAK)
Pins
3
In stock
6,248 at JLCPCB (C3024)
Used on
13 open-source boards

Overview

The IRLU024NPBF is a MOSFET made by Infineon Technologies in a TO-251(IPAK) package with 3 pins. -55℃~+175℃ 1 N-channel 15nC@5V 17A 2V 45W 480pF 55V 80mΩ@5V N-Channel TO-251(IPAK) MOSFETs ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Q_NMOS_1G_2D_3S, from PCBKit's generic symbols) and its footprint (EasyEDA_Cloud:TO-251_L6.6-W2.4-P2.30-L, from EasyEDA), ready for a KiCad board. 6,248 are in stock at JLCPCB (part C3024). 13 open-source boards in 5 repositories on GitHub use it.

Symbol

Pinmap_Generic:Q_NMOS_1G_2D_3SFrom PCBKit's generic symbols

Footprint

123
EasyEDA_Cloud:TO-251_L6.6-W2.4-P2.30-LFrom EasyEDA

Pinout

3
The pins of the IRLU024NPBF
PinNameType
1GInput
2DPassive
3SPassive

Open-source boards using it

13See all 13
  • 2 layers60 × 126.6 mmV3 Connector + IRLED, the printed circuit board in 3D

    V3 Connector + IRLED

    PiTracLM/PiTrac

    Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)

    151 parts439GPL-2.0
  • 2 layers59.9 × 49.3 mmTvbgone kit v2.0, the printed circuit board in 3D

    Tvbgone kit v2.0

    maltman23/TV-B-Gone-kit_V2

    TV-B-Gone kit V2

    25 parts93
  • 4 layers65 × 56 mmPiDriver, the printed circuit board in 3D

    PiDriver

    AlpineOT/PiDriver

    KiCad Raspberry Pi Solenoid Driver Board

    60 partsBSD-3-Clause
  • 2 layers110 × 100 mmESP32LedControllerRGBWWfürJulia, the printed circuit board in 3D

    ESP32LedControllerRGBWWfürJulia

    dustedStacks/WLED-PCB-for-Neopixel-and-up-to-4-classic-LED-Stripes

    WLED PCB for Neopixel and up to 4 classic LED Stripes

    41 parts
  • 2 layers60 × 100 mmV3 Connector Only, the printed circuit board in 3D

    V3 Connector Only

    PiTracLM/PiTrac

    Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)

    65 parts439GPL-2.0
  • 2 layers75 × 75 mmHB UNI SEN BATT, the printed circuit board in 3D

    HB UNI SEN BATT

    FUEL4EP/HomeAutomation

    Home Automation repository of FUEL4EP

    31 parts15CC0-1.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the IRLU024NPBF?

Yes. The symbol is Pinmap_Generic:Q_NMOS_1G_2D_3S and the footprint EasyEDA_Cloud:TO-251_L6.6-W2.4-P2.30-L, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the IRLU024NPBF?

TO-251(IPAK), with 3 pins. Its footprint is drawn on this page.

Where is the IRLU024NPBF datasheet?

Infineon Technologies publishes it: the Datasheet link on this page opens it.

Where can I order the IRLU024NPBF?

JLCPCB lists it as part C3024, with 6,248 in stock; the sellers' links on this page open their listings.

What can replace the IRLU024NPBF?

Parts like it in the library: the IRFU3410PBF by Infineon Technologies, the TSM170N06CH C5G by Taiwan Semiconductor, the IRLU024NPBF-VB by VBsemi Elec and the FQU15N06L-VB by VBsemi Elec. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the IRLU024NPBF?

13 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.