Skip to the content
1234

EL817-S1

Everlight ElectronicsExtended

SMD-4 New Arrivals ROHS

Part id
everlight/EL817-S1
Category
Uncategorised
Package
SMD-4
Pins
4
In stock
0 at JLCPCB (C19271905)
Used on
5 open-source boards

Overview

The EL817-S1 is an uncategorised made by Everlight Electronics in a SMD-4 package with 4 pins. SMD-4 New Arrivals ROHS.

PCBKit's library has its KiCad symbol (Isolator:EL817, from KiCad's library) and its footprint (Package_DIP:DIP-4_W7.62mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C19271905). 5 open-source boards in 4 repositories on GitHub use it.

Symbol

1234
Isolator:EL817From KiCad's library

Footprint

1234
Package_DIP:DIP-4_W7.62mmFrom KiCad's library

Pinout

4
The pins of the EL817-S1
PinNameType
1—Passive
2—Passive
3—Passive
4—Passive

Open-source boards using it

5
  • 2 layers67 × 54.5 mmUblink, the printed circuit board in 3D

    Ublink

    koraa/ublink

    PWM control for high power LEDs

    61 parts1
  • 2 layers80 × 100 mmPir, the printed circuit board in 3D

    Pir

    buha/pir-trigger

    Camera trigger using PIR sensor

    137 partsGPL-3.0
  • 2 layers75 × 64 mmESP24V HA XIAO, the printed circuit board in 3D

    ESP24V HA XIAO

    Traxes/dimplex-zl400-esphome

    ESPHome controller for Dimplex ZL 300/400 VF ventilation units – isolated 24 V I/O, XIAO ESP32-C6, KiCad PCB, 3D-printed case. | ESPHome-Steuerung für Dimplex-Lüftungsgeräte ZL 300/400 VF mit Home Assistant.

    47 partsMIT
  • 2 layers60.5 × 65.5 mmBloX ABC MkII, the printed circuit board in 3D

    BloX ABC MkII

    bask185/Train-Science-DIY

    69 parts3
  • 2 layers64 × 45.5 mmBloX MkII, the printed circuit board in 3D

    BloX MkII

    bask185/Train-Science-DIY

    48 parts3

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the EL817-S1?

Yes. The symbol is Isolator:EL817 and the footprint Package_DIP:DIP-4_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the EL817-S1?

SMD-4, with 4 pins. Its footprint is drawn on this page.

Where can I order the EL817-S1?

JLCPCB lists it as part C19271905, with 0 in stock; the sellers' links on this page open their listings.

What can replace the EL817-S1?

Parts like it in the library: the TLP785(D4GHTR6,F by Toshiba, the PC817SA by Galaxy Microelectronics, the PC817SC by Galaxy Microelectronics and the PC817C by XCH. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the EL817-S1?

5 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.