Overview
The PI7C9X762CLE is an UART made by Diodes Incorporated in a TSSOP-28 package with 28 pins. 1.8V、2.5V、3.3V UART TSSOP-28 UART ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:PI7C9X762CLEX, from EasyEDA) and its footprint (Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C1550617).
Symbol
Footprint
Pinout
28| Pin | Name | Type |
|---|---|---|
| 1 | RTSA# | Unspecified |
| 2 | CTSA# | Unspecified |
| 3 | TXA | Unspecified |
| 4 | RXA | Unspecified |
| 5 | RESET# | Unspecified |
| 6 | XTAL1 | Unspecified |
| 7 | XTAL2 | Unspecified |
| 8 | VDD | Unspecified |
| 9 | I2C/SPI# | Unspecified |
| 10 | CS#/A0 | Unspecified |
| 11 | SI/A1 | Unspecified |
| 12 | SO | Unspecified |
| 13 | SCL/SCLK | Unspecified |
| 14 | SDA | Unspecified |
| 15 | IRQ# | Unspecified |
| 16 | CTSB# | Unspecified |
| 17 | RTSB# | Unspecified |
| 18 | GPIO0/DSRB# | Unspecified |
| 19 | GPIO1/DTRB# | Unspecified |
| 20 | GPIO2/CDB# | Unspecified |
| 21 | GPIO3/RIB# | Unspecified |
| 22 | VSS | Unspecified |
| 23 | TXB | Unspecified |
| 24 | RXB | Unspecified |
| 25 | GPIO4/DSRA# | Unspecified |
| 26 | GPIO5/DTRA# | Unspecified |
| 27 | GPIO6/CDA# | Unspecified |
| 28 | GPIO7/RIA# | Unspecified |
Parts like it
5FT260S-R
TSSOP-281.62V~1.98V、2.25V~2.75V、2.97V~3.63V、4.5V~5.5V 2 64Byte Internal Oscillator、With automatic flow control、Low-power mode、Hardware flow control support、Software flow control support TSSOP-28 UART ROHSFTDIUARTPI7C9X1172CLE
TSSOP-28UARTDiodes IncorporatedPI7C9X1172CLEX
TSSOP-281.62V~3.63V UART TSSOP-28 UART ROHSDiodes IncorporatedUARTPI7C9X762CLEX
TSSOP-28UARTDiodes IncorporatedXR20M1172IG28TR-F
TSSOP-28-40℃~+85℃ 1.62V~3.63V 16Mbps 2 64Byte With automatic flow control、Full-Featured Modem Interface、Low-power mode、Hardware flow control support、Software flow control support、Fractional baud rate generator、Internal loopback/self-test mode、Automatic RS-485 direction control TSSOP-28 UART ROHSMaxLinearUART
Questions
Is there a KiCad symbol and footprint for the PI7C9X762CLE?
Yes. The symbol is EasyEDA_Cloud:PI7C9X762CLEX and the footprint Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the PI7C9X762CLE?
TSSOP-28, with 28 pins. Its footprint is drawn on this page.
Where is the PI7C9X762CLE datasheet?
Diodes Incorporated publishes it: the Datasheet link on this page opens it.
Where can I order the PI7C9X762CLE?
JLCPCB lists it as part C1550617, with 0 in stock; the sellers' links on this page open their listings.
What can replace the PI7C9X762CLE?
Parts like it in the library: the FT260S-R by FTDI, the PI7C9X1172CLE by Diodes Incorporated, the PI7C9X1172CLEX by Diodes Incorporated and the PI7C9X762CLEX by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.