Skip to the content
12

HSMA-C170

Broadcom LimitedExtended

-40℃~+85℃ 1.9V 170° 20mA 592nm 595nm 60mW 90mcd Amber Discrete Diode 0805 LED Indication - Discrete ROHS

Part id
broadcom-limited/HSMA-C170
Category
LED Indication, Discrete
Package
0805
Pins
5
In stock
496 at JLCPCB (C7466711)
Used on
6 open-source boards

Overview

The HSMA-C170 is a LED Indication, Discrete made by Broadcom Limited in a 0805 package with 2 pins. -40℃~+85℃ 1.9V 170° 20mA 592nm 595nm 60mW 90mcd Amber Discrete Diode 0805 LED Indication - Discrete ROHS.

PCBKit's library has its KiCad symbol (Device:LED, from KiCad's library) and its footprint (LED_SMD:LED_0805_2012Metric, from KiCad's library), ready for a KiCad board. 496 are in stock at JLCPCB (part C7466711). 6 open-source boards in 4 repositories on GitHub use it.

Symbol

Device:LEDFrom KiCad's library

Footprint

12
LED_SMD:LED_0805_2012MetricFrom KiCad's library

Pinout

2
The pins of the HSMA-C170
PinNameType
1KPassive
2APassive

Open-source boards using it

6
  • 2 layers214 × 70 mmMux2Schematic, the printed circuit board in 3D

    Mux2Schematic

    hrl-labs-clinic-24-25/hardware-prototyping

    Mostly arduino code for simulating the output of the FPGA. Mainly used to control DACs with SPI.

    105 parts1
  • 6 layers157 × 73 mmDarkMagic, the printed circuit board in 3D

    DarkMagic

    whbCool/HolyGrail

    Code for the Holy Grail PCB

    212 parts1
  • 4 layers63.5 × 53.3 mmBSPD 2026, the printed circuit board in 3D

    BSPD 2026

    DukeMotorsports/2026-Test

    92 parts
  • 4 layers18 × 30.7 mmFlatPort, the printed circuit board in 3D

    FlatPort

    fire-h0und/FlatPort

    Teensy 2.0 Risc-V dropin Arduino promicro lookalike with special features

    40 partsMIT
  • 4 layers240 × 50 mmInput PCB V4, the printed circuit board in 3D

    Input PCB V4

    hrl-labs-clinic-24-25/hardware-prototyping

    Mostly arduino code for simulating the output of the FPGA. Mainly used to control DACs with SPI.

    86 parts1
  • 2 layers214 × 36 mmMux pcb, the printed circuit board in 3D

    Mux pcb

    hrl-labs-clinic-24-25/hardware-prototyping

    Mostly arduino code for simulating the output of the FPGA. Mainly used to control DACs with SPI.

    83 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the HSMA-C170?

Yes. The symbol is Device:LED and the footprint LED_SMD:LED_0805_2012Metric, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the HSMA-C170?

0805, with 2 pins. Its footprint is drawn on this page.

Where is the HSMA-C170 datasheet?

Broadcom Limited publishes it: the Datasheet link on this page opens it.

Where can I order the HSMA-C170?

JLCPCB lists it as part C7466711, with 496 in stock; the sellers' links on this page open their listings.

What can replace the HSMA-C170?

Parts like it in the library: the KT-0805G by Hubei KENTO Elec, the NCD0805R1 by Foshan NationStar Optoelectronics, the XL-2012UGC by XINGLIGHT and the KT-0805W by Hubei KENTO Elec. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the HSMA-C170?

6 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.