Skip to the content
12345

ADP7142AUJZ-5.0-R7

Analog DevicesExtended

-40℃~+125℃@(Ta) 1 11uVrms 200mA 40V 5V 88dB@(10kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
adi/ADP7142AUJZ-5.0-R7
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TSOT-23-5
Pins
5
In stock
2,536 at JLCPCB (C659367)
Used on
7 open-source boards

Overview

The ADP7142AUJZ-5.0-R7 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Analog Devices in a TSOT-23-5 package with 5 pins. -40℃~+125℃@(Ta) 1 11uVrms 200mA 40V 5V 88dB@(10kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:ADP7142AUJZ-5.0, from KiCad's library) and its footprint (Package_TO_SOT_SMD:TSOT-23-5, from KiCad's library), ready for a KiCad board. 2,536 are in stock at JLCPCB (part C659367). 7 open-source boards in 7 repositories on GitHub use it.

Symbol

1VIN2GND3EN4SENSE/ADJ5VOUT
Regulator_Linear:ADP7142AUJZ-5.0From KiCad's library

Footprint

12345
Package_TO_SOT_SMD:TSOT-23-5From KiCad's library

Pinout

5
The pins of the ADP7142AUJZ-5.0-R7
PinNameType
1VINPower in
2GNDPower in
3ENInput
4SENSE/ADJInput
5VOUTPower out

Open-source boards using it

7
  • 2 layers160 × 120 mmSTM, the printed circuit board in 3D

    STM

    jherkenhoff/STM

    DIY scanning tunneling microscope (STM)

    307 parts88
  • 2 layers88.6 × 69.9 mmExpressionController, the printed circuit board in 3D

    ExpressionController

    amonbenson/expad

    A four-jack USB MIDI adapter for expression and sustain pedals, built on a Raspberry Pi Pico 2 W. It works out what is plugged into each jack - whichever contact a pedal's wiper is on, and whether it is a potentiometer…

    147 partsMIT
  • 4 layers300 × 270 mmTbox, the printed circuit board in 3D

    Tbox

    charlieh0tel/ee_stuff

    440 partsBSD-3-Clause
  • 2 layers78 × 62.5 mmScr23-sens to can, the printed circuit board in 3D

    Scr23-sens to can

    m888r/scr23-analog-to-can

    USC Racing 2023 FSAE Car Analog/Digital to CAN module

    62 parts
  • 4 layers99.9 × 99.9 mmSignal generator, the printed circuit board in 3D

    Signal generator

    Pejo-306/digital-function-generator-v2

    Цифров генератор на сигнали с тъчскрийн

    157 partsMIT
  • 2 layers21.8 × 20.8 mmSiot node current clamp, the printed circuit board in 3D

    Siot node current clamp

    simpleiot/hardware

    Hardware designs for IoT devices and sensor nodes.

    9 parts9Apache-2.0
  • 4 layers84.8 × 84.3 mmBeuty, the printed circuit board in 3D

    Beuty

    HrishikeshMRao/Electronics_Hardware_Projects

    Find my simulation files and PCB_Designs here

    58 parts2

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ADP7142AUJZ-5.0-R7?

Yes. The symbol is Regulator_Linear:ADP7142AUJZ-5.0 and the footprint Package_TO_SOT_SMD:TSOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADP7142AUJZ-5.0-R7?

TSOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the ADP7142AUJZ-5.0-R7 datasheet?

Analog Devices publishes it: the Datasheet link on this page opens it.

Where can I order the ADP7142AUJZ-5.0-R7?

JLCPCB lists it as part C659367, with 2,536 in stock; the sellers' links on this page open their listings.

What can replace the ADP7142AUJZ-5.0-R7?

Parts like it in the library: the SPX3819M5-L-5-0 by TECH PUBLIC, the BL8075CB5TR50 by BL, the DS8241-50S5 by DSTECH and the AP2204K-5.0TRG1(MS) by MSKSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADP7142AUJZ-5.0-R7?

7 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.