
BTM7752G
Infineon TechnologiesExtended
-40℃~+150℃ 5uA 8V~18V Enable shutdown、Interleaved conduction protection、Dead-time control Full Bridge MOSFET DSO-36 Gate Drivers ROHS
- Part id
- infineon/BTM7752G
- Category
- Brushed DC Motor Drivers
- Package
- DSO-36
- Pins
- 36
- In stock
- 0 at JLCPCB (C534736)
- Used on
- 3 open-source boards
Overview
The BTM7752G is a brushed DC Motor Driver made by Infineon Technologies in a DSO-36 package with 36 pins. -40℃~+150℃ 5uA 8V~18V Enable shutdown、Interleaved conduction protection、Dead-time control Full Bridge MOSFET DSO-36 Gate Drivers ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:BTM7752G, from EasyEDA) and its footprint (EasyEDA_Cloud:PG-DSO-36_L13.0-W7.6-P0.65-LS10.6-BL, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C534736). 3 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
Pinout
36| Pin | Name | Type |
|---|---|---|
| 1 | 0UT1 | Unspecified |
| 2 | 0UT1 | Unspecified |
| 3 | 0UT1 | Unspecified |
| 4 | 0UT1 | Unspecified |
| 5 | GND | Unspecified |
| 6 | GND | Unspecified |
| 7 | GND | Unspecified |
| 8 | GND | Unspecified |
| 9 | IN1 | Unspecified |
| 10 | IN2 | Unspecified |
| 11 | VS | Unspecified |
| 12 | VS | Unspecified |
| 13 | VS | Unspecified |
| 14 | VS | Unspecified |
| 15 | 0UT2 | Unspecified |
| 16 | 0UT2 | Unspecified |
| 17 | 0UT2 | Unspecified |
| 18 | 0UT2 | Unspecified |
| 19 | OUT2 | Unspecified |
| 20 | OUT2 | Unspecified |
| 21 | OUT2 | Unspecified |
| 22 | OUT2 | Unspecified |
| 23 | GND | Unspecified |
| 24 | GND | Unspecified |
| 25 | GND | Unspecified |
| 26 | GND | Unspecified |
| 27 | INH | Unspecified |
| 28 | IS | Unspecified |
| 29 | VS | Unspecified |
| 30 | VS | Unspecified |
| 31 | VS | Unspecified |
| 32 | VS | Unspecified |
| 33 | OUT1 | Unspecified |
| 34 | OUT1 | Unspecified |
| 35 | OUT1 | Unspecified |
| 36 | OUT1 | Unspecified |
Open-source boards using it
3Questions
Is there a KiCad symbol and footprint for the BTM7752G?
Yes. The symbol is EasyEDA_Cloud:BTM7752G and the footprint EasyEDA_Cloud:PG-DSO-36_L13.0-W7.6-P0.65-LS10.6-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the BTM7752G?
DSO-36, with 36 pins. Its footprint is drawn on this page.
Where is the BTM7752G datasheet?
Infineon Technologies publishes it: the Datasheet link on this page opens it.
Where can I order the BTM7752G?
JLCPCB lists it as part C534736, with 0 in stock; the sellers' links on this page open their listings.
Which open-source boards use the BTM7752G?
3 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

