2 layers50 × 55.4 mm
SOIC-8-EP
AP6502SP
Diodes Incorporated
-40℃~+85℃ 1 1.5mA 2A 340kHz 4.7V~18V 925mV~16V Adjustable Buck Built-in Overcurrent Protection、Adjustable soft-start、Cycle-by-cycle current limiting、External compensation Step-down type Yes SOIC-8-EP DC-DC Converters ROHS
Extended
- Category
- DC DC Converters
- Package
- SOIC-8-EP
- Pins
- 9
Overview
The AP6502SP is a DC DC Converter made by Diodes Incorporated in a SOIC-8-EP package with 9 pins. -40℃~+85℃ 1 1.5mA 2A 340kHz 4.7V~18V 925mV~16V Adjustable Buck Built-in Overcurrent Protection、Adjustable soft-start、Cycle-by-cycle current limiting、External compensation Step-down type Yes SOIC-8-EP DC-DC Converters ROHS.
PCBKit's library has its KiCad symbol (Regulator_Switching:AP6502, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C155221). 5 open-source boards in 5 repositories on GitHub use it.
Symbol
Footprint
The library has no footprint for this part yet.
Parameters
13- Features
- Overcurrent Protection, Adjustable soft-start, Cycle-by-cycle current limiting, External compensation
- Frequency - Switching
- 340kHz
- Function
- Step-down type
- Number of Outputs
- 1
- Operating Temperature
- -40℃~+85℃
- Output Current
- 2A
- Output Type
- Adjustable
- Output Voltage
- 925mV~16V
- Quiescent Current
- 1.5mA
- Switch tube (built-in/external)
- Built-in
- Synchronous Rectifier
- Yes
- Topology
- Buck
- Voltage - Supply
- 4.7V~18V
Order codes
1- AP6502SP-13LCSC C155221
Pinout
9| Pin | Name | Type |
|---|---|---|
| 1 | BST | Output |
| 2 | IN | Power in |
| 3 | SW | Power out |
| 4 | GND | Power in |
| 5 | FB | Input |
| 6 | COMP | Output |
| 7 | EN | Input |
| 8 | SS | Tri-state |
| 9 | EP | Power in |
Open-source boards using it
All 5- 2 layers61 × 61 mm
- 2 layers84.6 × 84.6 mm
- 4 layers50 × 43 mm
Openlst hw
harmalkar/satellite-prototype
Open-source hardware and software for a satellite with a custom on-board computer to interface over I2C, SPI, and UART with a flash chip, IMU, barometer, camera, and thermal sensors. Built to fit within a 1U form factor.
98 parts1 - 4 layers100 × 60 mm
Questions
Is there a KiCad symbol and footprint for the AP6502SP?
Yes. The symbol is Regulator_Switching:AP6502, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the AP6502SP?
SOIC-8-EP, with 9 pins.
Where is the AP6502SP datasheet?
Diodes Incorporated publishes it: the Datasheet link on this page opens it.
Where can I order the AP6502SP?
JLCPCB lists it as part C155221, with 0 in stock; the sellers' links on this page open their listings.
Which open-source boards use the AP6502SP?
5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.