Skip to the content
1234

DMP3017SFG

Diodes IncorporatedExtended

-55℃~+150℃ 1 P-Channel 10mΩ@10V 11.5A 2.246nF 294pF 30V 352pF 3V 41nC@10V 940mW P-Channel ±25V PowerDI3333-8 MOSFETs ROHS

Part id
diodes/DMP3017SFG
Category
MOSFETs
Package
PowerDI3333-8
Pins
5
In stock
0 at JLCPCB (C461072)
Used on
8 open-source boards

Overview

The DMP3017SFG is a MOSFET made by Diodes Incorporated in a PowerDI3333-8 package with 5 pins. -55℃~+150℃ 1 P-Channel 10mΩ@10V 11.5A 2.246nF 294pF 30V 352pF 3V 41nC@10V 940mW P-Channel ±25V PowerDI3333-8 MOSFETs ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Q_PMOS_1S_2S_3S_4G_5D, from PCBKit's generic symbols) and its footprint (EasyEDA_Cloud:POWERDI3333-8_L3.3-W3.3-P0.65-BL, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C461072). 8 open-source boards in 7 repositories on GitHub use it.

Symbol

Pinmap_Generic:Q_PMOS_1S_2S_3S_4G_5DFrom PCBKit's generic symbols

Footprint

1234
EasyEDA_Cloud:POWERDI3333-8_L3.3-W3.3-P0.65-BLFrom EasyEDA

Pinout

5
The pins of the DMP3017SFG
PinNameType
1SPassive
2SPassive
3SPassive
4GInput
5DPassive

Open-source boards using it

8
  • 4 layers68.6 × 53.3 mmIcezum, the printed circuit board in 3D

    Icezum

    FPGAwars/icezum

    :star2: IceZUM Alhambra: an Arduino-like Open FPGA electronic board

    218 parts357GPL-3.0
  • 2 layers28 × 30 mmOtterIron Devkit, the printed circuit board in 3D

    OtterIron Devkit

    Jana-Marie/Otter-Iron-PRO

    USB-PD soldering station for JBC C245 handles.

    64 parts321
  • 4 layers76.2 × 15.2 mmUsb c, the printed circuit board in 3D

    Usb c

    jessfraz/usbc-pal

    This is a slighly modified version of pd-buddy.

    34 parts10
  • 4 layers42.4 × 21 mmUsb c otter, the printed circuit board in 3D

    Usb c otter

    lucysrausch/usb-c-otter

    USB PD trigger with XT60 out and WS2812 / APA102 LED pads.

    45 parts6
  • 4 layers30 × 37.2 mmPd buddy sink, the printed circuit board in 3D

    Pd buddy sink

    psten/pd-buddy-sink

    This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.

    43 parts1
  • 2 layers78.5 × 61 mmKiCad PCB Assessment, the printed circuit board in 3D

    KiCad PCB Assessment

    iamkaifpathaan/KiCad-PCB-Assessment

    PCB design assessment in KiCad - schematic to fabrication-ready manufacturing files

    28 partsMIT
  • 4 layers68.6 × 53.3 mmIcezum, the printed circuit board in 3D

    Icezum

    nicolasarcila-eng/Alhambra-II

    The project documentation is located in the wiki

    226 partsGPL-3.0
  • 2 layers50 × 20.5 mmOtterIron PRO Bot, the printed circuit board in 3D

    OtterIron PRO Bot

    Jana-Marie/Otter-Iron-PRO

    USB-PD soldering station for JBC C245 handles.

    47 parts321

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the DMP3017SFG?

Yes. The symbol is Pinmap_Generic:Q_PMOS_1S_2S_3S_4G_5D and the footprint EasyEDA_Cloud:POWERDI3333-8_L3.3-W3.3-P0.65-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the DMP3017SFG?

PowerDI3333-8, with 5 pins. Its footprint is drawn on this page.

Where is the DMP3017SFG datasheet?

Diodes Incorporated publishes it: the Datasheet link on this page opens it.

Where can I order the DMP3017SFG?

JLCPCB lists it as part C461072, with 0 in stock; the sellers' links on this page open their listings.

What can replace the DMP3017SFG?

Parts like it in the library: the DMN6069SFGQ by Diodes Incorporated, the DMN6069SFG by Diodes Incorporated, the DMT47M2SFVWQ by Diodes Incorporated and the DMTH43M8LFGQ by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the DMP3017SFG?

8 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.