Skip to the content
PCBKitNew board
SS110 on a board, in 3D

SS110

GOODWORK

-65℃~+150℃ 100V 1A 200uA 30A 850mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHS

Extended
DatasheetJLCPCBLCSCgoodwork/SS110
Category
Schottky Diodes
Package
SMA(DO-214AC)
Pins
2

Overview

The SS110 is a schottky Diode made by GOODWORK in a SMA(DO-214AC) package with 2 pins. -65℃~+150℃ 100V 1A 200uA 30A 850mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHS.

PCBKit's library has its KiCad symbol (Diode:SS110, from KiCad's library) and its footprint (Diode_SMD:D_SMA, from KiCad's library), ready for a KiCad board. 176,118 are in stock at JLCPCB (part C2848680). 26 open-source boards in 20 repositories on GitHub use it.

Symbol

Diode:SS110From KiCad's library

Footprint

12
Diode_SMD:D_SMAFrom KiCad's library

From the datasheet

5
Reverse voltage, most
100 V · Maximum recurrent peak reverse voltage · p. 1
Forward current, most
1 A · Maximum average forward rectified current · p. 1
Forward voltage
850 mV · Maximum instantaneous forward voltage at 1.0 A · p. 1
Junction to air (SMA)
50 K/W · Typical junction to ambient thermal resistance · p. 1
Junction, hottest
150 °C · Maximum operating junction temperature · p. 1

What it is and has

5
Surface mount
Ideal for surface mount applications · p. 1
Strain relief
Built-in · p. 1
Case
Molded plastic · p. 1
Epoxy
UL 94V-0 rate flame retardant · p. 1
Polarity marking
Color band denotes cathode end · p. 1

Specifications

12
ParameterConditionsAs printedPage
Maximum Recurrent Peak Reverse VoltageSS110; 25 C ambient unless otherwise specifiedmax 100 V1
Maximum RMS VoltageSS110; 25 C ambient unless otherwise specifiedmax 70 V1
Maximum DC Blocking VoltageSS110; 25 C ambient unless otherwise specifiedmax 100 V1
Maximum Average Forward Rectified CurrentSS110; 25 C ambient; single phase half wave, 60Hz, resistive or inductive load; for capacitive load, derate current by 20%max 1 A1
Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method)SS110; 25 C ambientmax 30 A1
Maximum Instantaneous Forward Voltage at 1.0ASS110; 1.0A; 25 C ambientmax 0.85 V1
Maximum DC Reverse Current at Rated DC Blocking VoltageSS110; Ta=25 C; rated DC blocking voltagemax 0.2 mA1
Maximum DC Reverse Current at Rated DC Blocking VoltageSS110; Ta=100 C; rated DC blocking voltagemax 10 mA1
Typical Junction Capacitance (Note1)SS110; measured at 1MHz and applied reverse voltage of 4.0V D.C.typ 110 pF1
Typical Thermal Resistance RqJA (Note 2) RqJASS110; SMA; junction to ambienttyp 50 C/W1
Operating Temperature Range TJ TJSS110min -65 · max 150 C1
Storage Temperature Range TSTG TSTGSS110min -65 · max 150 C1

Parameters

10
Current - Rectified
1A
Diode Configuration
Standalone
Junction Temperature(Max)
150℃
Non-Repetitive Peak Forward Surge Current
30A
Operating Junction Temperature Range
-65℃~+150℃
Reverse Leakage Current (Ir)
200uA
Thermal Resistance(Junction to Ambient)
50℃/W
Voltage - DC Reverse(Vr)
100V
Voltage - Forward(Vf)
850mV
Voltage - Forward(Vf@If)
850mV@1A

Order codes

1

Pinout

2
The pins of the SS110
PinNameType
1KPassive
2APassive

Open-source boards using it

All 26
  • 2 layers150 × 50 mmEsp32-led smps, the printed circuit board in 3D

    Esp32-led smps

    lucysrausch/esp32-led-smps

    230V main LED smps. 2x30W Constant Current.

    179 parts30
  • 2 layers86.5 × 27.5 mmComfospot50 full, the printed circuit board in 3D

    Comfospot50 full

    cornim/comfospot50

    The schematic and PCB in this directory are the project-authored controller board design. The board is intended to interface an ESP32-C3 with the existing ComfoSpot panel.

    29 parts4GPL-3.0
  • 4 layers82 × 60 mmP1 tx, the printed circuit board in 3D

    P1 tx

    Deco025/resonare

    Resonare: open-source 120 W LCC-S resonant wireless charger, transmitter and receiver boards (KiCad 10, 4-layer)

    92 parts4CERN-OHL-S-2.0
  • 2 layers45.7 × 60.2 mmPcb watch, the printed circuit board in 3D

    Pcb watch

    nithinmathewjoji/Schrodinger-Clock-PCB-Watch-

    An open-source ESP32-S3-based smartwatch with RTC, I2C display, buzzer, LEDs, and battery monitoring. Designed using KiCad, it features a compact PCB layout, Li-Po battery support, and USB charging

    58 parts4MIT
  • 4 layers100 × 80 mmChatgpt astra test2, the printed circuit board in 3D

    Chatgpt astra test2

    fredriknk/chatgpt_astra_test2

    Completely vibe coded ESP32 4-20ma input/output module

    97 parts3MIT
  • 4 layers190 × 145 mmMotor izleme karti, the printed circuit board in 3D

    Motor izleme karti

    melikeatilgan/asenkron-motor-bakim

    15 kW asenkron motor için arıza ağacı analizi, aylık bakım formu ve KiCad'de tasarlanmış üç izleme kartı

    191 parts1
  • 4 layers26.5 × 41.3 mmSpeed controller, the printed circuit board in 3D

    Speed controller

    AnthMendoza/ActuatorSpeedController

    Vesc based speed controller with custom hardware for an integrated PCB into a robotic actuator

    75 parts
  • 4 layers170 × 74.5 mmSupply power, the printed circuit board in 3D

    Supply power

    GarryBGoode/VibeSupply

    USB PD based powersupply developed on vibes (claude)

    253 parts

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/goodwork/SS110" title="SS110 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/goodwork/SS110.jpg" alt="SS110" width="1200" height="900">
A picture that opens the part, for a README
[![SS110](https://pcbkit.io/embed/parts/goodwork/SS110.jpg?size=s)](https://pcbkit.io/parts/goodwork/SS110)

Questions

Is there a KiCad symbol and footprint for the SS110?

Yes. The symbol is Diode:SS110 and the footprint Diode_SMD:D_SMA, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SS110?

SMA(DO-214AC), with 2 pins. Its footprint is drawn on this page.

Where is the SS110 datasheet?

GOODWORK publishes it: the Datasheet link on this page opens it.

Where can I order the SS110?

JLCPCB lists it as part C2848680, with 176,118 in stock; the sellers' links on this page open their listings.

What can replace the SS110?

Parts like it in the library: the SS210 by MDD, the SS310 by hongjiacheng, the SS310 by MDD and the SS510 by MDD. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SS110?

26 boards in 20 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8