2 layers35 × 75 mm
IntUsbPwmFanController
penguineer/IntUsbPwmFanController
Controller for PWM-based fans using the internal USB 2.0 header
57 partsCC-BY-SA-4.0
FT260S-R
FTDIExtended
1.62V~1.98V、2.25V~2.75V、2.97V~3.63V、4.5V~5.5V 2 64Byte Internal Oscillator、With automatic flow control、Low-power mode、Hardware flow control support、Software flow control support TSSOP-28 UART ROHS
- Part id
- ftdi/FT260S-R
- Category
- UART
- Package
- TSSOP-28
- Pins
- 28
- In stock
- 30 at JLCPCB (C3313267)
- Used on
- 1 open-source board
Overview
The FT260S-R is an UART made by FTDI in a TSSOP-28 package with 28 pins. 1.62V~1.98V、2.25V~2.75V、2.97V~3.63V、4.5V~5.5V 2 64Byte Internal Oscillator、With automatic flow control、Low-power mode、Hardware flow control support、Software flow control support TSSOP-28 UART ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:FT260S-R, from EasyEDA) and its footprint (Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm, from KiCad's library), ready for a KiCad board. 30 are in stock at JLCPCB (part C3313267). 1 open-source board in 1 repository on GitHub use it.
Symbol
Footprint
Pinout
28| Pin | Name | Type |
|---|---|---|
| 1 | FSOURCE | Unspecified |
| 2 | VBUS_DET | Unspecified |
| 3 | DIO12(BCD_DET/RX_LED/PWREN_N/GPIOG) | Unspecified |
| 4 | DIO13(GPIOH/DSRN) | Unspecified |
| 5 | DEBUGGER | Unspecified |
| 6 | STEST_RSTN | Unspecified |
| 7 | RESETN | Unspecified |
| 8 | DCNF0 | Unspecified |
| 9 | DCNF1 | Unspecified |
| 10 | VCCIO | Unspecified |
| 11 | DIO0(TX_ACTIVE/TX_LED/GPIOA) | Unspecified |
| 12 | DIO1(GPIOB/RTSN) | Unspecified |
| 13 | DIO2(GPIOE/CTSN) | Unspecified |
| 14 | DIO3(RXD/GPIOC) | Unspecified |
| 15 | DIO4(TXD/GPIOD) | Unspecified |
| 16 | DIO5(SCL/GPIO0) | Unspecified |
| 17 | DIO6(SDA/GPIO1) | Unspecified |
| 18 | DIO7(SUSPOUT_N/PWREN_N/GPIO2) | Unspecified |
| 19 | DIO8(INTRIN/WAKEUP/GPIO3) | Unspecified |
| 20 | DIO9(GPIOF/DTRN) | Unspecified |
| 21 | DIO10(GPIO4/DCD) | Unspecified |
| 22 | DIO11(GPIO5/RI) | Unspecified |
| 23 | GND | Unspecified |
| 24 | DM | Unspecified |
| 25 | DP | Unspecified |
| 26 | VOUT3V3 | Unspecified |
| 27 | VCCIN | Unspecified |
| 28 | AGND | Unspecified |
Open-source boards using it
1Parts like it
5
PI7C9X1172CLE
TSSOP-28UARTDiodes IncorporatedPI7C9X1172CLEX
TSSOP-281.62V~3.63V UART TSSOP-28 UART ROHSDiodes IncorporatedUARTPI7C9X762CLE
TSSOP-281.8V、2.5V、3.3V UART TSSOP-28 UART ROHSDiodes IncorporatedUARTPI7C9X762CLEX
TSSOP-28UARTDiodes IncorporatedXR20M1172IG28TR-F
TSSOP-28-40℃~+85℃ 1.62V~3.63V 16Mbps 2 64Byte With automatic flow control、Full-Featured Modem Interface、Low-power mode、Hardware flow control support、Software flow control support、Fractional baud rate generator、Internal loopback/self-test mode、Automatic RS-485 direction control TSSOP-28 UART ROHSMaxLinearUART
Questions
Is there a KiCad symbol and footprint for the FT260S-R?
Yes. The symbol is EasyEDA_Cloud:FT260S-R and the footprint Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the FT260S-R?
TSSOP-28, with 28 pins. Its footprint is drawn on this page.
Where is the FT260S-R datasheet?
FTDI publishes it: the Datasheet link on this page opens it.
Where can I order the FT260S-R?
JLCPCB lists it as part C3313267, with 30 in stock; the sellers' links on this page open their listings.
What can replace the FT260S-R?
Parts like it in the library: the PI7C9X1172CLE by Diodes Incorporated, the PI7C9X1172CLEX by Diodes Incorporated, the PI7C9X762CLE by Diodes Incorporated and the PI7C9X762CLEX by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the FT260S-R?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.