Skip to the content
12345

ADP7142AUJZ-2.5-R7

Analog DevicesExtended

Thermal shutdown、Enable control、Input under-voltage protection、Adjustable soft-start、Built-in soft start TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
adi/ADP7142AUJZ-2.5-R7
Category
Uncategorised
Package
TSOT-23-5
Pins
5
In stock
0 at JLCPCB (C116796)
Used on
6 open-source boards

Overview

The ADP7142AUJZ-2.5-R7 is an uncategorised made by Analog Devices in a TSOT-23-5 package with 5 pins. Thermal shutdown、Enable control、Input under-voltage protection、Adjustable soft-start、Built-in soft start TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:ADP7142AUJZ-2.5, from KiCad's library) and its footprint (Package_TO_SOT_SMD:TSOT-23-5, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C116796). 6 open-source boards in 5 repositories on GitHub use it.

Symbol

1VIN2GND3EN4SENSE/ADJ5VOUT
Regulator_Linear:ADP7142AUJZ-2.5From KiCad's library

Footprint

12345
Package_TO_SOT_SMD:TSOT-23-5From KiCad's library

Pinout

5
The pins of the ADP7142AUJZ-2.5-R7
PinNameType
1VINPower in
2GNDPower in
3ENInput
4SENSE/ADJInput
5VOUTPower out

Open-source boards using it

6
  • 2 layers48.8 × 18.5 mmCurmea, the printed circuit board in 3D

    Curmea

    Ledger-Donjon/curmea

    To analyze the power consumption of a component, it is common to measure the current going to the ground by placing a small resistor and measuring the voltage across it.

    30 parts2LGPL-3.0
  • 2 layers88.6 × 69.9 mmExpressionController, the printed circuit board in 3D

    ExpressionController

    amonbenson/expad

    A four-jack USB MIDI adapter for expression and sustain pedals, built on a Raspberry Pi Pico 2 W. It works out what is plugged into each jack - whichever contact a pedal's wiper is on, and whether it is a potentiometer…

    147 partsMIT
  • 2 layers177.8 × 82.6 mmBaku, the printed circuit board in 3D

    Baku

    Demonpore-sys/baku

    49 parts
  • 6 layers69.7 × 114.8 mmLow noise power probe, the printed circuit board in 3D

    Low noise power probe

    blinken/power-rail-probe

    Low-noise oscilloscope power rail probe

    118 parts101
  • 4 layers49.4 × 111.4 mmEeg hardware v1, the printed circuit board in 3D

    Eeg hardware v1

    es-ude/eeg-hardware

    Repo of the Custom Hardware Design Files of the EEG-based Gaming Controller

    412 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ADP7142AUJZ-2.5-R7?

Yes. The symbol is Regulator_Linear:ADP7142AUJZ-2.5 and the footprint Package_TO_SOT_SMD:TSOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADP7142AUJZ-2.5-R7?

TSOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where can I order the ADP7142AUJZ-2.5-R7?

JLCPCB lists it as part C116796, with 0 in stock; the sellers' links on this page open their listings.

What can replace the ADP7142AUJZ-2.5-R7?

Parts like it in the library: the L-TLV70225DBVR by PIELENST, the XC6228D252VR-G by TECH PUBLIC, the LR8106B-T25 by LR and the TLV75725PDBVR-MS by MSKSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADP7142AUJZ-2.5-R7?

6 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.