Skip to the content
12345678

ADP1720ARMZ-3.3-R7

Analog DevicesExtended

-40℃~+125℃ -50dB@(10kHz) 1 28V 3.3V 50mA Fixed Over Current Protection、Over Temperature Protection、Enable Positive MSOP-8 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
adi/ADP1720ARMZ-3.3-R7
Category
Voltage Regulators Linear, Low Drop Out (LDO) Regulators
Package
MSOP-8
Pins
8
In stock
25 at JLCPCB (C658905)
Used on
3 open-source boards

Overview

The ADP1720ARMZ-3.3-R7 is a voltage Regulators Linear, Low Drop Out (LDO) Regulator made by Analog Devices in a MSOP-8 package with 8 pins. -40℃~+125℃ -50dB@(10kHz) 1 28V 3.3V 50mA Fixed Over Current Protection、Over Temperature Protection、Enable Positive MSOP-8 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1GND_2IN_3OUT_4EN_5GND_6GND_7GND_8GND, from PCBKit's generic symbols) and its footprint (Package_SO:MSOP-8_3x3mm_P0.65mm, from KiCad's library), ready for a KiCad board. 25 are in stock at JLCPCB (part C658905). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

IN2EN4OUT3GND1
Pinmap_Generic:Regulator_Linear_1GND_2IN_3OUT_4EN_5GND_6GND_7GND_8GNDFrom PCBKit's generic symbols

Footprint

12345678
Package_SO:MSOP-8_3x3mm_P0.65mmFrom KiCad's library

Pinout

8
The pins of the ADP1720ARMZ-3.3-R7
PinNameType
1GNDPower in
2INPower in
3OUTPower out
4ENInput
5GNDPassive
6GNDPassive
7GNDPassive
8GNDPassive

Open-source boards using it

3
  • 2 layers93.6 × 55 mmNeurolab, the printed circuit board in 3D

    Neurolab

    fossasia/neurolab-hardware

    Neurolab Hardware

    174 parts1.6kApache-2.0
  • 2 layers48.1 × 30.4 mmThermometer Schematic, the printed circuit board in 3D

    Thermometer Schematic

    pavlovvalkan/AD7124-4BRUZ-RL-Based-PCB

    AD7124-4BRUZ-RL Based PCB for Two 4-Wire P100 RTD Kelvin Measurement

    45 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ADP1720ARMZ-3.3-R7?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1GND_2IN_3OUT_4EN_5GND_6GND_7GND_8GND and the footprint Package_SO:MSOP-8_3x3mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADP1720ARMZ-3.3-R7?

MSOP-8, with 8 pins. Its footprint is drawn on this page.

Where is the ADP1720ARMZ-3.3-R7 datasheet?

Analog Devices publishes it: the Datasheet link on this page opens it.

Where can I order the ADP1720ARMZ-3.3-R7?

JLCPCB lists it as part C658905, with 25 in stock; the sellers' links on this page open their listings.

What can replace the ADP1720ARMZ-3.3-R7?

Parts like it in the library: the MIC5219-3.3YMM by Microchip Technology, the MIC5219-3.3YMM-TR by Microchip Technology, the LT1962EMS8-3.3#PBF by Analog Devices and the LT1962EMS8-3.3#TRPBF by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADP1720ARMZ-3.3-R7?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.