Skip to the content
1234

A-1JB

AmphenolExtended

1 2mm 50Ω 6GHz Board Side IPEX Male Pin - Coaxial Connectors (RF) ROHS

Part id
amphenol/A-1JB
Category
Coaxial Connectors (RF)
Pins
4
In stock
4,243 at JLCPCB (C599198)
Used on
7 open-source boards

Overview

The A-1JB is a coaxial Connector made by Amphenol with 4 pins. 1 2mm 50Ω 6GHz Board Side IPEX Male Pin - Coaxial Connectors (RF) ROHS.

PCBKit's library has its footprint (EasyEDA_Cloud:IPEX-SMD_4P-L2.6-W2.6-LS3.0_GT-RF1125A-01G, from EasyEDA), ready for a KiCad board. 4,243 are in stock at JLCPCB (part C599198). 7 open-source boards in 6 repositories on GitHub use it.

Symbol

The library has no symbol for this part yet.

Footprint

1234
EasyEDA_Cloud:IPEX-SMD_4P-L2.6-W2.6-LS3.0_GT-RF1125A-01GFrom EasyEDA

Open-source boards using it

7
  • 4 layers43 × 89 mmReflowControllerV2, the printed circuit board in 3D

    ReflowControllerV2

    walclu/smartReflow

    Repository for STM32WB55 based reflow toaster oven controller.

    99 parts15
  • 4 layers55 × 35 mmBeaglephone pocket, the printed circuit board in 3D

    Beaglephone pocket

    HologramEducation/beaglephone-pocket

    A cellular add-on board for the BeaglePocket

    269 parts13CC-BY-4.0
  • 4 layers32 × 18 mmWingbeat detector, the printed circuit board in 3D

    Wingbeat detector

    peterpolidoro/wingbeat_detector

    Measures fly wingbeats using IR light reflected from flapping fly wings.

    38 parts3GPL-3.0
  • 4 layers25.4 × 33 mmMinimus Prime, the printed circuit board in 3D

    Minimus Prime

    HologramEducation/Minimus-Prime

    An experiment to shrink cellular connectivity

    157 parts1CC-BY-4.0
  • 4 layers45 × 45 mmTa comm, the printed circuit board in 3D

    Ta comm

    CMUAbstract/tartan-artibeus-hw

    Tartan Artibeus hardware

    50 parts5
  • 4 layers43 × 43 mmTa comm-401, the printed circuit board in 3D

    Ta comm-401

    CMUAbstract/tartan-artibeus-hw

    Tartan Artibeus hardware

    56 parts5

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the A-1JB?

Yes. the footprint EasyEDA_Cloud:IPEX-SMD_4P-L2.6-W2.6-LS3.0_GT-RF1125A-01G, both drawn on this page. PCBKit places them on a board for you when you design with it.

Where is the A-1JB datasheet?

Amphenol publishes it: the Datasheet link on this page opens it.

Where can I order the A-1JB?

JLCPCB lists it as part C599198, with 4,243 in stock; the sellers' links on this page open their listings.

What can replace the A-1JB?

Parts like it in the library: the IPEX-1 by ZIISOR, the RF-002 by Yuandi, the BX-RF2-2Z1.25H by Bossie and the U.FL-IPEX-1 by XUNPU. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the A-1JB?

7 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.