Skip to the content
12345678910111213141516

PAM8403DR-H

Diodes IncorporatedExtended

-40℃~+85℃ -59dB、-58dB 0.11%、0.15% 2-Channel 2.8V~5.5V 3Wx2@4Ω 80dB 83%、87% 8mA、10mA、16mA Automatic mute/no-noise switch、Enable/shutdown function、Filterless architecture Class D SOIC-16 Audio Amplifiers ROHS

Part id
diodes/PAM8403DR-H
Category
Audio Amplifiers
Package
SOIC-16
Pins
16
In stock
3,521 at JLCPCB (C17337)
Used on
1 open-source board

Overview

The PAM8403DR-H is an audio Amplifier made by Diodes Incorporated in a SOIC-16 package with 16 pins. -40℃~+85℃ -59dB、-58dB 0.11%、0.15% 2-Channel 2.8V~5.5V 3Wx2@4Ω 80dB 83%、87% 8mA、10mA、16mA Automatic mute/no-noise switch、Enable/shutdown function、Filterless architecture Class D SOIC-16 Audio Amplifiers ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Audio:PAM8403D, from KiCad's library) and its footprint (Package_SO:SOIC-16_3.9x9.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 3,521 are in stock at JLCPCB (part C17337). 1 open-source board in 1 repository on GitHub use it.

Symbol

1LOUT+2PGND3LOUT-4PVDD5MUTE6VDD7INL8VREF10INR11GND12SHDN14ROUT-16ROUT+
Amplifier_Audio:PAM8403DFrom KiCad's library

Footprint

12345678910111213141516
Package_SO:SOIC-16_3.9x9.9mm_P1.27mmFrom KiCad's library

From the datasheet

9
Supply, least
2.5 V · VDD, recommended operating min · p. 3
Supply, most
5.5 V · VDD, recommended operating max · p. 3
Supply, absolute maximum
6 V · Supply voltage absolute max · p. 3
Works from
-40 °C · Operating ambient min · p. 3
Works up to
85 °C · Operating ambient max · p. 3
Junction, hottest
150 °C · Junction temperature absolute max · p. 3
Takes working
16 mA · VDD quiescent current typical, 5.0 V, no load · p. 4
Junction to air (SOP-16)
110 K/W · Junction to ambient max · p. 3
Junction to case (SOP-16)
23 K/W · Junction to case max · p. 3

What it is and has

7
Amplifier architecture
Filterless 3W class-D stereo audio amplifier · p. 1
Output power
3W at 10% THD, 4Ω load, 5V supply · p. 1
Efficiency
Up to 90% · p. 1
Protection
Short circuit protection · p. 1
Protection
Thermal shutdown · p. 1
Package
SOP-16 · p. 1
Package compliance
Pb-Free · p. 1

Around it

4
cap 1.0μF
between VDD and GND; Low ESR ceramic supply decoupling; place as close as possible to VDD. · p. 8
cap 20μF or greater
between Supply and GND; Ceramic capacitor for lower frequency supply noise; place near the audio power amplifier. · p. 8
cap 0.47μF to 1.0μF
between VREF and GND; Ceramic analog reference bypass capacitor for best THD and noise performance. · p. 8
cap 1000µF
between Supply and GND; Additional capacitor at the power supply terminal for power line coupling when amplifier-to-speaker traces are shorter than 20cm. · p. 9

