
Minidisc
befinitiv/minidisc_cad
This repository contains the CAD files (PCB & mechanics) for the 8cm "minidisc" player project.
Allwinner TechExtended
QFN-88-EP(10x10) Microcontrollers (MCU/MPU/SOC) ROHS
The F1C200S is a microcontroller made by Allwinner Tech in a QFN-88-EP(10x10) package with 89 pins. QFN-88-EP(10x10) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its footprint (EasyEDA_Cloud:QFN-88_L10.0-W10.0-P0.40-BL-EP6.75, from EasyEDA), ready for a KiCad board. 1,533 are in stock at JLCPCB (part C2879851). 12 open-source boards in 11 repositories on GitHub use it.
The library has no symbol for this part yet.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Storage Temperature Tstg | min -65 · max 150 °C | 18 | |
| In/Out current for input and output II/O | min -40 · max 40 mA | 18 | |
| Power Supply for I/O VCC-IO | min -0.3 · max 3.6 V | 18 | |
| Power Supply for Codec AVCC | min -0.3 · max 3.1 V | 18 | |
| Power Supply for TV TV_AVCC | min -0.3 · max 3.6 V | 18 | |
| Power Supply for Internal Digital Logic VDD-CORE | min -0.3 · max 1.3 V | 18 | |
| Power Supply for USB UVCC | min -0.3 · max 3.6 V | 18 | |
| Power Supply for DDR1 VCC-DRAM | min -0.3 · max 2.7 V | 18 | |
| Ambient Operating Temperature[Commercial] Ta | Commercial | min -20 · max 85 °C | 18 |
| Power Supply for I/O VCC-IO | min 3 · typ 3.3 · max 3.6 V | 18 | |
| Power Supply for Codec AVCC | min 2.5 · typ 2.8 · max 3.1 V | 18 | |
| Power Supply for TV TV_AVCC | min 3 · typ 3.3 · max 3.6 V | 18 | |
| Power Supply for Internal Digital Logic VDD-CORE | min 1 · typ 1.1 · max 1.2 V | 18 | |
| Power Supply for USB UVCC | min 3 · typ 3.3 · max 3.6 V | 18 | |
| Power Supply for DDR1 VCC-DRAM | min 2.3 · typ 2.5 · max 2.7 V | 18 | |
| Low-Level Input Voltage VIL | min -0.3 V | 18 | |
| Input pull-up resistance RPU | min 50 · typ 100 · max 150 KΩ | 18 | |
| Input pull-down resistance RPD | min 50 · typ 100 · max 150 KΩ | 18 | |
| High-Level Input Current IIH | max 10 uA | 18 | |
| Low-Level Input Current IIL | max 10 uA | 18 | |
| Low-Level Output Voltage VOL | min 0 · max 0.2 V | 18 | |
| Tri-State Output Leakage Current IOZ | min -10 · max 10 uA | 18 | |
| Input Capacitance CIN | max 5 pF | 19 | |
| Output Capacitance COUT | max 5 pF | 19 | |
| Crystal Oscillator Frequency Range 1/(tCPMAIN) | typ 24 MHz | 19 | |
| Frequency Tolerance at 25°C | 25°C | min -50 · max 50 ppm | 19 |
| Maximum Change Over Temperature Range | min -50 · max 50 ppm | 19 | |
| Drive Level PON | max 300 uW | 19 | |
| Equivalent Load Capacitance CL | min 12 · typ 18 · max 22 pF | 19 | |
| Series Resistance(ESR) RS | typ 25 Ω | 19 | |
| Duty Cycle | min 30 · typ 50 · max 70 % | 19 | |
| Shunt Capacitance CSHUT | min 5 · typ 6.5 · max 7.5 pF | 19 | |
| Internal Bias Resistor RBIAS | min 0.4 · typ 0.5 · max 0.6 MΩ | 19 |

befinitiv/minidisc_cad
This repository contains the CAD files (PCB & mechanics) for the 8cm "minidisc" player project.


MillerTechnologyPeru/boysenboard
Linux capable single board computer using the F1C200s in an Arduino form-factor.

victorhook/F1C200S-Dev-board
Custom PCB with the Allwinner F1C200S SoC, built to learn more about embedded Linux!


clarkmcc/my-first-linux-board
my-first-linux-board is a small F1C200S Linux board built around removable microSD storage, USB-C power and USB device data, a 3.3 V UART console, and power/status LEDs.

JoachimBose/nabby-linux
An Allwinner F1C100s / F1C200s buildroot external tree for (among others) the hardware challenge for VUCTF-2026

JubilantMarmot/pcc5
This is my first PCB project. It took me around 20 hours. It is a small Linux computer that is the size of a business card. Based off of Allwinner F1C200s.
Yes. the footprint EasyEDA_Cloud:QFN-88_L10.0-W10.0-P0.40-BL-EP6.75, both drawn on this page. PCBKit places them on a board for you when you design with it.
QFN-88-EP(10x10), with 89 pins. Its footprint is drawn on this page.
Allwinner Tech publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C2879851, with 1,533 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the F1C100S by Allwinner Tech, the D133CBS by Artinchip, the D133CCS by Artinchip and the D211BCV by Artinchip. Check their datasheets: a part that fits the footprint may still differ in its ratings.
12 boards in 11 repositories on GitHub; the most starred are listed on this page, with their KiCad files.