Skip to the content
12345

ADP7118AUJZ-5.0-R7

Analog DevicesExtended

-40℃~+125℃ 1 11uVrms 200mA 200mV@(200mA) 20V 50dB@(1MHz) 50uA 5V Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Soft Start、Enable TSOT-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
adi/ADP7118AUJZ-5.0-R7
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TSOT-5
Pins
5
In stock
2,710 at JLCPCB (C141943)
Used on
4 open-source boards

Overview

The ADP7118AUJZ-5.0-R7 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Analog Devices in a TSOT-5 package with 5 pins. -40℃~+125℃ 1 11uVrms 200mA 200mV@(200mA) 20V 50dB@(1MHz) 50uA 5V Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Soft Start、Enable TSOT-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:ADP7118AUJZ-5.0-R7, from EasyEDA) and its footprint (Package_TO_SOT_SMD:TSOT-23-5, from KiCad's library), ready for a KiCad board. 2,710 are in stock at JLCPCB (part C141943). 4 open-source boards in 3 repositories on GitHub use it.

Symbol

1VIN3EN4SS/ADJ5VOUT2GND
EasyEDA_Cloud:ADP7118AUJZ-5.0-R7From EasyEDA

Footprint

12345
Package_TO_SOT_SMD:TSOT-23-5From KiCad's library

Pinout

5
The pins of the ADP7118AUJZ-5.0-R7
PinNameType
1VINUnspecified
2GNDUnspecified
3ENUnspecified
4SS/ADJUnspecified
5VOUTUnspecified

Open-source boards using it

4
  • 4 layers60 × 81 mmMYSTAT, the printed circuit board in 3D

    MYSTAT

    matthew-yates/MYSTAT

    Open source potentiostat/galvanostat hardware design files and required software.

    93 parts9GPL-3.0
  • 4 layers95.9 × 90.2 mmPCI-104-Template, the printed circuit board in 3D

    PCI-104-Template

    marian1911/Proyecto-CUBESAT-TRANSPODER-VHF-UHF

    En este repositorio se guardan todos los archivos de desarrollo referidos a el diseño y fabricacion del trasnponder VHF/UHF

    128 parts
  • 2 layers75 × 50 mmPower supply lt3571 single, the printed circuit board in 3D

    Power supply lt3571 single

    burbschat/claws_hardware

    Simple SiPM/plastic scintillator based beam loss monitors

    62 partsCERN-OHL-S-2.0
  • 4 layers75 × 50 mmReceiver, the printed circuit board in 3D

    Receiver

    burbschat/claws_hardware

    Simple SiPM/plastic scintillator based beam loss monitors

    78 partsCERN-OHL-S-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ADP7118AUJZ-5.0-R7?

Yes. The symbol is EasyEDA_Cloud:ADP7118AUJZ-5.0-R7 and the footprint Package_TO_SOT_SMD:TSOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADP7118AUJZ-5.0-R7?

TSOT-5, with 5 pins. Its footprint is drawn on this page.

Where is the ADP7118AUJZ-5.0-R7 datasheet?

Analog Devices publishes it: the Datasheet link on this page opens it.

Where can I order the ADP7118AUJZ-5.0-R7?

JLCPCB lists it as part C141943, with 2,710 in stock; the sellers' links on this page open their listings.

What can replace the ADP7118AUJZ-5.0-R7?

Parts like it in the library: the SPX3819M5-L-5-0 by TECH PUBLIC, the BL8075CB5TR50 by BL, the DS8241-50S5 by DSTECH and the AP2204K-5.0TRG1(MS) by MSKSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADP7118AUJZ-5.0-R7?

4 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.