

Keyboard firmware written in Rust
- Size
- 138 × 104.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 90
- Nets
- 75
- Pads
- 473
- Tracks, vias
- 552, 101
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 6 Aug 2022
- Updated
- 1 Jan 2025
Overview
Bd1 is an open-source printed circuit board by n8tlarsen, from the n8tlarsen/oxikey repository on GitHub, published under the MIT licence. It is a 2-layer board of 138 × 104.8 mm with 90 parts on 75 nets, routed with 552 tracks and 101 vias.
It is built around the SJ-43514. Its parts include 30 capacitors, 28 resistors, 21 switches, 5 connectors and 3 diodes. It belongs with the STM32 boards of this library.
Main components
1README
README.mdOxikey
The Rust infused, ultra-clean firmware library for building custom keyboards and other HID USB devices.
Parts
90| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 470 | Resistor_SMD:R_0603_1608Metric | R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25 +8 |
| 21 | PG1350 | S1, S2, S3, S4, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21 +5 | |
| 21 | 4700p | Capacitor_SMD:C_0603_1608Metric | C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25 +5 |
| 5 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R3, R4 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C7, C8, C9 |
| 3 | LED | Diode_SMD:D_0603_1608Metric | D1, D2, D3 |
| 2 | SJ-43514 | Conn_CUI_SJ-4351:CUI-SJ-43514-SMT-0 | J3, J30 |
| 2 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_JAE_DX07S016JA1R1500 | J2, J20 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | AP2127N-3.3 | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | Conn_02x03_Odd_Even | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J1 |
| 1 | LOGO | lib:Signature | G*** |
| 1 | STM32L412CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
More from n8tlarsen/oxikey
1- 2 layers138 × 104.8 mm

Similar boards
- 2 layers55.9 × 39.4 mm

Vectron sound kicad
nickbild/vectron_sound_plus
Vectron Sound Plus uses the General Instrument AY-3-8910 sound generator to produce 8-bit retro audio.
11 parts1 - 6 layers50 × 50 mm

MUSIC PLAYER
Ace6Rings/MUSIC-PLAYER
Why did I build something like this? Well, I am sick and tired of buying spotify premium every month. I looked for mp3 players online but nearly all of them have the same flaw(s).
96 partsMIT - 4 layers300 × 270 mm

- 2 layers148.7 × 142.4 mm

- 4 layers92.8 × 57.2 mm

Proton
PurdueECE-362-SSTV-Project/SSTV-Hardware
This repo contains the SCHEM and PCB files for the SSTV Receiver.
105 parts - 2 layers116.2 × 83 mm

TinyModsplit left
CharleyShattuck/Stenomod-Hardware
Open Source hardware files for Stenomod 16 hinge and TinyMods 1, 2, 3, and 4. (same firmware for StenoMod hinge and TinyMod 1, but new firmware for TinyMod 2 and new again for TinyMod 3, and then again for TinyMod4)
27 parts23 - 2 layers434.5 × 208.2 mm

Europe ergo smd
Supermagnum/Europe-ergo
A 94 key ergonomic, split keyboard suitable for European countries.
234 parts8GPL-3.0 - 2 layers140.8 × 115.6 mm

Questions
How big is the Bd1 PCB?
It measures 138 × 104.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bd1 use?
90 parts, built around the SJ-43514. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bd1 KiCad files?
From the n8tlarsen/oxikey repository on GitHub, at the commit this page was made from: the board is hardware/bd1/bd1.kicad_pcb and its schematic hardware/bd0/bd0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bd1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).