
LT3097ADJC#PBF
Analog DevicesExtended
-40℃~+125℃@(Tj) 0.8uVrms、0.8uVrms 0V~15V、0V~19.5V 2 2.2uA 20V 235mV@(500mA)、260mV@(500mA) 500mA、500mA 74dB@(1MHz)、76dB@(1MHz) Adjustable Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Operating status indication、Reverse polarity voltage protection、Reverse-polarity current protection、Adjustable current limiting Positive and Negative DFN-22-EP(3x6) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS
- Part id
- adi/LT3097ADJC#PBF
- Category
- Uncategorised
- Package
- DFN-22-EP(3x6)
- Pins
- 24
- In stock
- 4 at JLCPCB (C7495294)
- Used on
- 2 open-source boards
Overview
The LT3097ADJC#PBF is an uncategorised made by Analog Devices in a DFN-22-EP(3x6) package with 24 pins. -40℃~+125℃@(Tj) 0.8uVrms、0.8uVrms 0V~15V、0V~19.5V 2 2.2uA 20V 235mV@(500mA)、260mV@(500mA) 500mA、500mA 74dB@(1MHz)、76dB@(1MHz) Adjustable Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Operating status indication、Reverse polarity voltage protection、Reverse-polarity current protection、Adjustable current limiting Positive and Negative DFN-22-EP(3x6) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LT3097ADJC#PBF, from EasyEDA) and its footprint (EasyEDA_Cloud:DFN-22_L6.0-W3.0-P0.50-BL-EP-1, from EasyEDA), ready for a KiCad board. 4 are in stock at JLCPCB (part C7495294). 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
Pinout
24| Pin | Name | Type |
|---|---|---|
| 1 | INP | Unspecified |
| 2 | INP | Unspecified |
| 3 | ENP/UVP | Unspecified |
| 4 | PGP | Unspecified |
| 5 | ILIMP | Unspecified |
| 6 | INN | Unspecified |
| 7 | INN | Unspecified |
| 8 | ENN/UVN | Unspecified |
| 9 | PGN | Unspecified |
| 10 | PGFBN | Unspecified |
| 11 | ILIMN | Unspecified |
| 12 | SETN | Unspecified |
| 13 | GND | Unspecified |
| 14 | OUTSN | Unspecified |
| 15 | OUTN | Unspecified |
| 16 | OUTN | Unspecified |
| 17 | PGFBP | Unspecified |
| 18 | SETP | Unspecified |
| 19 | GND | Unspecified |
| 20 | OUTSP | Unspecified |
| 21 | OUTP | Unspecified |
| 22 | OUTP | Unspecified |
| 23 | GND | Unspecified |
| 24 | INN | Unspecified |
Open-source boards using it
2- 6 layers254 × 130 mm

- 4 layers99.6 × 99.6 mm

Themis tc2
thomabir/themis-motor
Hardware and software for a direct-drive brushless DC motor and encoder.
109 parts
Parts like it
1Questions
Is there a KiCad symbol and footprint for the LT3097ADJC#PBF?
Yes. The symbol is EasyEDA_Cloud:LT3097ADJC#PBF and the footprint EasyEDA_Cloud:DFN-22_L6.0-W3.0-P0.50-BL-EP-1, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LT3097ADJC#PBF?
DFN-22-EP(3x6), with 24 pins. Its footprint is drawn on this page.
Where is the LT3097ADJC#PBF datasheet?
Analog Devices publishes it: the Datasheet link on this page opens it.
Where can I order the LT3097ADJC#PBF?
JLCPCB lists it as part C7495294, with 4 in stock; the sellers' links on this page open their listings.
What can replace the LT3097ADJC#PBF?
Parts like it in the library: the LT3097ADJC#TRPBF by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the LT3097ADJC#PBF?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.