Skip to the content
12

MMSZ5242B

Diodes IncorporatedExtended

-65℃~+150℃ 1 Independent 11.4V~12.6V 12V 1uA@9.1V 30Ω 370mW 600Ω SOD-123 Zener Diodes ROHS

Part id
diodes/MMSZ5242B
Category
Zener Diodes
Package
SOD-123
Pins
5
In stock
96,686 at JLCPCB (C500776)
Used on
4 open-source boards

Overview

The MMSZ5242B is a zener Diode made by Diodes Incorporated in a SOD-123 package with 2 pins. -65℃~+150℃ 1 Independent 11.4V~12.6V 12V 1uA@9.1V 30Ω 370mW 600Ω SOD-123 Zener Diodes ROHS.

PCBKit's library has its KiCad symbol (Device:D_Zener, from KiCad's library) and its footprint (Diode_SMD:D_SOD-123, from KiCad's library), ready for a KiCad board. 96,686 are in stock at JLCPCB (part C500776). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

Device:D_ZenerFrom KiCad's library

Footprint

12
Diode_SMD:D_SOD-123From KiCad's library

From the datasheet

3
Forward voltage
900 mV · max at IF = 10mA · p. 2
Junction, hottest
150 °C · maximum operating junction temperature · p. 2
Junction to air (SOD123)
338 K/W · junction to ambient air, FR-4 PCB with 1 inch copper pad layout · p. 2

What it is and has

2
Power dissipation
500mW · p. 1
Package
SOD123 · p. 1

Specifications

10
ParameterConditionsAs printedPage
Forward Voltage VFIF = 10mA; TA = +25°Cmax 0.9 V2
Power Dissipation PDTL = +75°C; Note 4: RΘJL = 132°C/Wmax 500 mW2
Power Dissipation PDTA = +25°C; device mounted on FR-4 PCB with 1 inch copper pad layoutmax 370 mW2
Thermal Resistance, Junction to Ambient Air RθJASOD123; device mounted on FR-4 PCB with 1 inch copper pad layoutmax 338 °C/W2
Operating and Storage Temperature Range TJ, TSTGmin -65 · max 150 °C2
Zener Voltage Range VZMMSZ5242B; IZT = 20mA; TA = +25°C; 12V nominal; short duration pulse testmin 11.4 · max 12.6 V2
Test Current IZTMMSZ5242B; TA = +25°Ctyp 20 mA2
Maximum Zener Impedance ZZTMMSZ5242B; IZT = 20mA; f = 1KHz; TA = +25°Cmax 30 Ω2
Maximum Zener Impedance ZZKMMSZ5242B; IZK = 0.25mA; f = 1KHz; TA = +25°Cmax 600 Ω2
Maximum Reverse Leakage Current IRMMSZ5242B; VR = 9.1V; TA = +25°C; short duration pulse testmax 1 A2

Open-source boards using it

4
  • 2 layers80 × 50 mmOpen PSU Meter ESP32, the printed circuit board in 3D

    Open PSU Meter ESP32

    nitefood/opsum

    OPSUM - The Open PSU Meter project

    51 parts5MIT
  • 2 layers78.4 × 40 mmExpression pedal, the printed circuit board in 3D

    Expression pedal

    mod-audio/cc-hw-expression-pedal-LEGACY

    MOD Expression pedal hardware repository

    72 parts3
  • 2 layers46.5 × 32 mmHalf bridge load cells board, the printed circuit board in 3D

    Half bridge load cells board

    XuanTrace/half-bridge-load-cells-board

    Open-source half-bridge load cell PCB design featuring the HX710A/B/C ADC chip. Supports SMD with castellation (half-hole), pin headers, and XH2.45 4-pin connectors.

    46 parts1
  • 4 layers220 × 175 mmM68030-sbc, the printed circuit board in 3D

    M68030-sbc

    mattbettcher/m68030-sbc

    See 68030-design/spec.md for the design specification.

    279 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MMSZ5242B?

Yes. The symbol is Device:D_Zener and the footprint Diode_SMD:D_SOD-123, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MMSZ5242B?

SOD-123, with 2 pins. Its footprint is drawn on this page.

Where is the MMSZ5242B datasheet?

Diodes Incorporated publishes it: the Datasheet link on this page opens it.

Where can I order the MMSZ5242B?

JLCPCB lists it as part C500776, with 96,686 in stock; the sellers' links on this page open their listings.

What can replace the MMSZ5242B?

Parts like it in the library: the BZT52C12 by GOODWORK, the BZT52C12 by MDD, the BZT52C12 by Jiangsu Changjing Electronics Technology (CJ) and the BZT52B12 by hongjiacheng. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MMSZ5242B?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.