Skip to the content
49

ESP32-D0WD

Espressif SystemsExtended

-40℃~+125℃ -98dBm 130mA 150Mbps 2.3V~3.6V 2.412GHz~2.484GHz 2.4GHz 20dBm 95mA Bluetooth、WiFi SPI、UART、ADC、I2C、I2S、PWM、SDIO Supports FEC function、CRC check function、DMA function transceiver QFN-48-EP(5x5) RF Transceiver ICs ROHS

Part id
espressif/ESP32-D0WD
Category
RF Transceiver ICs
Package
QFN-48-EP(5x5)
Pins
49
In stock
0 at JLCPCB (C130167)
Used on
7 open-source boards

Overview

The ESP32-D0WD is a RF Transceiver IC made by Espressif Systems in a QFN-48-EP(5x5) package with 49 pins. -40℃~+125℃ -98dBm 130mA 150Mbps 2.3V~3.6V 2.412GHz~2.484GHz 2.4GHz 20dBm 95mA Bluetooth、WiFi SPI、UART、ADC、I2C、I2S、PWM、SDIO Supports FEC function、CRC check function、DMA function transceiver QFN-48-EP(5x5) RF Transceiver ICs ROHS.

PCBKit's library has its KiCad symbol (Espressif:ESP32, from Espressif) and its footprint (EasyEDA_Cloud:QFN-48_L5.0-W5.0-P0.35-BL-EP3.7, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C130167). 7 open-source boards in 7 repositories on GitHub use it.

Symbol

1VDDA2LNA_IN3VDD3P35SENSOR_VP/GPIO36/ADC1_CH06SENSOR_CAPP/GPIO37/ADC1_CH17SENSOR_CAPN/GPIO38/ADC1_CH28SENSOR_VN/GPIO39/ADC1_CH39CHIP_PU10VDET_1/GPIO34/ADC1_CH611VDET_2/GPIO35/ADC1_CH71232K_XP/GPIO32/ADC1_CH41332K_XN/GPIO33/ADC1_CH514GPIO25/ADC2_CH8/DAC_115GPIO26/ADC2_CH9/DAC_216GPIO27/ADC2_CH717MTMS/GPIO14/ADC2_CH618MTDI/GPIO12/ADC2_CH519VDD3P3_RTC20MTCK/GPIO13/ADC2_CH421MTDO/GPIO15/ADC2_CH322GPIO2/ADC2_CH223GPIO0/BOOT/ADC2_CH124GPIO4/ADC2_CH025GPIO1626VDD_SDIO27GPIO1728SD_DATA_2/GPIO929SD_DATA_3/GPIO1030SD_CMD/GPIO1131SD_CLK/GPIO632SD_DATA_0/GPIO733SD_DATA_1/GPIO834GPIO535GPIO1836GPIO2337VDD3P3_CPU38GPIO1939GPIO2240U0RXD/GPIO341U0TXD/GPIO142GPIO2144XTAL_N45XTAL_P47CAP248CAP149GND
Espressif:ESP32From Espressif

Footprint

49
EasyEDA_Cloud:QFN-48_L5.0-W5.0-P0.35-BL-EP3.7From EasyEDA

From the datasheet

11
Supply, least
2.3 V · VDDA, VDD3P3_RTC, VDD3P3, VDD_SDIO (3.3 V mode), recommended operating, min · p. 40
Supply, most
3.6 V · VDDA, VDD3P3_RTC, VDD3P3, VDD_SDIO (3.3 V mode), recommended operating, max · p. 40
Supply, least
1.8 V · VDD3P3_CPU, recommended operating, min · p. 40
Supply, most
3.6 V · VDD3P3_CPU, recommended operating, max · p. 40
Supply, absolute maximum
3.6 V · VDDA, VDD3P3, VDD3P3_RTC, VDD3P3_CPU, VDD_SDIO, absolute max · p. 40
Works from
-40 °C · Operating ambient temperature, min · p. 40
Works up to
125 °C · Operating ambient temperature, max · p. 40
Takes working
100 mA · Wi-Fi receive, 3.3 V, 25 °C, upper end of typical range · p. 42
Takes at most
240 mA · 802.11b transmit, +19.5 dBm, 50% duty cycle, 3.3 V, 25 °C, typical · p. 42
Takes asleep
10 µA · Deep-sleep, RTC timer and RTC memory, typical · p. 28
A pin gives at most
40 mA · VDD3P3_CPU GPIO source, maximum drive strength, VDD = 3.3 V, VOH >= 2.64 V, typical · p. 41

Open-source boards using it

7
  • 4 layers29.5 × 64.5 mmIot esp eth ind, the printed circuit board in 3D

    Iot esp eth ind

    wayri/SPIKE

    PCB-focused multiphysics simulation, from board to complete assembly: PI, SI, circuits, thermal, EM/RF and mechanical workflows, with MCAD collaboration and a roadmap toward large-scale coupled assemblies.

    150 parts17
  • 4 layers40 × 17.6 mmNk LoRa, the printed circuit board in 3D

    Nk LoRa

    Nitrokey/nitrokey-lora-hardware

    93 parts2
  • 2 layersSih, the printed circuit board in 3D

    Sih

    Faulty404/SLD_Pen-Pad

    The circuit uses an LM358 op-amp to amplify signals from a microphone and includes battery charging capabilities using the TP4057 charger IC.

    37 parts
  • 2 layers103 × 55.5 mmBoite hp, the printed circuit board in 3D

    Boite hp

    Jzn-wbr/Starter

    Un système de réveil connecté qui combine une station audio, un bracelet de mouvement et une application mobile pour transformer le réveil en un vrai départ de journée.

    27 parts
  • 4 layersSwarmBot, the printed circuit board in 3D

    SwarmBot

    keionbis/Vision-Robot-Electronics

    81 parts
  • 4 layers130 × 65 mmMyConsole, the printed circuit board in 3D

    MyConsole

    krishecejee1008-creator/MiKrida-PCB

    81 parts

Parts like it

3

Questions

Is there a KiCad symbol and footprint for the ESP32-D0WD?

Yes. The symbol is Espressif:ESP32 and the footprint EasyEDA_Cloud:QFN-48_L5.0-W5.0-P0.35-BL-EP3.7, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ESP32-D0WD?

QFN-48-EP(5x5), with 49 pins. Its footprint is drawn on this page.

Where is the ESP32-D0WD datasheet?

Espressif Systems publishes it: the Datasheet link on this page opens it.

Where can I order the ESP32-D0WD?

JLCPCB lists it as part C130167, with 0 in stock; the sellers' links on this page open their listings.

What can replace the ESP32-D0WD?

Parts like it in the library: the ESP32-D0WD-V3 by Espressif Systems, the ESP32-D0WDR2-V3 by Espressif Systems and the ESP32-S0WD by Espressif Systems. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ESP32-D0WD?

7 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.