
SJ-43514
CUIExtended
-25℃~+85℃ 16V 3.5mm Headphone Jack 300mA 插件 Audio Connectors ROHS
- Part id
- cui/SJ-43514
- Category
- Audio Connectors
- Package
- 插件
- Pins
- 4
- In stock
- 99 at JLCPCB (C20182909)
- Used on
- 14 open-source boards
Overview
The SJ-43514 is an audio Connector made by CUI in a 插件 package with 4 pins. -25℃~+85℃ 16V 3.5mm Headphone Jack 300mA 插件 Audio Connectors ROHS.
PCBKit's library has its KiCad symbol (Celestial_Connectors:CUI SJ-43514, from Altium's library) and its footprint (Celestial_Connector_CUI:CUI SJ-43514, from Altium's library), ready for a KiCad board. 99 are in stock at JLCPCB (part C20182909). 14 open-source boards in 9 repositories on GitHub use it.
Symbol
Footprint
Pinout
4| Pin | Name | Type |
|---|---|---|
| 1 | SLEEVE | Passive |
| 2 | TIP | Passive |
| 3 | RING 1 | Passive |
| 4 | RING 2 | Passive |
- 2 layers138 × 104.8 mm

- 2 layers55.9 × 39.4 mm

Vectron sound kicad
nickbild/vectron_sound_plus
Vectron Sound Plus uses the General Instrument AY-3-8910 sound generator to produce 8-bit retro audio.
11 parts1 - 6 layers50 × 50 mm

MUSIC PLAYER
Ace6Rings/MUSIC-PLAYER
Why did I build something like this? Well, I am sick and tired of buying spotify premium every month. I looked for mp3 players online but nearly all of them have the same flaw(s).
96 partsMIT - 4 layers300 × 270 mm

- 2 layers148.7 × 142.4 mm

- 4 layers92.8 × 57.2 mm

Proton
PurdueECE-362-SSTV-Project/SSTV-Hardware
This repo contains the SCHEM and PCB files for the SSTV Receiver.
105 parts - 2 layers116.2 × 83 mm

TinyModsplit left
CharleyShattuck/Stenomod-Hardware
Open Source hardware files for Stenomod 16 hinge and TinyMods 1, 2, 3, and 4. (same firmware for StenoMod hinge and TinyMod 1, but new firmware for TinyMod 2 and new again for TinyMod 3, and then again for TinyMod4)
27 parts23 - 2 layers116.2 × 83.1 mm

TinyModsplit right
CharleyShattuck/Stenomod-Hardware
Open Source hardware files for Stenomod 16 hinge and TinyMods 1, 2, 3, and 4. (same firmware for StenoMod hinge and TinyMod 1, but new firmware for TinyMod 2 and new again for TinyMod 3, and then again for TinyMod4)
24 parts23
Questions
Is there a KiCad symbol and footprint for the SJ-43514?
Yes. The symbol is Celestial_Connectors:CUI SJ-43514 and the footprint Celestial_Connector_CUI:CUI SJ-43514, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the SJ-43514?
插件, with 4 pins. Its footprint is drawn on this page.
Where is the SJ-43514 datasheet?
CUI publishes it: the Datasheet link on this page opens it.
Where can I order the SJ-43514?
JLCPCB lists it as part C20182909, with 99 in stock; the sellers' links on this page open their listings.
Which open-source boards use the SJ-43514?
14 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.