Specifications

53
ParameterConditionsAs printedPage
Supply VoltageTA = +25°C; voltages with respect to groundmax 6 V3
Input VoltageTA = +25°C; upper limit VDD +0.3Vmin -0.3 V3
Operation Temperature Rangemin -40 · max 85 °C3
Maximum Junction Temperaturemax 150 °C3
Operation Junction Temperaturemin -40 · max 125 °C3
Storage Temperaturemin -65 · max 150 °C3
Soldering Temperature5 secmax 300 °C3
Supply Voltage RangeTA = +25°Cmin 2.5 · max 5.5 V3
Operation Temperature Rangemin -40 · max 85 °C3
Junction Temperature Rangemin -40 · max 125 °C3
Thermal Resistance (Junction to Ambient) θJASOP-16max 110 °C/W3
Thermal Resistance (Junction to Case) θJCSOP-16max 23 °C/W3
Supply Voltage VDDTA = +25°Cmin 2.5 · max 5.5 V4
Output Power POTHD+N = 10%, f = 1KHz, RL = 4Ω, VDD = 5.0Vtyp 3.2 W4
Output Power POTHD+N = 10%, f = 1KHz, RL = 4Ω, VDD = 3.6Vtyp 1.6 W4
Output Power POTHD+N = 10%, f = 1KHz, RL = 4Ω, VDD = 3.2Vtyp 1.3 W4
Output Power POTHD+N = 1%, f = 1KHz, RL = 4Ω, VDD = 5.0Vtyp 2.5 W4
Output Power POTHD+N = 1%, f = 1KHz, RL = 4Ω, VDD = 3.6Vtyp 1.3 W4
Output Power POTHD+N = 1%, f = 1KHz, RL = 4Ω, VDD = 3.2Vtyp 0.85 W4
Output Power POTHD+N = 10%, f = 1KHz, RL = 8Ω, VDD = 5.0Vtyp 1.8 W4
Output Power POTHD+N = 10%, f = 1KHz, RL = 8Ω, VDD = 3.6Vtyp 0.9 W4
Output Power POTHD+N = 10%, f = 1KHz, RL = 8Ω, VDD = 3.2Vtyp 0.6 W4
Output Power POTHD+N = 1%, f = 1KHz, RL = 8Ω, VDD = 5.0Vtyp 1.4 W4
Output Power POTHD+N = 1%, f = 1KHz, RL = 8Ω, VDD = 3.6Vtyp 0.72 W4
Output Power POTHD+N = 1%, f = 1KHz, RL = 8Ω, VDD = 3.2Vtyp 0.45 W4
Total Harmonic Distortion Plus Noise THD+NVDD = 5.0V, PO = 1W, RL = 8Ω, f = 1kHztyp 0.15 %4
Total Harmonic Distortion Plus Noise THD+NVDD = 3.6V, PO = 0.1W, RL = 8Ω, f = 1kHztyp 0.11 %4
Total Harmonic Distortion Plus Noise THD+NVDD = 5.0V, PO = 0.5W, RL = 4Ω, f = 1kHztyp 0.15 %4
Total Harmonic Distortion Plus Noise THD+NVDD = 3.6V, PO = 0.2W, RL = 4Ω, f = 1kHztyp 0.11 %4
Closed Loop Gain GVVDD = 3V to 5Vtyp 24 dB4
Power Supply Ripple Rejection PSRRVDD = 5.0V, Inputs AC-Grounded with CIN = 0.47uF, f = 100Hztyp -59 dB4
Power Supply Ripple Rejection PSRRVDD = 5.0V, Inputs AC-Grounded with CIN = 0.47uF, f = 1kHztyp -58 dB4
Crosstalk CSVDD = 5.0V, PO = 0.5W, RL = 8Ω, GV = 20db, f = 1kHztyp -95 dB4
Signal-to-Noise Ratio SNRVDD = 5.0V, VORMS = 1V, GV = 20db, f = 1kHztyp 80 dB4
Output Noise VNVDD = 5.0V, Inputs AC-Grounded with CIN = 0.47uF, No A-Weightingtyp 100 uV4
Output Noise VNVDD = 5.0V, Inputs AC-Grounded with CIN = 0.47uF, A-Weightingtyp 150 uV4
Dynamic Range DynVDD = 5.0V, THD = 1%, f = 1kHztyp 90 dB4
Efficiency ηVDD = 5V, RL = 8Ω, THD = 10%, f = 1kHztyp 87 %4
Efficiency ηVDD = 5V, RL = 4Ω, THD = 10%, f = 1kHztyp 83 %4
Quiescent Current IQVDD = 5.0V, No Loadtyp 16 mA4
Quiescent Current IQVDD = 3.6V, No Loadtyp 10 mA4
Quiescent Current IQVDD = 3.0V, No Loadtyp 8 mA4
Muting Current IMUTEVDD = 5.0V, VMUTE = 0.3Vtyp 3.5 mA4
Static Drain-to-Source On-State Resistor RDS(ON)IDS = 500mA, VGS = 5V, PMOStyp 180 mΩ4
Static Drain-to-Source On-State Resistor RDS(ON)IDS = 500mA, VGS = 5V, NMOStyp 140 mΩ4
Switching Frequency fSWVDD = 3.0V to 5.0Vtyp 260 kHz4
Output Offset Voltage VOSVIN = 0V, VDD = 5.0Vtyp 10 mV4
Enable Input High Voltage VIHVDD = 5.0Vmin 1.5 · typ 1.4 V4
Enable Input Low Voltage VILVDD = 5.0Vtyp 0.7 · max 0.4 V4
MUTE Input High Voltage VIHVDD = 5.0Vmin 1.5 · typ 1.4 V4
MUTE Input Low Voltage VILVDD = 5.0Vtyp 0.7 · max 0.4 V4
Over Temperature Protection OTPNo Load, Junction Temperature, VDD = 5.0Vtyp 140 V4
Over Temperature Hysterisis OTHNo Load, Junction Temperature, VDD = 5.0Vtyp 30 V4

Pins, by the datasheet

16
1 +OUT_L
Left Channel Positive Output · p. 2
2 PGND
Power GND · p. 2
3 -OUT_L
Left Channel Negative Output · p. 2
4 PVDD
Power VDD · p. 2
5 MUTE
Mute Control Input (active low) · p. 2
6 VDD
Analog VDD · p. 2
7 INL
Left Channel Input · p. 2
8 VREF
Internal analog reference; connect a bypass capacitor from VREF to GND. · p. 2
9 NC
No connection. · p. 2
10 INR
Right Channel Input · p. 2
11 GND
Analog GND · p. 2
12 SHND
Shutdown Control Input (active low) · p. 2
13 PVDD
Power VDD · p. 2
14 -OUT_R
Right Channel Negative Output · p. 2
15 PGND
Power GND · p. 2
16 +OUT_R
Right Channel Positive Output · p. 2

Ordering codes, by the datasheet

1
PAM8403DR
SOP-16 · 2500 Units/Tape&Reel · p. 9

Open-source boards using it

1
  • 2 layers137.7 × 134.7 mmChord board, the printed circuit board in 3D

    Chord board

    Yoda-Flash/chord-board

    A MIDI controller to experiment with chords, with all sorts of customization!

    90 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the PAM8403DR-H?

Yes. The symbol is Amplifier_Audio:PAM8403D and the footprint Package_SO:SOIC-16_3.9x9.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the PAM8403DR-H?

SOIC-16, with 16 pins. Its footprint is drawn on this page.

Where is the PAM8403DR-H datasheet?

Diodes Incorporated publishes it: the Datasheet link on this page opens it.

Where can I order the PAM8403DR-H?

JLCPCB lists it as part C17337, with 3,521 in stock; the sellers' links on this page open their listings.

What can replace the PAM8403DR-H?

Parts like it in the library: the PAM8406DR by Diodes Incorporated, the IRS2092STRPBF by Infineon Technologies, the IRS20957STRPBF by Infineon Technologies and the PAM8403 by Slkor. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the PAM8403DR-H?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.