
Digirig mobile
softcomplex/Digirig-Mobile
Integrated digital modes interface for amateur radio
Analog Devices
±15 kV ESD Protected, 3.3 V Single-Channel RS-232 Line Driver/Receiver
The ADM3101EARQ is an uncategorised made by Analog Devices in a SSOP16 package with 16 pins. ±15 kV ESD Protected, 3.3 V Single-Channel RS-232 Line Driver/Receiver.
PCBKit's library has its KiCad symbol (Analog & Interface:ADM3101EARQ, from CERN's library) and its footprint (Package_SO:SSOP-16_5.3x6.2mm_P0.65mm, from KiCad's library), ready for a KiCad board. 2 open-source boards in 2 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | C1- | Passive |
| 2 | C1+ | Passive |
| 3 | NC | Passive |
| 4 | ROUT | Output |
| 5 | TIN | Input |
| 6 | NC | Power in |
| 7 | V+ | Power in |
| 8 | VCC | Power in |
| 9 | GND | Power in |
| 10 | V- | Power in |
| 11 | NC | Power in |
| 12 | TOUT | Output |
| 13 | RIN | Input |
| 14 | NC | Power in |
| 15 | C2- | Passive |
| 16 | C2+ | Passive |

softcomplex/Digirig-Mobile
Integrated digital modes interface for amateur radio

weirdgyn/Driverino
BLDC motor driver based on Arduino Micro Pro and TI MCT8316ZR
Yes. The symbol is Analog & Interface:ADM3101EARQ and the footprint Package_SO:SSOP-16_5.3x6.2mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
SSOP16, with 16 pins. Its footprint is drawn on this page.
Parts like it in the library: the MOLI3004BABN by MOLI, the LTC2600CGN by Analog Devices, the AD5570ARS by Analog Devices and the ADCMP551BRQ by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.