

Wingbeat detector
Measures fly wingbeats using IR light reflected from flapping fly wings.
- Size
- 32 × 18 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 52
- Pads
- 143
- Tracks, vias
- 259, 6
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 15 Aug 2022
- Updated
- 15 Mar 2024
Overview
Wingbeat detector is an open-source printed circuit board by peterpolidoro, from the peterpolidoro/wingbeat_detector repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 32 × 18 mm with 38 parts on 52 nets, routed with 259 tracks and 6 vias.
It is built around the UAF42AU, MAX865EUA+ and CC0402ZRY5V8BB104, with the CRCW06033M65FKEAC, A-1JB and ERA-8AEB154V among its other parts. Its parts include 11 capacitors, 11 resistors, 4 ICs, 3 connectors and 1 diode.
Main components
9UAF42AU
SOIC-16-300mil-25℃~+85℃ 6V~18V SOIC-16-300mil ADCs/DACs - Special Purpose ROHSTexas InstrumentsADCs/DACs - Special PurposeMAX865EUA+
MSOP-8MSOP-8 Charge Pumps ROHSMaxim Integrated (Analog Devices)Charge PumpsCC0402ZRY5V8BB104
0402-20%~+80% 100nF 25V Y5V 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMTCRCW06033M65FKEAC
0603-55℃~+155℃ 100mW 3.65MΩ Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface MountA-1JB
-1 2mm 50Ω 6GHz Board Side IPEX Male Pin - Coaxial Connectors (RF) ROHSAmphenolCoaxial Connectors (RF)ERA-8AEB154V
1206-55℃~+155℃ 150V 150kΩ 250mW Thin Film Resistor ±0.1% ±25ppm/℃ 1206 Chip Resistor - Surface Mount ROHSPanasonicChip Resistor - Surface MountC0402C300J5GACAUTO
040230pF 50V C0G ±5% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSKEMETMultilayer Ceramic Capacitors MLCC - SMD/SMTBPD-BQDA38V-FZ04
插件,D=4.8mmPhotodiodesAmerican Bright Optoelectronics Corporation10137062-00021LF
SMD-55℃~+85℃ 1 100V 24P 250mA、1.25A、5A Black Female Type-C USB 3.2 插件 USB Connectors ROHSAmphenolUSB Connectors
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 4.7uF | Janelia:C_0603_1608Metric | C1, C2, C3, C4, C5 |
| 4 | 0.1uF | Janelia:C_0402_1005Metric | C6, C7, C8, C9 |
| 4 | 49.9k | Janelia:R_0402_1005Metric | R1, R3, R6, R8 |
| 4 | FIDUCIAL_0.5mm_MASK1mm | Janelia:FIDUCIAL_0.5mm_Mask1mm | FID1, FID2, FID3, FID4 |
| 4 | MOUNTING_HOLE_2 | Janelia:MOUNTING_HOLE_2 | H1, H2, H3, H4 |
| 2 | 3.65M | Janelia:R_0603_1608Metric | R5, R7 |
| 2 | 68.1k | Janelia:R_0402_1005Metric | R2, R4 |
| 2 | UAF42_SMA | Janelia:SOIC-16W_7.5x10.3mm_P1.27mm | U2, U3 |
| 2 | UMC_JACK_SMD | Janelia:UMC_AMPHENOL_A-1JB | J2, J3 |
| 1 | 150k | Janelia:R_1206_3216Metric | R10 |
| 1 | 1uF | Janelia:C_0402_1005Metric | C10 |
| 1 | 249 | Janelia:R_0402_1005Metric | R9 |
| 1 | 2M | Janelia:R_1206_3216Metric | R11 |
| 1 | 30pF | Janelia:C_0402_1005Metric | C11 |
| 1 | MAX865EUA+ | Janelia:SOP65P490X110-8N | U1 |
| 1 | OPA381 | Janelia:VSON-8-1EP_3x3mm_P0.65mm_EP1.65x2.4mm | U4 |
| 1 | PHOTODIODE | Janelia:PHOTODIODE_RADIAL_RA_SMD_BRIGHT | D1 |
| 1 | USB_C_10137062-00021LF | Janelia:USB_C_Receptacle_Amphenol_10137062-00021LF | J1 |
Similar boards
- 2 layers18.5 × 31.6 mm

- 2 layers50.8 × 34 mm

- 2 layers108 × 95.3 mm

Blue Wizard
wizarddata/Blue-Wizard-Mod
Bluetooth Controller for the Kinesis Advantage line of keyboards using the BlueMicro firmware
47 parts38 - 8 layers424.5 × 336.3 mm

- 2 layers264 × 34 mm

- 4 layers43 × 89 mm

ReflowControllerV2
walclu/smartReflow
Repository for STM32WB55 based reflow toaster oven controller.
99 parts15 - 4 layers55 × 35 mm

Beaglephone pocket
HologramEducation/beaglephone-pocket
A cellular add-on board for the BeaglePocket
269 parts13CC-BY-4.0 - 6 layers50 × 50 mm

Questions
How big is the Wingbeat detector PCB?
It measures 32 × 18 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Wingbeat detector use?
38 parts, built around the UAF42AU, MAX865EUA+, CC0402ZRY5V8BB104 and CRCW06033M65FKEAC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Wingbeat detector KiCad files?
From the peterpolidoro/wingbeat_detector repository on GitHub, at the commit this page was made from: the board is wingbeat_detector/wingbeat_detector.kicad_pcb and its schematic wingbeat_detector/assembly.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Wingbeat detector design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).