Skip to the content
12345678910111213141516

PCF8574P

HGSEMIExtended

-40℃~+85℃ 100kHz 10uA 2.5V~6V 25mA 300uA 8 8 Cascade and address expansion、Built-in LED driver I2C Interrupt Output Quasi-bidirectional output DIP-16 I/O Expanders ROHS

Part id
hgsemi/PCF8574P
Category
I, O Expanders
Package
DIP-16
Pins
16
In stock
1,012 at JLCPCB (C398073)
Used on
9 open-source boards

Overview

The PCF8574P is an i, O Expander made by HGSEMI in a DIP-16 package with 16 pins. -40℃~+85℃ 100kHz 10uA 2.5V~6V 25mA 300uA 8 8 Cascade and address expansion、Built-in LED driver I2C Interrupt Output Quasi-bidirectional output DIP-16 I/O Expanders ROHS.

PCBKit's library has its KiCad symbol (Interface_Expansion:PCF8574P, from KiCad's library) and its footprint (Package_DIP:DIP-16_W7.62mm, from KiCad's library), ready for a KiCad board. 1,012 are in stock at JLCPCB (part C398073). 9 open-source boards in 8 repositories on GitHub use it.

Symbol

1A02A13A24P05P16P27P38GND9P410P511P612P713INT14SCL15SDA16VDD
Interface_Expansion:PCF8574PFrom KiCad's library

Footprint

12345678910111213141516
Package_DIP:DIP-16_W7.62mmFrom KiCad's library

Pinout

16
The pins of the PCF8574P
PinNameType
1A0Input
2A1Input
3A2Input
4P0Input/output
5P1Input/output
6P2Input/output
7P3Input/output
8GNDPower in
9P4Input/output
10P5Input/output
11P6Input/output
12P7Input/output
13INTOpen collector
14SCLInput
15SDAInput/output
16VDDPower in

Open-source boards using it

9See all 9
  • 2 layers304.6 × 105.7 mmMPPT Booster 4kW Hardware, the printed circuit board in 3D

    MPPT Booster 4kW Hardware

    HNadeemTahir/AI_Inverter_Project

    NgSpice Digital Twin of a complete off-grid solar power system: H-Bridge inverter (220V/50Hz, PI control, electro-thermal IGBT modeling) and 4kW MPPT boost converter (UC3843 analog control, KCL summing node, gate drive…

    115 parts5
  • 2 layers80.3 × 58.8 mmAtapiduino, the printed circuit board in 3D

    Atapiduino

    nthpulse/atapiduino_pcb

    PCB for Carlos Durandal's Atapiduino project

    14 parts1
  • 2 layers70 × 133.5 mmSunCommander RelayModule, the printed circuit board in 3D

    SunCommander RelayModule

    m47eus2/SunCommander-PCB

    PCB boards for energy optimalization device. Contactors control for power switching with full optical isolation. Multiple current measurments made with current transformers.

    77 parts
  • 2 layers50 × 37 mmAnzeige Simon, the printed circuit board in 3D

    Anzeige Simon

    makerspace-wi/SimonProject

    ESP32-basierte Steuerung fuer Fallblattanzeigen (MAN/Krone/Vossloh) mit: - WiFi Access Point - Weboberflaeche/HTTP-API - Serieller Ausgabe im Krone-Protokoll - I2C-Transfer von Byte-Werten an 3 Slave-Adressen (ADTrans)

    25 parts
  • 2 layers130 × 62 mmESC SERVO KRS, the printed circuit board in 3D

    ESC SERVO KRS

    PriX-Y/UTL-Pad---Ulimated-Macro-pad

    i made this macro with with Statis - HackClub

    30 parts
  • 2 layersHouse midget, the printed circuit board in 3D

    House midget

    Sharoun-Madoya/home_midget

    167 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the PCF8574P?

Yes. The symbol is Interface_Expansion:PCF8574P and the footprint Package_DIP:DIP-16_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the PCF8574P?

DIP-16, with 16 pins. Its footprint is drawn on this page.

Where is the PCF8574P datasheet?

HGSEMI publishes it: the Datasheet link on this page opens it.

Where can I order the PCF8574P?

JLCPCB lists it as part C398073, with 1,012 in stock; the sellers' links on this page open their listings.

What can replace the PCF8574P?

Parts like it in the library: the PCF8574AP by HGSEMI, the PCF8574T/3,518 by NXP Semiconductors, the PCF8574APWR by Texas Instruments and the PCF8574T/TR by HGSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the PCF8574P?

9 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.